In this paper, the formation and thermal stability of Ni-silicide using Ni-Pd alloys is studied for ultra shallow S/D junction of nano-scale CMOSFETs. There are no different effects when Ni-Pd is used in single structure and TiN capping structure. But, in case of Cobalt interlayer structure, it was found that Pure Ni had lower sheet resistance than Ni-Pd, because of a thick silicide. Also, Ni-Pd has merits that surface of silicide and interface between silicide and silicon have a good morphology characteristics. As a result, Ni-Pd is an optimal candidate for shallow S/D junction when cobalt is used for thermal stability.
새만금 농업단지가 조성됨에 따라 농업용수 공급이 요구되며, 농업적 측면에서 염분은 작물 재배시 생육에 영향을 미치는 항목으로 농업용수 공급시 철저한 관리가 요구된다. 따라서 농작물에 영향을 미치지 않는 농업용수 공급을 위해 염분계측을 통한 체계적인 농업용수 관리가 필요하다. 본 연구에서는 새만금호내에 관측되는 염분 시계열 자료를 모의하기 위해서 자기회귀모형을 기반으로 한 Two-Stage ARX 모형을 개발하였다. 층별로 나눠진 염분자료를 계층적 Bayesian기법을 활용하여 매개변수를 확률분포형으로 추정하였으며 염분모의의 불확실성을 제시하였다. 최적 모형을 선정하기 위해서 통계적 지표인 BIC값을 이용하였으며, 최종적으로 선정된 모형을 통해 양수장 인근 수역의 염분 모의 결과를 제시하였다.
This paper presents a new design algorithm for piece-removing dynamical system, based on 6-Sigma DMADOV technique using ARIZ and Brainstorming. Our design target is the piece-removing system installed on a mobile platform of bead-grinding equipment. The 6-Sigma DMADOV technique guides us design process according to 6 steps, i.e., Define - Measure - Analyze - Design - Optimize - Verify. A Design strategy to reduce the weight of piece-removing dynamical system will be explored by using ARIZ, i.e.,(the abbreviation of Algorithm for Inventive Problem Solving in Russian). The ARIZ will result in a final solution that the height and angle control parts for a cutting tool should be replaced by a kinematical approach, rather than complicated mechatronic approach(using motors). The Optimize step is composed of two sub-steps: (i) Generating process for obtaining several ideas of piece-removing system by using Brainstorming technique, satisfying the final solution derived from the Design step using ARIZ, and (ii) Optimizing process for selecting the most optimal idea of piece-removing system by using Pugh's matrix from the viewpoints of weight, cost and accuracy. The laststep of Verify has shown that the final design obtained by the 6-Sigma DMADOV technique with ARIZ & Brainstormingcan improve an initial design with design requirements satisfied. In this paper, we have shown that ARIZ and Brainstorming can be cooperatively merged into 6-Sigma DMADOV to give us both a formulatedproblem-solving approach and diverse candidate solutions(or ideas) without trial-and-error efforts.
The silver thick film has been used in many industries such as display, chip, solar cell, automobile, and decoration with conventional heating. The silver thick film is fired with optimal time and temperature. However, decreasing the fabrication time is required due to high production power. Furthermore, there is a problem that silver in electrode is diffused throughout any substrates. For inhibiting the Ag diffusion and long fabrication time we considered a microwave heating. We investigated firing of silver thick film with conventional and microwave heating. The temperature of substrate was measured by thermal paper and the temperature of substrate was under $100\;^{\circ}C$ The shrinkage of electrode was measured with optical microscopy and optical profilometry. The shrinkage of electrode heat treated with microwave for 5min was similar to the that fired by the conventional heating for several hours. After firing by two types of heating, the diffusion of silver was determined using a optical microscope. The microstructure of sintered silver thick film was observed by SEM. Based on our results, the microwave heating should be a candidate heating source for the fabrication electronic devices in terms of saving the tact time and preventing the contamination of substrate.
