• 한국광학회지
• /
• 제24권6호
• /
• pp.318-323
• /
• 2013

디지털 홀로그래피 현미경은 기준광과 시료의 굴절률과 두께에 의한 광경로 차이를 간섭 방법을 이용하여 측정하여 3차원 형상을 측정하는 방법이다. 그리고 광 경로차는 시료의 두께와 시료와 시료 주변의 굴절률 차이에 의존한다. 시료 형상 기울기가 매우 큰 경우에는 광 경로차가 커져 일반적인 간섭 방법으로는 측정이 어렵다. 이런 경우 시료를 액체에 담그어 측정하면 광 경로차가 매우 작아져서 일반적인 간섭 방법을 이용하여 측정할 수 있다. 본 연구에서는 디지털 홀로그램 현미경과 액체를 이용하여 기울기가 큰 비구면 렌즈의 형상을 측정하는 연구를 하였다. 시료의 굴절률과 비슷한 액체를 선택함으로서 비구면 렌즈의 정밀한 3차원 측정이 가능하였다.

• 한국광학회지
• /
• 제20권2호
• /
• pp.81-86
• /
• 2009

디지털 홀로그램과 굴절률 차이를 이용하여 사용된 광원의 파장보다 큰 단차를 측정하는 연구를 하였다. 위상차를 측정하여 단차를 측정하는 방식에서는 위상차가 $2{\pi}$보다 큰 경우에는 원리상 단차를 구하기 어렵다. 이를 보완하기 위하여 굴절률 차이를 이용하여 인위적으로 광경로차를 줄여 파장보다 큰 단차를 측정할 수 있는 디지털 홀로그래피 시스템을 구성하였고, 실험적으로 파장의 약 3배 이상의 단차를 측정하였다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• Current Optics and Photonics
• /
• 제7권1호
• /
• pp.21-27
• /
• 2023

A highly sensitive optical-fiber humidity sensor is demonstrated in this paper. By using Nafion-PVA sol-gel and single-mode optical fibers, the Fabry-Perot humidity sensor is easily fabricated. In the humidity range of 29%-72%, humidity-response experiments are carried out with a cycle of rising and falling humidity to investigate humidity-response characteristics. The experimental results show 2.25 nm/%RH sensitivity and a 0.9997 linear correlation coefficient, with good consistency. The changes in optical-path difference (OPD) and free spectral range (FSR) with humidity are also discussed. The humidity sensitivities of a typical sensor are 80.3 nm/%RH (OPD) and 0.03 nm/%RH (FSR). Furthermore, many humidity sensors with different Nafion-PVA sol-gel concentration and initial cavity length are experimentally investigated for humidity response. The results show that the sensitivity increases with higher Nafion ratio of the Nafion-PVA sol-gel. The influence of changing cavity length on sensitivity is not obvious. These results are helpful to research on optical-fiber humidity sensors with good performance, easy fabrication, and low cost.

• 대기
• /
• 제14권2호
• /
• pp.11-22
• /
• 2004

A technique on atmospheric correction algorithm to the multi-band reflectance of Landsat TM imagery has been developed using an atmospheric radiation transfer model for eliminating the atmospheric and surface diffusion effects. Despite the fact that the technique of satellite image processing has been continually developed, there is still a difference between the radiance value registered by satellite borne detector and the true value registered at the ground surface. Such difference is caused by atmospheric attenuations of radiance energy transfer process which is mostly associated with the presence of aerosol particles in atmospheric suspension and surface irradiance characteristics. The atmospheric reflectance depend on atmospheric optical depth and aerosol concentration, and closely related to geographical and environmental surface characteristics. Therefore, when the effects of surface diffuse and aerosol reflectance are eliminated from the satellite image, it is actually corrected from atmospheric optical conditions. The objective of this study is to develop an algorithm for making atmospheric correction in satellite image. The study is processed with the correction function which is developed for eliminating the effects of atmospheric path scattering and surface adjacent pixel spectral reflectance within an atmospheric radiation model. The diffused radiance of adjacent pixel in the image obtained from accounting the average reflectance in the $7{\times}7$ neighbourhood pixels and using the land cover classification. The atmospheric correction functions are provided by a radiation transfer model of LOWTRAN 7 based on the actual atmospheric soundings over the Korean atmospheric complexity. The model produce the upward radiances of satellite spectral image for a given surface reflectance and aerosol optical thickness.

