• 센서학회지
• /
• 제29권3호
• /
• pp.180-186
• /
• 2020

In this study, we applied edge-pulse modulation to prevent the flicker of light-emitting diode (LED) light in a visible light identification system. In the visible light transmitter, positive pulses were transmitted at the edges of the low-to-high transition points, and negative pulses were transmitted at the edges of the high-to-low transition points of the non-return-to-zero (NRZ) data waveforms. In the visible light receiver, the NRZ waveforms were regenerated by making low-to-high and high-to-low transitions at the point of the positive and negative pulses, respectively. This method has two advantages. First, it ensures that the LED light is flicker-free because the average optical power of the LED was kept constant during data transmission in the transmitter. Second, the 120 Hz optical noise from the adjacent lighting lamps was easily cut off using a simple RC-high pass filter in the receiver.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.121-125
• /
• 1991

A basic coherent optical transmission was demonstrated using FSK modulation and heterodyne detection scheme. Optical frequency of DFB LD light source at the transmitter side was stabilized with Fabry Perot etalon and bias feedback circuit. A tunable external cavity LD was used as a local oscillator at the receiver. Heterodyned output signal at IF frequency of 2GHz was measured and discussed.

• 대한전자공학회논문지SD
• /
• 제43권7호
• /
• pp.13-19
• /
• 2006

5Gb/s대역 크로스커플 구조의 트랜스임피던스 증폭기 및 제한증폭기가 연결된 광 수신기를 광 PCB에 응용하기 위해 설계 하였다. 회로는 0.18um CMOS 공정으로 구현되었다. 광 수신기는 0.5pF 광 다이오드 기생 캐퍼시턴스에서 $92.8db{\Omega}$ 임피던스 이득과 5Gbps의 주파수 대역을 갖는다. 그리고 1.8V, 2.4V 공급전압에서 9.74mV의 전력소모를 보인다. 입력단의 임피던스는 $50{\Omega}$ 이다. 회로를 광 PCB기판에 올려 광신호 송신 실험하여 5Gb/s 데이터의 수신을 확인하였다.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.173-177
• /
• 1998

실내환경에서의 광무선 LAN은 송수신기 사이의 시정선이 성립되지 않는 경우 넓은 수광각을 얻기 위해 반구형 렌즈나 반사체를 사용해야 하며, 실내환경에서 반구형 렌즈를 사용했을 때, 교란대기를 통과하는 광신호는 진폭과 위상이 불규칙하게 변화하고, 빔을 편향시킬 수 있다. 이 페이딩은 비트오류율을 증가시켜 결국 광무선통신의 성능을 저하시키게 된다. 본 논문에서는 시정선이 성립되지 않는 광무선채널을 고려하여 수신기에 반구형 렌즈를 장착한 경우, 천정각에 따른 신호대잡음비를 고찰하고, 또한 실내온도에 기인한 교란효과가 통신성능에 미치는 영향를 살펴 본다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.654-659
• /
• 2005

An improved power supply for APD(Avalanche Photo Diode) with a received optical power monitoring circuit allows the received optical power increase temporary without of the degradation of the electrical signal. For the cost reduction and simple fabrication, an improved power supply has been proposed that it was designed for driving a APD as a receiving device of a wireless optical transmission system. It was demonstrated that it was possible to improve a dynamic range by compensating the temperature coefficient of the APD up to 1.0 V/$^{\circ}C$ through the power supply. Also, for an efficient transmission at the receiver end, a simple structure of a single cylindrical micro-lens configuration was used in conjunction with the laser diode to partially compensate a laser beam ellipticity. For this purpose, an astigmatism introduced by the micro-lens is utilized for the additional compensation of the beam ellipticity at the receiver end. In this paper, it is demonstrated that an efficient beam shaping is realized by using the proposed configuration consisting of the single lens attached to the laser diode.

