• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.191-199
• /
• 1999

In designing the tracking system of an optical disc drive, it is first necessary to eliminate the undesired influence of any visible mechanical vibrations. In this paper a geometrical method to analyze the frequency response of an elastically supported planar rigid body has been presented. Using the theory of screw, a geometrical expression of a compliant transfer function which describes the effects of the locations of an applied force and observation on the response has been derived. Applying the substructure synthesis method, a technique to stabilize the tracking mechanical system has been presented with a numerical example.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1023-1030
• /
• 2023

FMCW LiDAR system with robust target detection capabilities even under adverse operating conditions such as snow, rain, and fog is addressed in this paper. Our focus is primarily on enhancing the performance of FMCW LiDAR by improving the characteristics of the frequency-modulated laser, which directly influence range resolution, coherence length, and maximum measurement range etc. of LiDAR. We describe the utilization of an unbalanced Mach-Zehnder laser interferometer to measure real-time changes of the lasing frequency and to correct frequency modulation errors through an optical phase-locked loop technique. To extend the coherence length of laser, we employ an extended-cavity laser diode as the laser source and implement a laser interferometer with an photonic integrated circuit for miniaturization of optical system. The developed FMCW LiDAR system exhibits a bandwidth of 10.045GHz and a remarkable distance resolution of 0.84mm.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.68-72
• /
• 1997

Using one of the absorption lines of $^{13}C_2H_2$ molecules near the zero dispersion wavelength(1549.49nm) of dispersion shifted fiber, we stabilized center frequency of an optical fiber Fabry-Perot filter. The free spectral range of the filter is 100 GHz for 100 GHz channel allocation. For equi-spaced three channel multiplexing, channel locking of three DFB-LDs to transmission peaks of the fiber Fabry-Perot filter was tried. To investigate the effect of dithering current applied to each DFB-LD, the change of DFB-LD linewidth was measured.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.379-384
• /
• 2000

We cooled cesium atoms below the Doppler cooling limit by laser cooling. For this deep cooling of atoms, the laser frequency was shifted by using the Zeeman shift of an absorption line of cesium. The stabilization of the laser frequency was maintained while the laser frequency was shifted by 40 MHz within 2 ms. The lowest temperature of the laser-cooled cesium atoms was $2.2\muK$\pm$0.5$\muK$in this experiment. We measured the temperature of the laser-cooled cesium atoms as a function of the frequency detuuing and the intensity of the cooling laser. The results agreed well with the ones calculated by two-photon laser cooling theory.theory.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.5
• /
• pp.19-30
• /
• 2016

In this study, realize voltage regulation $220Vac{\pm}10%$ or less, frequency fluctuation $60Hz{\pm}1%$ or less over the independent operation and grid-connected operation technologies for power stabilization relates to the ESS designed and manufactured in conjunction with solar installations and solar to compensate the output reduction due to the polarization of the solar module through the polarization prevention technology for preventing the optical module efficiency is lowered, in conjunction with the BMS inverter efficiency was more than 92%, more than 90% of the charging efficiency to the target. This study was designed in conjunction with the ESS solar power plants, grid-connected operation and independent operation, Peak-Cut, it can stabilize the grid via the Peak-Shifting operation

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.158-164
• /
• 2001

We observed a velocity-selective saturated absorption spectrum when the pump beam intersects the probe beam at a finite angle with a saturated absorption spectroscopic configuration in the cesium vapor cell. And we also observed a dispersion-like signal by measuring the difference between two velocity-selective absorption spectra produced by two parallel probe beams intersected by one pump beam. The dispersion-like signal was changed with the crossing angle and the crossing position of the pump and probe beams and compared with the calculated result. The dispersion-like signal was used as a frequency discriminator, and the laser could be frequency-stabilized without any frequency modulation. As a result, the square root of Allan variance was $\sigma_y(\tau=1s)=7$\times10^{-12}$, for the sampling time of 1 s.of 1 s.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.347-352
• /
• 2000

We have stabIhzed the laser frequency of a commercial dIode laser using a ULE (Ultra-low expansion material) reference cavIty and the cunent modulation charactenstics of the dIode itself The liuewIdth of the frce running laser was about a 1 MHz (rms) for a sampling time of 1 s and the drift rate was 300 kHz/s. Vvhen the laser is locked to oue sIde of the transmission signal from the ULE reference cavity, the lincwidth was reduced to 46 kHz (nus) for a sampling time longer than 10 ms. The root Allan variance was less than 2 kHz for a sampling time langeI than10 ms. 10 ms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1347-1353
• /
• 2015

We implemented a 10 Gb/s 4-channel vertical cavity surface emission lasers (VCSEL) driver array in a $0.13{\mu}m$ CMOS process technology. To enhance high current resolution, power dissipation, and chip space area, digital APC/AMC with time division sensing technology is primarily adopted. The measured -3 dB frequency bandwidth is 9.2 GHz; the small signal gain is 10.5 dB; the current resolution is 0.01 mA/step, suitable for the wavelength operation up to 10 Gb/s over a wide temperature range. The proposed APC and AMC demonstrate 5 to 20 mA of bias current control and 5 to 20 mA of modulation current control. The whole chip consumes 371 mW of low power under the maximum modulation and bias currents. The active chip size is $3.71{\times}1.3mm^2$.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2002

Using Mach-Zehnder type intensity modulator, we stabilized a 10 GHz harmonically mode-locked dispersion-compensated fiber ring laser using a feedback controlling system, and we measured its stability. The laser was stabilized for more than 16 hours by controlling the cavity length to suppress the relaxation oscillation frequency component which had caused the laser output instability. The ms timing jitter and ms amplitude noise were measured to be 260-524 fsec and 4~11.5%, respectively, and BER test measurement showed a value of 10$^{-13}$ .

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.403-407
• /
• 1998

The polarizatin properties of an internal-mirror 543 nm He-Ne laser with and without a transverse magnetic field were investigated for single-mode operation. Two orthogonal eigenpolarizations field to the natural tube axes of laser were observed when the emitted laser output was linearly polarized. Polarization unstability between these polarizations occurred when the applying a 500 gauss transverse magnetic field at 35$^{\circ}$ with respect to the natural tube axes of laser. Under such conditions stable single-mode operation which is useful for the frequency stabilization of a 543 He-Ne laser to $I_2$-saturated absorptions was obtained in the tuning range of 880 MHz.