There are two goals in this paper. The one is development of existing CA(Cellular Automata) model to explain more realistic deceleration process to stop. The other is the application of the updated CA model to forecasting simulation to predict short term link travel time that takes a key rule in finding the shortest path of route guidance system of ITS. Car following theory of CA models don't makes not response to leading vehicle's velocity but gap or distance between leading vehicles and following vehicles. So a following vehicle running at free flow speed must meet steeply sudden deceleration to avoid back collision within unrealistic braking distance. To tackle above unrealistic deceleration rule, “Slow-to-stop” rule is integrated into NaSch model. For application to interrupted traffic flow, this paper applies “Slow-to-stop” rule to both normal traffic light and random traffic light. And vehicle packet method is used to simulate a large-scale network on the desktop. Generally, time series data analysis methods such as neural network, ARIMA, and Kalman filtering are used for short term link travel time prediction that is crucial to find an optimal dynamic shortest path. But those methods have time-lag problems and are hard to capture traffic flow mechanism such as spill over and spill back etc. To address above problems. the CA model built in this study is used for forecasting simulation to predict short term link travel time in Kangnam district network And it's turned out that short term prediction simulation method generates novel results, taking a crack of time lag problems and considering interrupted traffic flow mechanism.
The Journal of Korean Institute of Communications and Information Sciences
/
제36권4A호
/
pp.369-379
/
2011
During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.
NIAST has developed the artificial cultivation technique of entomopathogenic fungus, Isaria sinclairii by using the silkworm. NIAST is planning to provide the silkworm farmers the guidance of the technique. Screening of pharmacologically active principles of I. sinclairii is needed to register the fungal breeding, attain the approval of food materials, and ultimately position the fungus as a high value-added product. The result of investigating the characteristics of Isaria sinclairii was showed that conidia were irregularly long oval-shaped and measured 6.33$\times$3.33 $\mu\textrm{m}$ in average The optimal condition of cultivating hyphae was pH 5.0 in acidity and 21- $25^{\circ}C$ in temperature. And the best condition of producing conidia was pH 6.0 in acidity and 16-$20^{\circ}C$ in temperature.
Journal of Korean Tunnelling and Underground Space Association
/
제24권6호
/
pp.539-552
/
2022
In the case of train stations, due to the specificity of underground spaces with limited smoke emissions, if appropriate removal equipment is not equipped, the damage caused by fire smoke may increase in the event of a fire. As a result, the need for measures to ensure the safety of evacuation of underground stations has been highlighted, and research for safe evacuation of platform users in case of fire is continuously being conducted at home and abroad. However, although the smoke removal area is currently divided by smoke boundary walls and platform screen doors (PSD) and installed in the train platform, standards for smoke removal methods (air supply or exhaust) for each fire removal area, that is, smoke removal mode, are not presented. In this study, fire analysis and evacuation analysis were performed to estimate the number of deaths and to derive F/N guidance in order to quantitatively evaluate the fire risk according to the fire station fire, and the total risk was the lowest in the case of fire area exhaust and supply to adjacent areas.
Kim, Tae Wan;Lee, Sang Ki;Shin, Dong Min;Lee, Sung Pil
Journal of Service Research and Studies
/
제8권4호
/
pp.13-29
/
2018
The final goal of this study was to develop an optimal service scenario to ensure that building occupants can be effectively evacuated from the building within the golden time without extra assistance in preparing and evacuating for fires. In addition, the research was carried out by dividing the current services into fire evacuation and preparedness phases by applying the Double Diamond process in order to find a way to better familiar them as a lifestyle and to always be prepared for fires. For the building occupants and managers, a total of 14 ideas were first suggested, including not only the services of how to evacuate from a fire, but also the life-style service functions associated with fire implementation technology in daily life. The 14 proposed ideas were conducted by the Service quality evaluation and Analytical Hierarchy Process(AHP) from the perspective of the service recipient, and those were finally prioritized from the service provider's perspective, taking into account the cost and practicality of the service provider. The results of this study show that differences in the importance of fire phases considered by stakeholders and the perception of fire generally vary considerably.
