DOI QR코드

DOI QR Code

Study on Structural Performance by Shape Parameter Variation of Bellows for the Hydrogen Compressor-embedded Refueling Tank

수소압축기 내장 충전탱크용 벨로우즈의 형상 파라미터 변화에 따른 구조 성능 고찰

  • WOO CHANG PARK (WorkonSimulation Co., Ltd.) ;
  • MIN SEOK CHEONG (Department of Shipbuilding & Marine Engineering, Mokpo National University) ;
  • CHANG YONG SONG (Department of Shipbuilding & Marine Engineering, Mokpo National University)
  • 박우창 (웍크온시뮬레이션(주)) ;
  • 정민석 (국립목포대학교 조선해양공학과) ;
  • 송창용 (국립목포대학교 조선해양공학과)
  • Received : 2023.12.01
  • Accepted : 2024.02.07
  • Published : 2024.02.28

Abstract

In this study, design parameter exploration based on finite element analysis was performed to find the optimal shape of bellows, the key component of compressor-embedded refueling tank for a newly developed hydrogen refueling station capable of high-pressure charging above 900 bar. In the design parametric study, the design variables took into account the bellows shapes such as contour radius and span spacing, and the response factors were set to the maximum stress and the gap in the contact direction. In the shape design of the compressor bellows for hydrogen refueling station considered in this study, it was found that adjusting the contour span is an appropriate design method to improve the compression performance and structural safety. From the selection of optimal design, the maximum stress was reduced to 49% compared to the initial design without exceeding the material yield stress.

Keywords

Acknowledgement

본 연구는 2022년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구(No. 20223030040180, 차세대 고압(1,000기압) 수소 압축기 개발), 해양수산부의 재원으로 한국해양수산과학기술진흥원의 지원을 받아 수행한 연구 과제(No. 1525013494/PMS5390, 친환경 선박용 전기 추진 시스템 시험평가 및 무탄소연료 선박적용성 실증 기술개발) 그리고 산업통상자원부의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구(No. P0017006, 2023년 산업혁신인재성장지원사업)의 결과입니다.

References

  1. S. H. Oh and H. K. Suh, "Analysis of flow performance factors according to extreme temperature conditions of hydrogen inflow of FCEV charging system check valve", Journal of Hydrogen and New Energy, Vol. 34, No. 5, 2023, pp. 514-525, doi: https://doi.org/10.7316/JHNE.2023.34.5.514. 
  2. C. Joe, S. Kang, B. Kim, and K. Lee, "Risk assessment for high capacity multiport hydrogen refueling station", Journal of Hydrogen and New Energy, Vol. 34, No. 5, 2023, pp. 505-513, doi: https://doi.org/10.7316/JHNE.2023.34.5.505. 
  3. Y. B. Seo, G. Park, and C. Kim, "Structural design and fatigue life prediction of an ultra-high-pressure vessel (type I) to be used in a hydrogen gas station", Transactions of the Korean Society of Mechanical Engineers A, Vol. 47, No. 3, 2023, pp. 255-261, doi: https://doi.org/10.3795/KSME-A.2023.47.3.255. 
  4. J. Back, J. Mun, J. Min, K. Park, K. Ki, and S. Joo, "A numerical analysis study on charging conditions of type IV high aspect ratio modular hydrogen storage vessel", Journal of Hydrogen and New Energy, Vol. 34, No. 1, 2023, pp. 26-31, doi: https://doi.org/10.7316/KHNES.2023.34.1.26. 
  5. J. U. Baek, G. M. Gwak, N. Y. Kim, Y. M. Cho, and S. K. Lyu, "Study on the optimal design of the nozzle shape of the 700 bar hydrogen refueling nozzle for hydrogen electric vehicles", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 21, No. 7, 2022, pp. 28-33, doi: https://doi.org/10.14775/ksmpe.2022.21.07.028. 
  6. Siemens, "Element library reference", Siemens, 2014. Retrieved from https://docs.plm.automation.siemens.com/data_services/resources/nxnastran/10/help/en_US/tdocExt/pdf/element.pdf. 
  7. Siemens, "Multi-step nonlinear user's guide", Siemens, 2014. Retrieved from https://docs.plm.automation.siemens.com/data_services/resources/nxnastran/10/help/en_US/tdocExt/pdf/multi_step_nonlinear.pdf. 
  8. S. H. Park, "Design of experiments", Minyoung Publishing, Korea, 2012. 
  9. D. J. Lee, C. Y. Song, and K. Lee, "Surrogate model based approximate optimization of passive type deck support frame for offshore plant float-over installation", Journal of Ocean Engineering and Technology, Vol. 35, No. 2, 2021, pp. 131-140, doi: https://doi.org/10.26748/KSOE.2021.002. 
  10. Siemens, "HEEDS user's guide", Siemens, 2019.