• 대한전자공학회논문지SD
• /
• 제44권3호
• /
• pp.6-11
• /
• 2007

본 논문에서는 고성능 디지털 오디오 인터페이스용 CMOS 광수신기의 면적 감소와 펄스폭 왜곡을 감소시키기 위한 2종의 CMOS 광수신기를 제안한다. 면적 감소와 펄스폭 왜곡 감소를 위한 2종의 제안하는 회로는 이중 출력을 생성하는 전치 증폭기 광수신기와 문턱 전압을 수렴하는 레벨 변환기 광수신기이다. 제안한 회로들의 성능을 검증하기 위해 $0.25{\mu}m$ CMOS 공정을 이용하여 칩이 제작되었으며, 측정 결과 이중 출력 전치 증폭기를 이용한 광수신기의 경우, $270\times120{\mu}m^2$ 유효 면적을 차지하고 ${\pm}3%$ 이내의 펄스폭 왜곡을 나타내며, 문턱 전압 수렴형 레벨 변환기를 이용한 광수신기의 경우 $410\times140{\mu}m^2$의 유효 면적을 차지하고 ${\pm}2%$ 이내의 펄스폭 왜곡을 나타내므로, 고성능 디지털 오디오 인터페이스용 광수신기의 면적과 펄스폭 왜곡을 효과적으로 감소시킬 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.536-539
• /
• 2002

The use of concatenated codes in noncoherent synchronous optical fiber CDMA networks is proposed. The concatenated code sequences are generated using balanced Walsh code sequences and Walsh code sequences. The selection of balanced Walsh code sequences is presented and the design of fully programmable transmitter and receiver is reported. The analysis of the system BER performance shows that multiple-access interference is completely eliminated and the BER performance of the proposed system is better than that of the non-coherent synchronous optical fiber CDMA system using optical orthogonal codes with double hard-limiters.

• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.439-443
• /
• 2008

It is shown that even if the modulating frequency of the light is too high for direct detection the signal can be extracted by frequency conversion at the same time as the detection by means of the nonlinearity of the APD. When this frequency conversion detection is applied to an optical receiver, the detection bandwidth can be increased while the configuration of the optical detection circuit and the signal processing in the subsequent stages are simplified. A fundamental analysis is carried out with an APD which is confirmed experimentally.

• 정보통신설비학회논문지
• /
• 제4권2호
• /
• pp.29-36
• /
• 2005

All-optical fiber-type $2{\times}32$ splitters for an Ethernet PON (passive optical network) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the splitters was tested in upstream transmission of the EPON system. The $2{\times}32$ splitters was obtained by cascading $1{\times}4$ splitters fabricated by a conventional FBT process and showed -18 dB of insertion loss with 1.5 dB uniformity of output power at each channel and -0.1 dB of polarization dependent loss. The insertion loss variation was below 0.1 dB at the temperature range of $-40^{\circ}C\;to\;80^{\circ}C$. For upstream channel transmission test in the EPON system were a Zig board and a burst mode receiver. Zenko-made optical module was used for the burst mode receiver by adding functions of serializer/deserializer and clock data recovery, a Virtex II pro20 chipset and Vitesse VSC7123 were used in the Zig board for characterizing the burst mode and in the clock data recovery chipset, respectively. Startup acquisition lock time and data acquisition lock time were measured to be 670ns and 400ns, respectively, in the upstream channel transmission of the EPON system adapting the $2{\times}32$ splitter fabricated in this work.

• 한국정보전자통신기술학회논문지
• /
• 제3권1호
• /
• pp.19-23
• /
• 2010

본 연구는 전력선통신과 LED를 이용한 단거리 무선통신 시스템개발을 목적으로 하며, LED와 광센서를 이용한 광 송 수신기를 제작하고 송 수신부에 표시 장치 및 통신을 하기위한 컨넥터 등을 구성하였다. 실험 방법은 효율이 높은 LED를 선택한 후 광 센서를 통하여 나온 수신 데이터를 오실로스코프를 통하여 신호 및 파형을 관찰한다. 또한 가시광통신 프로그램을 이용하여 원활한 Data의 송 수신이 이루어지는가를 확인하였다. 이 실험을 통해 문제점을 보완하고 전력 손실에 대한 지속적인 연구 및 개선이 필요하다.