• Journal of Advanced Marine Engineering and Technology
• /
• 제26권5호
• /
• pp.544-553
• /
• 2002

The recent amount of container freight continuously has been increased, but the low efficiency of container crane causes jamming frequently in transportation and cargo handling at port. It is required that the working velocity and safety are improved by control of moving the trolley as quick as possible without large overshoot and any residual swing motion of container at the destination. In this paper, a LQ controller for a container crane is proposed to accomplish an optimal design of improved control system for minimizing the swing motion at destination. In this scheme a mathematical model for the system is obtained in state space form. Finally, the effectiveness of the proposed controller is verified through computer simulation.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.158-167
• /
• 1997

For the use of a mobile robot in dynamic environment, a collision-avoidance algorithm with moving obsta- cle is necessary. In this paper, a collsion-avoidance algorithm of a mobile robot is presented, when a mobile robot detects the collision with moving obstacle on the navigational path. Using reported positions of moving obstacle with sensors, the mobile robot predicts the next position of moving obstacle with possibility of collision. The velocity of moving obstacle is modeled as random walk process with Gaussian distribution. The optimal collision-avoidance path in which turning motion of the mobile robot is considered is generated with relative velocity between the mobile robot and moving obstacle. For the safety of collision-avoidance path, attractive potential with the safety factor is suggested. The simulation results using this algorithm show the mobile robot avoids collision with moving obstacle in many cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.153-158
• /
• 2004

In this paper, we proposed a two-stage control of the container crane. The first stage control is time-optimal control for the purpose of fast trolley traveling. With suitable trolley velocity patterns, the sway which is generated during trolley moving is minimized. At the second stage control feedback control law is investigated for the quick suppression of residual vibration after the trolley motion. For more practical system, the container crane system is modeled as a partial differential equation (PDE) system with flexible cable. The dynamics of the cable is derived as a moving system with tension caused by payload using Hamilton's principle for the systems. A control law based upon the Lyapunov's method is derived. It is revealed that a time-varying control force and a suitable passive damping at the actuator can successfully suppress the transverse vibrations.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권7호
• /
• pp.329-334
• /
• 2005

This paper presents the optimal design for reducing the rotor inertia in order to improve the driving characteristic of BLDC motor for robots. The parallel Genetic Algorithm is performed to rotor inertia minimization in optimal design. Also, velocity profile with finite jerk method is introduced to reduce vibration of BLDC motor. As a result, a torque characteristic is same although rotor inertia is reduced to 2/3 compared with prototype model. And, maximum vibration value is reduced by 63.4[$\%$] according to the application of finite .jerk method.

• 융합신호처리학회논문지
• /
• 제7권1호
• /
• pp.38-44
• /
• 2006

The omnidirectional mobility of a mobile robot may lose significance in motion control, unless the isotropy characteristics of the mechanism is maintained well. This paper investigates the local and global isotropy of an omnidirectional mobile robot with three caster wheels. All possible actuations with different number and combination of rotating and steering joints are considered. First, the kinematic model based on velocity decomposition and the algebraic conditions for the local isotropy are obtained. Second, the geometric conditions for the local isotropy are derived and all isotropic configurations are fully identified. Third, the global isotropy index is examined to determine the optimal parameters in terms of actuation set, characteristic length, and steering link length.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.13-21
• /
• 2004

GPS is widely used in various applications since GPS receivers are capable of measuring precise position and velocity in any weather condition for a relatively low cost. However, GPS requires more than four simultaneously visible GPS satellites for optimal performance. In high-motion, high-attitude-changing applications, there exist some situations where less than four satellites are visible or where the dilution of precision (DOP) is high. In this paper, we propose a simulation algorithm that predicts the performance of GPS navigation according to changes in vehicle attitude. We have compared simulation results with experimental results, where simulation results of the proposed algorithm are shown to closely match actual experimental data. This algorithm could be used to predict GPS navigational performance and to determine optimal GPS antenna position.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.730-737
• /
• 1988