• ETRI Journal
• /
• 제38권1호
• /
• pp.1-8
• /
• 2016

A large incoherent crosstalk (IC) caused by amplified spontaneous emission (ASE) noise power from Tx-disabled optical network units and a differential path loss has been shown to degrade upstream transmission performance in time-division multiplexing passive optical networks. This paper considers the IC-induced power penalty of an upstream signal both in an XG-PON and in a TWDM-PON. We investigate the degradation of the extinction ratio and relative intensity noise through a simulation and experiments. For the XG-PON case, we observe a 9.6 dB difference in the level of ASE noise power from Tx-disabled ONUs (hereafter known simply as ASE noise) between our result and the ITU-T XG-PON PMD recommendation. We propose an optical filtering method to mitigate an IC-induced power penalty. In the TWDM-PON case, the IC-induced power penalty is naturally negligible because the ASE noise is filtered by a wavelength multiplexer at the optical line terminal. The results provide design guidelines for the level of ASE noise in both XG-PONs and TWDM-PONs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.375-378
• /
• 1995

Although laser interferometer measurement system has the advantage of range and accuracy, the traditional error measurement methods for geometric errors(two straightness and three angular errors) of a machine tool measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric error of a moving body, an on-line measurement system for simultaneous detection of the five error components of a moving axis is required. An on-line measurement system with 5 degrees of freedom was developed for geometric error detection. Performance verification of the system was performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a side of machine tool.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.138-142
• /
• 2007

Optical microscope was used to observe the difference of safranine penetration in Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi grown in Korea. It was found that Pinus koraiensis contained the highest number of ray parenchyma and ray tracheids. In longitudinal direction, latewood penetration was found higher than that of earlywood. The number of resin canals was found highest in Pinus koraiensis and lowest in Pinus rigida. The resin canal conducted safranine higher than longitudinal tracheids. In longitudinal direction, safranine diffused from longitudinal tracheid to ray parenchyma through the cross-field pits and from the longitudinal resin canal to ray parenchyma or longitudinal tracheid. Safranine diffused from longitudinal tracheid to its neighboring tracheid through bordered pit or ray parenchyma through the cross-field pits.

• 한국광학회지
• /
• 제11권4호
• /
• pp.246-249
• /
• 2000

고해상도 원격관측용 카메라오 설계된 비축 3반사 광학계의 제3거울인 타원면(원추계수>0) 형상측정 Null 렌즈를 설계하였다. Null 렌즈 설계방식으로는 측정감도는 2배로 높으면서 작은 기준 평면경을 사용하는 혼합방식을 제안하였다. 혼합방식과 autostigmatic 방식으로 설계한 Null 렌즈의 광파면 왜곡 민감도를 비교하여 혼합방식이 보다 유리한 Null 측정 광학게임을 제시하였다.

• 한국광학회지
• /
• 제10권5호
• /
• pp.369-372
• /
• 1999

마이켈슨 간섭계를 이용한 간섭계형 현미경을 구성하고 특성을 조사하였다. 본 마이켈슨 간섭계형 현미경은 시료 표면의 반사 신호와 거울의 반사 신호가 합쳐져서 일어난 간섭 신호를 이용해서 3차원 영상을 얻는다. He-Ne(λ=633 nm)레이저를 사용한 마이켈슨 간섭계는 반파장 (312.5 nm)의 경로차가 생길 때마다 같은 무늬가 반복해져 나타난다. 본 마이켈슨 간섭계형 현미경은 이러한 간섭 신호를 이용하기 때문에 white-light interferometer 수준의 수직 해상도를 얻을 수 있었다. 구성한 마이켈슨 간섭계형 현미경으로 얻은 영상을 공초점 현미경의 영상과 비교 분석하였다.