Huong, Le Thi Thanh;Tan, Phan Minh;Hoa, Tran Thi Viet;Lee, Soo
한국응용과학기술학회지
/
제26권1호
/
pp.1-9
/
2009
Nowadays, Tra catfish fat is given attention as an appropriate material for biodiesel production in Vietnam. The aim of this work is to investigate the optimal conditions of refining biodiesel and recovering glycerin by the transesterification from Tra catfish fat using KOH catalyst. As our results, the yield of transesterification was achieved to 94.17% at $50^{\circ}C$ for 45 min with 6:1 molar ratio of methanol to fat in the presence of 0.8% KOH catalyst, and wherein the biodiesel was refined by washing with distilled water at $70^{\circ}C$ and dried in a microwave oven. The yield of raw glycerin recoveries from the transesterification process was 78.58%. The purity of raw glycerin was 84.14% by the conditions of neutralization state with $H_{3}PO_{4}$ solution (pH = 5), $70^{\circ}C$, and 60 min. Activated carbon (3.0 wt.%) was used for the bleaching process at $80^{\circ}C$ for 20 min. The biodiesel was obtained in accordance with for ASTM D 6751 (biodiesel standard). The ash and water of raw glycerins were 7.32 and 8.01%, respectively, and implied that the raw glycerin is very promising candidate to be used as a raw material for textile and cosmetic industries.
Journal of Advanced Marine Engineering and Technology
/
제32권8호
/
pp.1248-1256
/
2008
In this paper, basic characteristics of transmission line employing PPGM (periodically perforated ground metal) were investigated using theoretical and experimental analysis.According to the results, unlike the conventional PBG (photonic band gap) structures, the characteristic impedance of the transmission line employing PPGM structure showed a real value, which exhibited a very small dependency on frequency. The transmission line employing PPGM structure showed a loss (per quarter wave length) higher by $0.1{\sim}0.2\;dB$ than the conventional microstrip line. According to the investigation of the dependency of RF characteristic on ground condition, the RF characteristic of the transmission line employing PPGM structure was hardly affected by the ground condition in the frequency lower than Ku band, but fairly affected in the frequency higher than Ku band, which indicated that coplanar waveguide employing PPGM structure was optimal for RF characteristic and reduction of size. Considering above results, impedance transformer was developed using coplanar waveguide with PPGM structure for the first time, and good RF characteristics were observed from the impedance transformer. In case that {\lambda}/4$ impedance transformer with a center frequency of 9 GHz was fabricated for a impedance transformation from 20 to10 {\Omega}$, the line width and length were 20 and $500\;{\mu}m$, respectively, and its size was only 0.64 % of the impedance transformer fabricated with conventional microstrip lines. Above results indicate that the transmission line employing PPGM is a promising candidate for a development of matching and passive elements on MMIC.
Algicidal bacterium was isolated from sea water during the declining period of Cochlodinium polykrikoides blooms and this bacterium had a significant algicidal activity against C. polykrikoides. In this study, algicidal bacterium was identified on the basis of biochemical and chemotaxonomic characteristics, and analysis of 16S rDNA sequences. The algicidal bacterium showed 98.6% homology with Micrococcus luteus ATCC $381^T$. Therefore, this bacterium was designated Micrococcus luteus SY-13. The optimal culture conditions of the algicidal bacterium was $25^{\circ}C$, initial pH 8.0, and 3.0% NaCl concentration. M. luteus SY-13 is assumed to produce secondary metabolites which have algicidal activity. When 10% culture filtrate of this strain was applied to C. polykrikoides ($1.0\;{\times}\;10^4\;cells/ml$) cultures, over 98% of C, polykrikoides cells were destroyed within 6 hours. The culture filtrate of M. luteus SY-13 exhibited similar algicidal activity after heat-treatment at $121^{\circ}C$ for 15 min. While algicidal activity remained in filtrates with pH adjusted to 8.0, loss of algicidal activity occurred when the pHs of filtrates were adjusted to over 9.0 or heat-treated at $121{\times}180^{\circ}C$ for 1 hour. M. luteus SY-13 showed significant algicidal activities against C. polykrikoides (98.9%) and a wide algicidal range against various harmful algal bloom (HAB) species. However, there was no algicidal effect on diatom and marine livefood organisms except Isocrysis galbana. These results suggest that M. luteus SY-13 could be a candidate for use in the control of HABs.