본 연구에서는 로봇 매니퓰레이터의 각 조인트 토오크를 구하고, 이를 최소자 승법에 의하여 각 링크의 길이를 최적화하였다. 이때 각 링크의 단면은 일정하며 따 라서 각 링크의 무게중심은 링크의 중앙에 있다고 보았다. 작업은 직선운동(C.P)으 로 하였고 이때의 소고 선도를 편의상 삼각형으로 하였다. 작업시간은 속도선도와 작업경로가 주어지면 구하여지고, 이를 등간격으로 나누어 매 순간마다의 조인트 토오 크를 구하였다. 이때 매 순간 기구학적 해석으로 조인트의 변위, 속도, 가속도를 구 하고 Newton-Euler 운동방정식을 이용하여 각 조인트 토오크를 구하였다.

• 자동차안전학회지
• /
• 제11권3호
• /
• pp.30-36
• /
• 2019

This paper suggests a car-following algorithm for urban environment, with multiple target candidates. Until now, advanced driver assistant systems (ADASs) and self-driving technologies have been researched to cope with diverse possible scenarios. Among them, car-following driving has been formed the groundwork of autonomous vehicle for its integrity and flexibility to other modes such as smart cruise system (SCC) and platooning. Although the field has a rich history, most researches has been focused on the shape of target trajectory, such as the order of interpolated polynomial, in simple single-lane situation. However, to introduce the car-following mode in urban environment, realistic situation should be reflected: multi-lane road, target's unstable driving tendency, obstacles. Therefore, the suggested car-following system includes both in-lane preceding vehicle and other factors such as side-lane targets. The algorithm is comprised of three parts: path candidate generation and optimal trajectory selection. In the first part, initial guesses of desired paths are calculated as polynomial function connecting host vehicle's state and vicinal vehicle's predicted future states. In the second part, final target trajectory is selected using quadratic cost function reflecting safeness, control input efficiency, and initial objective such as velocity. Finally, adjusted path and control input are calculated using model predictive control (MPC). The suggested algorithm's performance is verified using off-line simulation using Matlab; the results shows reasonable car-following motion planning.

• 한국산업융합학회 논문집
• /
• 제19권2호
• /
• pp.81-87
• /
• 2016

This paper presents a new approach to control of stable motion of single wheel driving robot system of a pitch that is controlled by an in-wheel motor and a roll that is controlled by a reaction wheel. This robot doesn'thave any actuator for a yaw axis control, which makes the derivation of the dynamics relatively simple. The Lagrange equations was applied to derive the dynamic equations of the one wheel driving robot to implement the dynamic speed control of the mobile robot. To achieve the real time speed control of the unicycle robot, the sliding mode control and optical regulator are utilized to prove the reliability while maintaining the desired speed tracking performance. In the roll controller, the sigmoid-function based robust controller has been adopted to reduce the vibration by the situation function. The optimal controller has been implemented for the pitch control to drive the unicycle robot to follow the desired velocity trajectory in real time using the state variables of pitch angle, angular velocity, angle and angular velocity of the driving wheel. The control performance of the control systems from a single dynamic model has been illustrated by the real experiments.

• Wind and Structures
• /
• 제38권2호
• /
• pp.119-128
• /
• 2024

The aerodynamic damping is an essential factor that can considerably affect the dynamic response of the cable-stayed bridge induced by crosswind load. However, developing an accurate and efficient aerodynamic damping model is crucial for evaluating the crosswind load-induced response on cable-stayed bridges. Therefore, this study proposes a new method for identifying aerodynamic damping of the bridge structures under crosswind load using an extended Kalman filter (EKF) and the particle filter (PF) algorithm. The EKF algorithm is introduced to capture the aerodynamic damping ratio. PF technique is used to select the optimal spectral representation of the noise. The effectiveness and accuracy of the proposed solution were investigated through full-scale vibration measurement data of the crosswind-induced on the bridge's girder. The results show that the proposed solution can generate an efficient and robust estimation. The errors between the target and extracted values are around 0.01mm and 0.003^o, respectively, for the vertical and torsional motion. The relationship between the amplitude and the aerodynamic damping ratio is linear for small reduced wind velocity and nonlinear with the increasing value of the reduced wind velocity. Finally, the results show the influence of the level of noise.