• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.565-570
• /
• 2007

Fiber reinforced polymer(FRP) composite decks are new to bridge applications and hence not much literature exists on their structural mechanical behavior. As there are many differences between numerical displacements through static analysis of the primary model and experimental displacements through static load tests, system identification (SI)techniques such as Neural Networks (NN) and support vector machines (SVM) utilized in the optimization of the FE model. During the process of identification, displacements were used as input while stiffness as outputs. Through the comparison of numerical displacements after SI and experimental displacements, it can note that NN and SVM would be effective SI methods in modeling an FRP deck. Moreover, two methods such as response surface method and iteration were proposed to optimize the estimated stiffness. Finally, the results were compared through the mean square error (MSE) of the differences between numerical displacements and experimental displacements at 6 points.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.375-382
• /
• 2006

This paper is about how to identify emotional information and how to detect a specific emotion from speech signals. For emotion identification and detection task. we use long-term acoustic feature parameters and select the optimal Parameters using the feature selection technique based on F-score. We transform the conventional SVM into probabilistic output SVM for our emotion identification and detection system. In this paper we propose three approximation methods for log-likelihoods in a hypothesis test and compare the performance of those three methods. Experimental results using the SUSAS database showed the effectiveness of both feature selection and Probabilistic output SVM in the emotion identification task. The proposed methods could detect anger emotion with 91.3% correctness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.901-905
• /
• 2005

It is very important to arrange landmarks when a mobile robot needs to measure its own location. So, it has been discussed often how to arrange landmarks in the optimal way until now. We, there, chose the RFID (Radio frequency Identification) tags as landmarks which can be observed by a mobile robot, and demonstrated the possibility of the optimal arrangement of them. For this work first, we defined the optimization problem and its parameters for the arrangement of tags. Second, we proposed the algorithm which can be applied to the optimization problem. Finally we could obtain closely optimal and practical arrangement with the minimum number of landmarks which satisfied the necessary condition by experimentation.

• Journal of Power System Engineering
• /
• v.12 no.2
• /
• pp.55-61
• /
• 2008

This paper discusses the advantages of using Fourier-based periodic excitation and of combining internal and external models in dynamic robot parameter identification. Internal models relate the joint torques or forces with the motion of the robot; external models relate the reaction forces and torques on the bedplate with the motion data. This combined model allows to combine joint torque/force and reaction torque/force measurements in one parameter estimation scheme. This combined model estimation will yield more accurate parameter estimates, and consequently better predictions of actuator torque, which is shown by means of a simulated experiment on a CRS A465 industrial robot.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.364-369
• /
• 2008

The FSA algorithm for identifying multiple tags in RFID systems is based on the slotted ALOHA scheme with a fixed frame size. The performance of FSA algorithm is dependent on the frame size and the number of tags in the reader's identification range. Therefore, this paper proposes a new ODFSA. The proposed ODFSA algorithm dynamically allocates the optimal frame size at every frame based on the number of tags in the reader's identification range. According to the simulation results, the system efficiency of the proposed algorithm should be maintained optimally. Also, the proposed algorithm always obtained the minimum tag identification delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1929-1945
• /
• 2011

RFID technologies have attracted a lot of attention in recent years because of their cost/time-effectiveness in large-scale logistics, supply chain management (SCM) and other various potential applications. One of the most important issues of the RFID-based systems is how quickly tags can be identified. Tag collision arbitration plays a more critical role in determining the system performance especially for passive tag-based ones where tag collisions are dealt with rather than prevented. We present a novel tag collision arbitration protocol called Optimum Frame-Slotted Aloha (OFSA). The protocol has been designed to achieve time-optimal efficiency in tag identification through an analytic study of tag identification delay and tag number estimation. Results from our analysis and extensive simulations demonstrate that OFSA outperforms other collision arbitration protocols. Also, unlike most prior anti-collision protocols, it does not require any modification to the current standards and architectures facilitating the rollout of RFID systems.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.2
• /
• pp.121-127
• /
• 2006

An analysis procedure for the combined problem of control algorithm and aeroelastic system which is based on the computational fluid dynamics(CFD) technique has been developed. The aerodynamic forces in the transonic region are calculated from the transonic small disturbance(TSD) theory. An linear quadratic regulator(LQR) controller is designed to suppress the transonic flutter. The optimal control gain is estimated by solving the discrete-time Riccati equation. The system identification technique rebuilds the CFD-based aeroelstic system in order to form an adequate system matrix which involved in the discrete-time Riccati equation. Finally the controller, that is constructed on the basis of system identification technique, is used to suppress the flutter phenomenon of the airfoil with attached store. This approach, that is, the CFD-based aeroservoelasticity design, can be utilized for the development of effective flutter controller design in the transonic region.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.200-205
• /
• 1993

A design method of rule-based fuzzy modeling is presented for the model identification of complex and nonlinear systems. Three kinds of method for fuzzy modeling presented in this paper include simplified inference (type 1), linear inference (type 2), and modified linear inference (type 3). The fuzzy c-means clustering and modified complex methods are used in order to identify the preise structure and parameter of fuzzy implication rules, respectively and the least square method is utilized for the identification of optimal consequence parameters. Time series data for gas funace and sewage treatment processes are used to evaluate the performances of the proposed rule-based fuzzy modeling.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.384-386
• /
• 2009

This paper introduces an effectively optimized Fuzzy model identification by means of complex and nonlinear system applying PSO algorithm. In other words, we use PSO(Particle Swarm Optimization) for identification of Fuzzy model structure and parameter. PSO is an algorithm that follows a collaborative population-based search model. Each particle of swarm flies around in a multidimensional search space looking for the optimal solution. Then, Particles adjust their position according to their own and their neighboring-particles experience. This paper identifies the premise part parameters and the consequence structures that have many effects on Fuzzy system based on PSO. In the premise parts of the rules, we use triangular. Finally we evaluate the Fuzzy model that is widely used in the standard model of gas data and sew data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.33.1-33
• /
• 2001

We address a novel approach to identify a nonlinear dynamic system for Wiener models, which are composed of a linear dynamic system part followed by a nonlinear static part. The aim of system identification here is to provide the optimal mathematical model of both the linear dynamic and the nonlinear static parts in some appropriate sense. Assuming the nonlinear static part is invertible, we approximate the inverse function by a piecewise linear function. We estimate the piecewise linear inverse function by using the evolutionary computation approach such as genetic algorithm (GA) and evolution strategies (ES), while we estimate the linear dynamic system part by the least squares method. The results of numerical simulation studies indicate the usefulness of proposed approach to the Wiener model identification.