비선호시설의 노선선정 과정에서는 노선선정 절차, 지역주민의 NIMBY 현상 등으로 인해 많은 갈등이 발생하고 있다. 특히 입지선정과 운영을 둘러싼 사회적 갈등은 전체 갈등 사례 중 70%를 차지할 정도로 자주 발생하고 있으며, 갈등으로 인해 많은 손실을 야기하고 있다. 지속적인 갈등 해결을 위해서는 사회적 갈등을 고려한 최적 노선선정이 이루어져야 한다. 이에 본 연구는 송전선로 시설을 대상으로 사회적 갈등을 고려하여 개선된 경과지 선정 프로세스를 제시하고자 한다. 우선 기존 사회적 갈등에 관한 연구동향 분석 및 전문가 인터뷰를 통해 비선호시설의 개선된 배제구역 기준 및 고려인자와 우선순위를 도출하였다. 이후 도출된 배제구역 기준 및 고려인자를 실제 밀양시 사례를 대상으로 후보 노선을 선정하였으며, Fuzzy-TOPSIS를 활용하여 최적 노선을 선정하였다. 실무 측면에서 83.3%가 본 프로세스에 있어 사회적 갈등을 최소화하며 적용에 대한 타당성을 검증하였다. 본 연구에서 제시하고 있는 프로세스는 사업 초기 송전선로 경과지 선정과정에서 사회적 갈등을 최소화하기 위한 도구로써 활용이 가능할 것으로 예상된다.
Lim, An Suk;Jeong, Hae Jin;You, Ji Hyun;Park, Sang Ah
ALGAE
/
제35권3호
/
pp.277-292
/
2020
Omega-3 fatty acids, including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), are polyunsaturated fatty acids beneficial to human health. A limited number of microalgae have been used for commercial omega-3 production, which necessitates the identification of new microalgae with high omega-3 contents. We explored the fatty acid composition and EPA and DHA contents of the mixotrophic dinoflagellate Gymnodinium smaydae fed with the optimal algal prey species Heterocapsa rotundata. Cells of G. smaydae were found to be rich in omega-3 fatty acids. In particular, the DHA content of G. smaydae was 21 mg g-1 dry weight, accounting for 43% of the total fatty acid content. The percentage of DHA in the total fatty acid content of G. smaydae was the highest among the reported microalgae except for Crypthecodinium cohnii. Moreover, to determine if the prey supply interval affected the growth rate of G. smaydae and its fatty acid content, three different prey supply intervals (daily, once every 2 d, and once for 4 d) were tested. Daily prey supply yielded the highest total fatty acid and DHA contents in G. smaydae. Furthermore, we successfully produced high-density G. smaydae cultures semi-continuously for 43 d with daily prey supply. During the semi-continuous cultivation period, the highest density of G. smaydae was 57,000 cells mL-1, with an average growth rate of 0.7 d-1. Taken together, the percentage of EPA and DHA in the total fatty acid content was maintained in the range of 54.2-56.9%. The results of this study support G. smaydae as a promising microalgal candidate for commercial DHA production and demonstrate that daily supply of prey can efficiently produce high-density G. smaydae cultures for more than a month.
The increasing demand of the crops (soybean and corn) for biofuel production has increased the focus of the animal nutritionists to look for alternative feeds, which are economic and environmental friendly. To identify microalgae as suitable candidate as an alternative feed, growth response of Chlorella vulgaris was studied under varying concentrations of carbon dioxide (0.07, 1.4, 3.0 and 5.0%) and photon densities (39.19, 72.97, 105.41, 116.22, 135.14, $175.68\;{\mu}mol/m^2/s$) by employing a photo-bioreactor. Swine wastewater was also investigated as nutritional source to economize the biomass production. Results showed that the higher biomass production was found to be at 3.0% $CO_2$ compared to other $CO_2$ concentrations. However, no difference in biomass production was found at $105.41\;{\mu}mol/m^2/s$ and above photon densities with 12 h of photoperiodicity. It was observed that C. vulgaris could easily grow in 200 times diluted swine wastewater and growth was found to be similar with that of artificial medium. Provided the conducive conditions for optimal growth, it has also the potentiality of depleting ammonia nitrogen ($NH_4$-N) and orthophosphate ($PO_4^{3-}$-P) completely from the wastewater after 3~4 days of cultivation. Thus, growing C. vulgaris would not only solve the problem of animal feed, but also help in biological $CO_2$ mitigation and wastewater treatment.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.