• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.186-193
• /
• 2008

[ $Moir{\acute{e}}$ ] interferometry is an optical method, providing whole field contour maps of in-plane displacements with high resolution. The demand for enhanced sensitivity in displacement measurements leads to the technique of microscopic $moir{\acute{e}}$ interferometry. The method is an extension of the $moir{\acute{e}}$ interferometry, and employs an optical microscope for the required spatial resolution. In this paper, the sensitivity of $moir{\acute{e}}$ interferometry is enhanced by an order of magnitude using an immersion interferometry and the optical/digital fringe multiplication(O/DFM) method. In fringe patterns, the contour interval represents the displacement of 52 nm per fringe order. In order to estimate the reliability and the applicability of the optical system implemented, the measurements of rigid body displacements of grating mold and the coefficient of thermal expansion(CTE) for an aluminium block are performed. The system developed is applied to the measurement of thermal deformation in a flip chip plastic ball grid array package.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.189-195
• /
• 2004

A 10 Gb/s limiting amplifier IC with the emitter area of $1.5{\times}10{\mu}m^2$ for optical transmission system was designed and fabricated with a AIGaAs/GaAs HBTs technology. In this stud)', we evaluated fine pitch bump using WL-CSP (Wafer Level-Chip Scale Packaging) instead of conventional wire bonding for interconnection. For this we developed WL-CSP process and formed fine pitch solder bump with the $40{\mu}m$ diameter and $100{\mu}m$ pitch on bonding pad. To study the effect of WL-CSP, electrical performance was measured and analyzed in wafer and package module using WL-CSP. In a package module, clear and wide eye diagram openings were observed and the riselfall times were about 100ps, and the output" oltage swing was limited to $600mV_{p-p}$ with input voltage ranging from 50 to 500m V. The Small signal gains in wafer and package module were 15.56dB and 14.99dB respectively. It was found that the difference of small signal gain in wafer and package module was less then 0.57dB up to 10GHz and the characteristics of return loss was improved by 5dB in package module. This is due to the short interconnection length by WL-CSP. So, WL-CSP process can be used for millimeter wave GaAs MMIC with the fine pitch pad.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1646-1655
• /
• 2004

A description of the basic principles of moire interferometry leads to the design of a eight-mirror four-beam interferometer for obtaining fringe patterns representing contour-maps of in-Plane displacements. The technique is implemented by the optical system using an environmental chamber for submicro-displacement mesurement. In order to estimate the reliability and applicabili쇼 of the system developed, the measurement of coefficient of thermal expansion (CTE) for a aluminium block is performed. Consequently, the system is applied to the measurement of thermal deformation of a WB-PBGA package assembly. Temperature dependent analyses of global and local deformations are presented to study the effect of the mismatch of CTE between materials composed of the package assemblies. Bending displacements of the packages and average strains of solder balls are documented. Thermal induced displacements calculated by FEM agree quantitatively with experimental results.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권2호
• /
• pp.137-148
• /
• 2010

This study deals with the accelerated life test of high power phosphor converted white Light Emitting Diodes (High power LEDs). Samples were aged at $110^{\circ}C$/85% RH and $130^{\circ}C$/85% RH up to 900 hours under non-biased condition. The stress induced a luminous flux decay on LEDs in all the conditions. Aged devices exhibited modification of package silicon color from white to yellowish brown. The instability of the package contributes to the overall degradation of optical lens and structural degradations such as generating bubbles. The degradation mechanisms of lumen decay and reduction of spectrum intensity were ascribed to hygro-mechanical stress which results in package instabilities.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2006년도 ISMP 2006
• /
• pp.67-73
• /
• 2006

A system in package (SiP) generally contains a variety of systems such as analog, digital, optical and micro-electro-mechanical systems, integrated in a system-level package connected through a substrate. However, there are many electrical and mechanical reliability issues including the reliability issue for embedded structures. A mismatch of thermal coefficients of expansion among packaging materials and devices can lead to warping or delamination in the package. In this study, the effect of material properties of underfill, such as Young's modulus and CTE, are investigated through FEM simulation. Experimental investigation on the warpage of the package is also carried out to verify the simulation results. The results show that the reliability of the system in package is closely related to the material properties of underfill. The results of this study provide a good guidance for the material selection when designing the system in package.

