• 오토저널
• /
• 제14권6호
• /
• pp.113-126
• /
• 1992

Recently the multi-kind, small-amount manufacturing system has been replacing the mass manufacturing system, and domestic machining inustry also is eager to absorb the new technology because of its high productivity and cost reduction. The optimization of the cutting condition has been a vital problem in the machining industry, which would help increase the productivity and raise the international competitiveness. It is intended in this study to investigate the machining costs per unit time which is essential to the analysis of the optimal cutting condition, to computer the cutting speed that lead to the minimum machining costs and the maximum production to suggest the cutting speed range that enables efficient speed cutting, and to review the machining economy in relation to cutting depth and feed. Also considered are the optimal cutting speed and prodution rated in rrelation with feed. It is found that the minimum-cost cutting speed increases and the efficient cutting speed range is reduced as machining cost per unit time increases since the cutting speed for maximum production remains almost constant. The machining cost is also lowered and the production rate increases as the feed increases, and the feed should be selected to satisfy the required surface roughness. The machining cost and production rate are hardly affected by the cutting depth if the cutting speed stays below 100m/min, however, they are subject to change at larger cutting depth and the high-efficient speed range also is restricted. It can be established an adaptive optimal cutting conditions can be established in workshop by the auto-selection progam for optimal operation. It is expected that this method for choosing the optimal cutting conditions might contribute to the improvement of the productivity and reduced the cost. It is highly recommended to prepare the optimal cutting conditionthus obtained for future use in the programing of G-function of CNC machines. If proper programs that automatically select the optimal cutting conditions should be developed, it would be helpful to the works being done in the machine shops and would result in noticeable production raise and cost reduction.

• 산업식품공학
• /
• 제21권1호
• /
• pp.79-87
• /
• 2017

본 연구는 홍삼정과 부산물의 산업적 이용성 증대를 위하여 중 반응표면분석법을 이용한 추출수율 및 총 진세노사이드 함량 추출 최적조건을 찾는데 목적이 있다. 추출용매 농도(에탄올, 30-70%, v/v), 추출온도($25-70^{\circ}C$), 추출시간(5-11 hr) 등의 독립변수를 D-optimal design을 통하여 실험계획하고, 얻어진 실험결과를 반응표면분석하여 추출수율, 총 진세노사이드 함량 등의 반응변수에 대한 최적 추출조건을 검토하였다. 그 결과, 독립변수인 추출온도와 시간이 증가함에 따라 수율 및 총 진세노사이드 함량은 증가하였으나, 추출용매(에탄올)의 경우 고농도에서 수율은 감소한 반면, 추출물 중 총 진세노사이드 함량은 증가하였다. 독립변수 중 추출용매의 농도가 각 반응변수에 가장 큰 영향을 주는 것으로 나타났다. 본 연구를 통해서 유도된 회귀식 모형은 실험을 통해 얻은 결과와 잘 일치하였고, 추출수율과 총 진세노사이드 함량을 최대로 하는 최적 조건은 추출용매농도 57.90% (v/v), 추출온도 $56.94^{\circ}C$, 추출시간 11시간으로 이 경우 추출수율은 84.52%, 총 진세노사이드 함량은 9.54 mg/g으로 예측하였다.

• 한국환경과학회지
• /
• 제31권8호
• /
• pp.715-725
• /
• 2022

Lactic Acid Bacteria (LAB) are among the representative probiotics that have been used for a long time in fermented food. Although there are many studies on detecting the radical scavenging activity of LAB, few studies have been conducted on the environmental factors that improve scavenging activity. This study investigated the environmental factors affecting the DPPH radical scavenging and various antioxidant activities of Kimchi-derived Lactobacillus plantarum K-21 with antihypertensive and radical scavenging activities. The optimal conditions for scavenging DPPH radicals were glucose 2%, bactopeptone 0.5%, Tween 80 0.05%, L-cysteine 0.05%, and an initial pH 6.5 at 35℃. Under optimal conditions, the DPPH radical scavenging activity was 94.8±2.2%, which was 1.5 times higher than that of the basic medium. In addition, L. plantarum K-21 had other antioxidant activities; ABTS radical scavenging (93.6±1.5%), hydroxyl radical scavenging (8.5±0.9%), metal chelating (65.9±0.5%), NO scavenging (53.1±19%), SOD-like (25.1±1.5%), and reducing power (11.7±1.4%) activities were detected. Therefore, L. plantarum K-21 may act not only as a starter for lactic acid-fermented foods with improved functionality but also as a drug for various diseases caused by oxidative stress.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.96-104
• /
• 2017

