• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.289-297
• /
• 2009

We numerically analyzed flow characteristics of the polymer melt in the screw equipment using a proper modeling and investigated design parameters which have influence on the mixing performance as the capability of the screw equipment. We considered the non-Newtonian and non-isothermal flow in a single rotor equipment to investigate the mixing performance with respect to screw dimensions as shape parameter of the single rotor equipment and screw speed as process parameter. We used Bird-Carreau-Yasuda model as a viscous model of the polymer melt and the particle tracking method to investigate the mixing performance in the screw equipment and considered four mixing performance indexes: residence time distribution, deformation rate, total strain and particle standard deviation as a new mixing performance index. We compared these indexes to determine design parameters and object function. On basis of the analysis results, we carried out the optimal design by using the response surface method and design of experiments. In conclusion, the differences of results between the optimal value and numerical analysis are about 5.0%.

• 한국수소및신에너지학회논문집
• /
• 제35권1호
• /
• pp.75-82
• /
• 2024

In this study, design parameter exploration based on finite element analysis was performed to find the optimal shape of bellows, the key component of compressor-embedded refueling tank for a newly developed hydrogen refueling station capable of high-pressure charging above 900 bar. In the design parametric study, the design variables took into account the bellows shapes such as contour radius and span spacing, and the response factors were set to the maximum stress and the gap in the contact direction. In the shape design of the compressor bellows for hydrogen refueling station considered in this study, it was found that adjusting the contour span is an appropriate design method to improve the compression performance and structural safety. From the selection of optimal design, the maximum stress was reduced to 49% compared to the initial design without exceeding the material yield stress.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1618-1623
• /
• 2008

In this paper, a new design method for IMC-PID that adds a phase scaling factor of system identifications to the standard IMC-PID controller as a control parameter is proposed. Based on analytically derived frequency properties such as gain and phase margins, this tuning rule is an optimal control method determining the optimum values of controlling factors to minimize the cost function, integral error criterion of the step response in time domain, in the constraints of design parameters to guarantee qualified frequency design specifications. The proposed controller improves existing single-parameter design methods of IMC-PID in the inflexibility problem to be able to consider various design specifications. Its effectiveness is examined by a simulation example, where a comparison of the performances obtained with the proposed tuning rule and with other common tuning rules is shown.

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.19-30
• /
• 1997

인공위성 추적 안테나 제어 시스템은 로테이터에 해당하는 DC 서보모터에 의해 안테나의 방위각 및 앙각을 제어함으로써 인공위성의 현재 위치를 추적하고자 하는 시스템이다. 한편 제어 시스템의 설계를 위한 위성추적 시스템의 선형모델은 일반적인 DC 서보모터의 위치 제어 시스템과는 달리 바람에 의한 토오크 외란과 베어링 및 공기역학적 마찰로 인한 전달함수의 파라메타 변동이 존재하므로 이러한 시스템의 불확실성에도 불구하고 만족스러운 명령추종성를 가지는 강인한 제어 시스템의 설계가 요구된다. 본 연구에서는 유전 알고리즘을 사용하여 복잡한 최적화의 과정없이 가중치 함수와 설계 파라메타 ${\gamma}$를 동시에 최적화함으로써 시스템의 파라메타 변동에 대한 강인한 안정성과 기준모델에 따른 최적의 명령추종성을 가지는 위성추적 안테나 $H{\infty}$ 제어 시스템을 설계한다. 이를 위해 강인한 안정성을 가지는 해집단내에서 기준모델의 출력을 최적으로 추종하도록 유전 알고리즘을 사용하여 적절히 주어진 가중치 함수의 게인 및 동특성 파라메타와 설계 파라메타 ${\gamma}$를 동시에 최적화한다. 끝으로 컴퓨터 시뮬레이션을 통하여 설계된 위성추적 안테나 $H{\infty}$ 제어 시스템의 유용성을 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.15-17
• /
• 1999

This paper proposes that optimal design using GA of BLDC motor. To estimate this optimal design method, the performance characteristics of BLDC motor is computed by the equivalent magnetic circuit network method and FEM. To estimate especially the dynamic characteristics of BLDC, we compute the parameter of electrical circuit using FEM.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.72-78
• /
• 2010

Textile machinery affects various industry, such as sport leisure industry, metal and chemistry material, electric electron, mechanical energy, packing and printing industry. In case of design of textile machine, the very important fact is absorbing the minute vibration induced by spinning thread and insert which is the part of spindle plays a role of reduction of impact caused by oscillation of thread bobbin. Therefore, Optimal design was executed by design of experiments and kriging optimal design methods to prevent fracture of spindle insert under the fatigue condition and deduced the best value of design parameter to improve the stability of the products. The highest sensitivity is showed at the design parameter A and D. As the spiral number of insert is increase, tension force applied its edge is distributed at whole model and the stress concentration is reduced.

• Journal of the Korean Data and Information Science Society
• /
• 제7권1호
• /
• pp.47-57
• /
• 1996

일정스트레스 가속수명시험에서 제품의 수명이 대수정규분포를 따르고 위치모수와 척도모수 모두가 스트레스의 영향을 받는다고 하자. 설계 스트레스 조건에서 대수정규분포의 백분위수의 최우추정량의 점근분산이 최소가 되는 낮은 수준의 최적의 스트레스의 양과 최적의 표본할당비율을 모수의 여러 가지 경우에 대해서 연구한다.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.65-73
• /
• 2013

In this paper, design and performance analysis of robust and inexpensive permanent magnet-assisted synchronous reluctance generators (PMa-SynRG) for tactical and commercial generator sets is studied. More specifically, the optimal design approach is investigated for minimizing volume and maximizing performance for the portable generator. In order to find optimized PMa-SynRG, stator winding configurations and rotor structures are analyzed using the lumped parameter model (LPM). After comparisons of stator windings and rotor structure by LPM, the selected stator winding and rotor structure are optimized using a differential evolution strategy (DES). Finally, output performances are verified by finite element analysis (FEA) and experimental tests. This design process is developed for the optimized design of PMa-SynRG to achieve minimum magnet and machine volume as well as maximum efficiency simultaneously.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.70-70
• /
• 2009

In this paper, we proposed 2500V Non punch-through(NPT) Insulated gate bipolar transistor(IGBT) for high voltage industry application. we carried out optimal simulation for high efficiency of 2500V NPT IGBT according to size of device. In results, we obtaind design parameter with 375um n-drift thickness, 15um gate length, and 8um emitter windows. After we simulate with optimal parameter, we obtained 2840V breakdown voltage and 3.4V Vce,sat. These design and process parameter will be used designing of more 2000V NPT IGBT devices.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권2호
• /
• pp.107-116
• /
• 1994

In the manufacturing of VLSI circuits, variations of device characteristics due to the slight differences in process parameters drastically aggravate the performances of fabricated devices. Therefore, it is very important to establish optimal process conditions in order to minimize deviations of device characteristics. In this paper, we used one-dimensional process simulator, SUPREM-II, and two dimensional device simulator, MINIMOS 4.0 in order to extract optimal process parameter which can minimize changes of the device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derived the dependence relations between process parameters and device characteristics. Here, we have suggested a method to extract process parameters from design trend curve(DTC) obtained by these dependence relations. And we have discussed short channel effects and device limitations by scaling down MOSFET dimensions.