• 스마트미디어저널
• /
• 제11권9호
• /
• pp.21-29
• /
• 2022

센서 및 분석 경화시장에서 폭넓게 사용되고 있는 기존의 UV 광원들이 점차 LED로 교체 적용되고 있다. 그러나 UV LED의 광 성능이 기존 램프에 비하여 여전히 낮고 광 효율성도 낮아 효능성 감소 및 수명 저하 문제가 존재한다. 현재 환경과 UV램프의 기술적인 문제로 인하여 점차 LED교체가 이루어지고 있는 시점에서 UV LED의 성능 향상이 매우 중요하다. 본 연구에서는 UV LED의 수명 증가 및 성능 향상을 위한 new package 설계 및 분석을 실행하였다. 광소자에서 발생하는 열을 직접 방출하기 쉽도록 방열특성이 우수한 packaging 설계가 매우 중요한데, 본 연구에서는 열적 안전성을 기반으로 안정성이 우수한 패키지 구성 및 UV LED용 new packaging을 설계 구현하였다. 이를 통하여 광 효율 및 방열성능 향상을 위한 새로운 UV LED용 new packaging을 구성하고 전기적 광학적 특성을 각각 분석하였다. 또한 UV LED package의 방열성능 향상을 위해 높은 반사율 특성을 가지는 알루미늄(Al)를 이용, 최적의 렌즈 포커싱를 적용함으로서 광출력 효율을 증가 시킬 수 있었다. 기존 은(Ag)대비 광효율 결과가 약 ~30%이상 개선되었으며, 새로 적용된 광소자 패키지에서 광출력 저하 특성이 약 10% 이상 향상됨을 확인 할 수 있었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.111-114
• /
• 2001

Optical transmitter and receiver are the essential components for optical communication. For these components, butterfly type packages are used which are comprised of metal housing, multilayer ceramic inserts, lead and window. In this study, 2.5 Gbps DFB(Distributed -Feedback) LD(Laser Diode) package was fabricated and characterized. Metal housing showed good thermal conductivity (200W/mK) and well matched TCE(6.7ppm/K) with GaAs chip. Ceramic inserts also showed good VSWR(Voltage Standing Wave Ratio) characteristics(<2.0). By brazing technology, all the elements were combined and sealed. RF characteristics of the package mounted on the PWB was also tested.

• 대한치과기공학회지
• /
• 제36권1호
• /
• pp.17-23
• /
• 2014

Purpose: The purpose of this study was to analyze and compare the relative accuracy of digitized stone models of lower full arch, using two different scanning system. Methods: Replica stone models(N=20) were produced from lower arch acrylic model. Twenty digital models were made with the white light and blue LED($Medit^{(R)}$, Korea) scanner. Two-dimensional distance between the landmarks were measured on the Delcam $CopyCAD^{(R)}$(Delcam plc, UK). Independent samples t-test was applied for comparison of the groups. All statistical analyses were performed using the SPSS software package(Statistical Package for Social Sciences for Windows, version 12.0). Results: The absolute disagreement between measurements made directly on the two different scanner-based dental digital models was 0.02~0.04mm, and was not statistically significant(P>0.05). Conclusion: The precision of the blue LED optical scanner was comparable with the digitization device, and relative accuracy was similar. However, there still is room for improvement and further standardization of dental CAD technologies.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.448-454
• /
• 2015

In this paper, the band structural design that is typically in a line was arranged in a ring shape, so as to configure the high power LED lighting in such a way as to form a concentrated light distribution angle of less than 15 degrees. The parabolic aluminized reflector PAR38 that facilitates design using area and the area of the optical system to the same extent, applied a multiple light-source condenser lens optical system for the control of integration. The LED used here implemented a single linear light source using ans LED module with ans LED, flip-chip chip-scale package. The optical system was designed based on the energy star standard.

• 한국광학회지
• /
• 제18권4호
• /
• pp.235-240
• /
• 2007

본 논문에서는 10 Gbps급 데이터 전송을 위한 CPW(coplanar waveguide) 피드라인(feed-line)을 이용한 세라믹 스템(stem) 기반의 TO 패키지를 제안하였다. 기존의 금속 기반 TO 패키지에서 사용되는 실린더형 피드라인의 주파수 특성과 세라믹 패키지에서 사용되는 CPW 피드라인의 주파수 특성의 차이를 이론적으로 분석 비교하였다. 그리고 이들 패키지에 DFB 레이저다이오드(laser diode: LD)를 실장하여 측정된 3 dB 주파수 대역폭은 각각 3.5 GHz와 7.8 GHz로 사용된 패키지에 따라 큰 차이를 갖는 것을 밝혔다. 이러한 측정결과는 등가회로를 이용한 이론적인 계산결과와 잘 일치함도 확인하였다. 이상의 결과를 바탕으로 LD 광모듈의 주파수 특성을 개선하기 위한 방안으로 세라믹 재질의 비전도성 유전체를 스템으로 이용한 세라믹 스템 기반의 CPW 피드라인을 장착한 새로운 TO 패키지를 제안하였다. 제안된 패키지는 HFSS(high frequency structure simulator)를 이용하여 추출된 S 파라미터 값으로부터 기존의 금속 기반의 TO 패키지보다 월등히 넓은 주파수 특성을 얻을 수 있다는 것을 알 수 있었다.