Background: Patients with autism spectrum disorder (ASD) present challenges in dental treatment cooperation owing to deficits in communication skills and social interaction. Behavioral guidance, sedation, and general anesthesia may be employed to ensure the quality of dental care for individuals with ASD. This study aimed to examine the trends in dental treatment for patients with ASD who visited the Department of Pediatric Dentistry at Dankook University Jukjeon Dental Hospital, an oral health center for the disabled in the Gyeonggi region, over the past 10 years. Methods: This study utilized the order communication system to gather data on sex, age, cooperation level, number of quadrants treated, and administration of sedation or general anesthesia for patients with ASD who visited the Department of Pediatric Dentistry at Dankook University Jukjeon Dental Hospital between January 2013 and December 2022. Results: The total number of patients with ASD increased annually, possibly due to an increase in ASD prevalence and the hospital's designation as a center for disabled oral health. General anesthesia was predominant before 2017, with a shift towards N2O-O2 sedation. The most common age group for sedation or general anesthesia was 6-9 years, with a higher prevalence in males than in females. Notably, N2O-O2 and midazolam sedation resulted in better cooperation and fewer treated teeth than general anesthesia. Conclusion: This study highlights the evolving trends in dental treatment for individuals with ASD, indicating a shift towards outpatient methods, particularly N2O-O2 sedation. The sex distribution aligns with national statistics, emphasizing a higher prevalence of ASD in males than in females. These findings underscore the need for further research to establish evidence-based guidelines for optimal dental care strategies tailored to the unique needs of individuals with ASD.
The Journal of The Korea Institute of Intelligent Transport Systems
/
제4권1호
/
pp.15-29
/
2005
Truck Shipment Safety Information, which is a part of the development of NERIS is divided into Optimal Route Guidance System and Emergency Response System. This research is for establishing an advance warning system, which aims for preventing damages(fire, explosion, gas-escape etc.) and detecting incidents that are able to happen during transporting hazardous materials in advance through monitoring the position of moving vehicles and the state of hazardous materials in real-time. This research is peformed to confirm the practical possibility of application of the advance warning system that monitors whether the hazardous materials transport vehicles move the allowed routes, finds the time and the location of incidents of the vehicles promptly and develops the emergency system that is able to respond to the incidents as well by using the technologies of CPS, CDMA and CIS with testing the ability of performance. As the results of the test, communication accuracies are 99$\%$ in freeway, 96$\%$ in arterial, 97$\%$ in hilly sections, 99$\%$ in normal sections, 96$\%$ in local sections, 99$\%$ in urban sections and 98$\%$ in tunnels. According to those results, the system has been recorded a high success rate of communication that enough to apply to the real site. However, the weak point appeared through the testing is that the system has a limitation of communication that is caused in the rural areas and certain areas where are fewer antennas that make communication possible between on-board unit and management server. Consequently, for the practical use of this system, it is essential to develop the exclusive en-board unit for the vehicles and find the method that supplements the receiving limitation of the GPS coordinates inside tunnels. Additionally, this system can be used to regulate illegal acts automatically such as illegal negligence of hazardous materials. And the system can be applied to the study about an application scheme as a guideline for transporting hazardous materials because there is no certain management system and act of toxic substances in Korea.