A one-shot system (device) refers to a system that is stored for a long period of time and is then disposed of after a single mission because it is accompanied by a chemical reaction or physical destruction when it operates, such as shells, munitions in a defense weapon system and automobile airbags. Because these systems are primarily related with safety and life, it is required to maintain a high level of storage reliability. Storage reliability is the probability that the system will operate at a particular point in time after storage. Since the stored one-shot system can be confirmed only through inspection, periodic inspection and maintenance should be performed to maintain a high level of storage reliability. Since the one-shot system is characterized by a large loss in the event of a failure, it is necessary to determine an appropriate inspection period to maintain the storage reliability above the reliability goal. In this study, we propose an optimal inspection policy that minimizes the total cost while exceeding the reliability goal that the storage reliability is set in advance for the one-shot system in which periodic inspections are performed. We assume that the failure time is the Weibull distribution. And the cost model is presented considering the existing storage reliability model by Martinez and Kim et al. The cost components to be included in the cost model are the cost of inspection $c_1$, the cost of loss per unit time between failure and detection $c_2$, the cost of minimum repair of the detected breakdown of units $c_3$, and the overhaul cost $c_4$ of $R_s{\leq}R_g$. And in this paper, we will determine the optimal inspection policy to find the inspection period and number of tests that minimize the expected cost per unit time from the finite lifetime to the overhaul. Compare them through numerical examples.

• 디지털융복합연구
• /
• 제11권9호
• /
• pp.159-166
• /
• 2013

본 연구에서는 소프트웨어 제품을 개발하여 테스팅을 거친 후 사용자에게 인도하는 시기를 결정하는 방출문제에 대하여 연구 하였다. 소프트웨어의 결함을 제거하거나 수정 작업과정에서 유한고장수를 가진 비동질적인 포아송과정에 기초하였다. 수명강도는 다양한 형상모수와 척도모수에 이용 할 수 있기 때문에 신뢰성 분야에서 많이 사용되는 비선형 특성을 가진 반-로지스틱 분포 모형을 이용한 방출시기에 관한 문제를 제시하였다. 소프트웨어 요구 신뢰도를 만족시키고 소프트웨어 개발 및 유지 총비용을 최소화 시키는 최적 소프트웨어 방출 정책에 대하여 논의 되었다. 본 논문의 수치적인 예에서는 고장 시간 자료를 적용하였으며 모수추정 방법은 최우추정법을 이용하고 최적 방출시기를 추정하였다. 따라서 소프트웨어 방출시기를 사전 정보로 활용하면 잠재적 보안피해액을 줄 일 수 있다고 판단된다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제2권1호
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design

• Journal of Biosystems Engineering
• /
• 제38권3호
• /
• pp.180-184
• /
• 2013

Purpose: This study explored the factors influencing heating value in the process of torrefaction of water hyacinth. Methods: Torrefaction was applied with three temperature settings (200, 300, $400^{\circ}C$) and three time settings (1, 2, 3 h) using small electric heaters (11.3L of holding volume). This study investigated the heating values with the washing process and process factors influenced the torrefaction. In addition, this study compared the heating values in washed and unwashed samples and suggested the optimal conditions for increasing heating value. Results: Torrefaction increased the heating value by 8.18 ~ 30.04%. Comparing heating values of each condition, the optimal temperature for torrefaction was $300^{\circ}C$ and holding time was 1 hour. The washing process increased the heating value by 19 ~ 27%. The heating value of the sample treated at $300^{\circ}C$ for three hours was 4310.80 kcal/kg, which was greater than the first class wood pellet of 4300 kcal/kg. Conclusions: This study proved that the torrefaction and washing process increased the heating value of water hyacinth. Therefore, water hyacinth is expected to be an eco-friendly biomass which substitutes for wood pellet.

• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.271-294
• /
• 2014

In recent years, along with the advances made in performance-based design optimization, the need for fast calculation of response parameters in dynamic analysis procedures has become an important issue. The main problem in this field is the extremely high computational demand of time-history analyses which may convert the solution algorithm to illogical ones. Two simplifying strategies have shown to be very effective in tackling this problem; first, simplified nonlinear modeling investigating minimum level of structural modeling sophistication, second, wavelet analysis of earthquake records decreasing the number of acceleration points involved in time-history loading. In this paper, we try to develop an efficient framework, using both strategies, to solve the performance-based multi-objective optimal design problem considering the initial cost and the seismic damage cost of steel moment-frame structures. The non-dominated sorting genetic algorithm (NSGA-II) is employed as the optimization algorithm to search the Pareto optimal solutions. The constraints of the optimization problem are considered in accordance with Federal Emergency Management Agency (FEMA) recommended design specifications. The results from numerical application of the proposed framework demonstrate the capabilities of the framework in solving the present multi-objective optimization problem.

• Journal of Animal Science and Technology
• /
• 제61권3호
• /
• pp.170-181
• /
• 2019

This study aimed to investigate the effects of temperature and retention time of the pressurized steam chamber on the ruminal fermentation characteristics and nutrient degradability of corn flakes in three Korean native Hanwoo cows and three Holstein cows implanted with a ruminal fistula. Corn kernels were categorized into 13 groups based on the chamber temperature (range, $100^{\circ}C-116^{\circ}C$) and retention time (range, 700-950 s). The pH value was lowest in T1 regardless of breed. Propionate concentration was the highest in T2 (p < 0.05). Total-volatile fatty acid (VFA) concentration was slightly but not significantly greater in T2 than in other conditions. Dry matter (p < 0.05), starch, and crude protein (p < 0.05) degradability were the highest in T1. At different incubation times and with different breeds, dry matter, starch, and crude protein degradability of corn flakes were the highest in T1. Thus, the present results indicate that the optimal temperature and retention time of the pressurized steam chamber should be $100^{\circ}C-105^{\circ}C$ and 700-720 s.

• 생명과학회지
• /
• 제14권4호
• /
• pp.560-566
• /
• 2004

버들송이버섯의 균사체 대량 생산의 기초자료를 얻을 일환으로 균사의 영양생장에 필요한 적합한 조건을 연구하고자 균사생장을 위한 최적 배양 조건 및 영양원을 조사한 결과는 다음과 같다 5종의 공시배지 중 ME 배지에서 버들송이 버섯의 균사생장 및 밀도가 가장 양호하였으며, 균사생장최적 온도는 $25^{\circ}C$이고, 최적 pH는 5.5이며 최적 배양일수는 12일이었다. 버들송이 버섯의 균사생장을 위한 최적 배지조성은 탄소원에서는 다당류인 dextrin이었으며, 최적 탄소원인 dextrin의 적정농도는 3% (w/v)였다. 질소원에서는 유기태 질소원인 yeast extract이었고, yeast extract 최적농도는 2% (w/v)였으며, 최적 무기염류는 MgSO$_4$와 KH$_2$PO$_4$이고, 최적 농도는 MgSO$_4$0.05% (w/v), KH$_2$PO$_4$0.15 (w/v)를 혼합하였을 때 가장 많은 생산량을 보였다. 기본배지인 ME 배지와 본 연구에서 얻어진 최적배지로 액체 배양하여 균체량을 비교한 결과 기본배지는 배양 12일째 최대 건조 균체량 7.59 g/l을 얻었으며, 최적배지는 배양 12일째 17.6 g/l의 최대 건조 균체량을 얻어 기본배지 보다 최적배지의 균체량이 훨씬 높은 균사체 생산수율을 보였다.