Due to the recent advancement in digital imaging technology, development of intervention equipment has become generalize. Video arbitration procedure is a process to insert a tiny catheter and a guide wire in the body, so in order to enhance the effectiveness and safety of this treatment, the high-quality of x-ray of image should be used. However, the increasing of radiation has become the problem. Therefore, the studies to improve the performance of x-ray detectors are being actively processed. Moreover, this intervention is based on the reference of the angiographic imaging and 3D medical image processing. In this paper, we propose a guidance system to support this intervention. Through this intervention, it can solve the problem of the existing 2D medical images based vessel that has a formation of cerebrovascular disease, and guide the real-time tracking and optimal route to the target lesion by intervention catheter and guide wire tool. As a result, the system was completely composed for medical image acquisition unit and image processing unit as well as a display device. The experimental environment, guide services which are provided by the proposed system Brain Phantom (complete intracranial model with aneurysms, ref H+N-S-A-010) was taken with x-ray and testing. To generate a reference image based on the Laplacian algorithm for the image processing which derived from the cerebral blood vessel model was applied to DICOM by Volume ray casting technique. $A^*$ algorithm was used to provide the catheter with a guide wire tracking path. Finally, the result does show the location of the catheter and guide wire providing in the proposed system especially, it is expected to provide a useful guide for future intervention service.
Kim, Seong-Il;Choi, Woon-Shik;Kim, Ki-Sun;Hwang, Sun-jong;Ju, Eun-Hee;Kang, Huyn-Jong
대한공업교육학회지
/
제43권1호
/
pp.158-176
/
2018
The purpose of this study is to analyze the satisfaction of the manufacturing process and the satisfaction of manufacturing lesson in the lesson of model product manufacturing based on IoT(Internet of Things) for pre-service technology teachers. and we also analyzed 'smart farm' model production manufacturing among various products. The survey questionnaires with 8 questions to investigate satisfaction level of model manufacturing process, difficulties in manufacturing, and the satisfaction level of manufacturing lesson were collected from the 15 pre-service technology teachers and analyzed by using SPSS program. and The results of this study were as follows: First, the lesson satisfaction average level of pre-service technology teachers was high(M=4.22) in model product manufacturing process for the 'smart farm' model making based on the IoT. Second, the average satisfaction level of 'patent search and prior art search report writing education' was as high as 4.07. Therefore, the application of 'prior art search report writing education' showed that it helped to make the product. Third, the best high satisfaction level in the model production manufacturing procedure was 'education of inventive thinking method'(M=4.40). Therefore, the pre-service technology teachers showed that the 'education of inventive thinking methods' was very helpful from the idea design to the optimal selection of idea. The next order of satisfaction level was high(M=4.33) in 'design education and counseling' and 'guidance through selection of professor who guide the production manufacturing in addition to professors who are in charge of lesson'. Because they were helpful in solving the lack of knowledge of pre-service technology teachers. Fourth, satisfaction level with 'the presentation of model making results and exhibitions', 'presentations and participations of external event' was high (M = 4.13). Although the results of interviews with pre-service technology teachers showed that they suffered from lack of knowledge in various technologies, but it was an opportunity to learn things and felt a sense of accomplishment.
Diabetes mellitus type 2 is a metabolic disorder that is characterized by hyperglycemia (high blood sugar level) in the context of insulin resistance and relative lack of insulin. Recently, much scientific evidence has shown that the risk of diabetes mellitus type 2 could be reduced by dairy intake. A significantly strong relationship has been noted between this disease and dairy intake. In particular, from the different types of fat in dairy foods that were reported to have a beneficial impact, low-fat dairy foods have been found to have the best effect with respect to reducing the risk of diabetes mellitus type 2. Therefore, the role of specific components of dairy foods, such as calcium, vitamin D, dairy fat, and trans-palmitoleic acid, which could be responsible for this effect and for the positive effect of dairy foods in obesity and metabolic syndrome, needs to be identified. There is a strong and relatively consistent body of accumulating evidence indicating that dairy foods may significantly reduce the risk of diabetes mellitus type 2, likely in a dose-response manner. Dairy recommendations should be an essential part of public health guidance, and identifying strategies to increase dairy food consumption to optimal levels is of utmost importance. Hence, this review summarizes various positive effects of dairy foods with respect to reducing the risk of diabetes mellitus type 2, based on available evidence, and discusses the need for further research on preventing or decreasing the risk of diabetes mellitus type 2.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.