• 한국광학회지
• /
• 제10권6호
• /
• pp.443-447
• /
• 1999

본 연구에서는 shaded spodizer가 광학 디스크 시스템의 재생신호에 미치는 영향을 조사하기 위하여 동의 중앙에서 가장자리로 갈수록 진폭이 단조 감소하는 shaded spodizer와 진폭이 단조 증가하는 shaded spodizer를 스칼라 회절 이론을 사용하여 고려하였다. 또한 bump 형태 변화에 따른 재생 신호의 변화를 조사하기 위하여, 원통형, 준원추형, 그리고 원추형 bump를 고려하였으며, 이때 bump의 높이는 $\lambda/4$로서, 위상 높이가 $\pi$가 되도록 하였다. 동의 중앙에서 가장 자리로 갈수록 진폭이 단조 감소하는 shaded spodizer의 경우에는 bump 반경이 증가함에 따라 재생 신호가 증가하여 극대값을 가진 후 감소하는 경향이 나타났으며, 진폭이 단조 증가하는 shaded spodizer의 경우에는 bump 반경이 작은 영역과 큰 영역에서 극대값을 갖는 특성을 나타냈다. 도한 구면수차를 0.5λ 포함하는 광학 디스크 시스템의 경우 진폭이 단조 감소하는 shaded spodizer의 최대 재생 신호가 spodizer를 사용하지 않은 경우의 최대 재생 신호보다 크게 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.813-819
• /
• 2006

The state of the art for the design of swing ann actuators for optical disc drives is to obtain the high efficient dynamic characteristics, especially for the small size for the mobile information devices, It is affected by the need of consumers who wants the portable digital storage devices maintaining highly functional and removable characteristics of the optical disk drive (ODD). As a necessary consequence, the need of the small form factor (SFF) storage device has been considered as an important part in the information storage technology. In this paper. we suggest a new conceptual miniaturized swing arm type actuator that has high efficient dynamic characteristics as well as satisfies the sensitivity and the heat emission requirements for the SFF-ODD. It also uses a tracking electromagnetic (EM) circuit for a focusing motion. Due to the size constraint, the thermal problem of optical head arises; therefore, we design an efficiently heat emitted structure for the actuator.

• 소성∙가공
• /
• 제19권5호
• /
• pp.296-304
• /
• 2010

It is still needed to study the effect of process conditions on the final properties of injection-molded parts for producing precision optical products. Especially, the optical anisotropy, i.e., birefringence, is a significant factor to affect the function of many optical components. In the present study we have focused on the effect of holding and compression processes on the birefringence remaining in the transparent disc by examining the gap-wise distribution of birefringence and extinction angle. As a result, two extra birefringence and extinction peaks near the center in thickness direction showed the effect of holding pressure, which came from the flow in packing stage. However, more uniform birefringence distribution than injection-only cases could be found in injection/compression cases. Depends on the process condition even the flow reversal could be found from the distribution of extinction angle. Finally, graphical representation of optical indicatrix was added for better understanding the final structure of injection-only and injection/compression cases.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.217-221
• /
• 2005

Nowadays, HD(High Definition) broadcasting is popular all over the world. Many people want to record the HD level contents. BD(Blu-ray Disc) is developed to satisfy the needs. BD player for home movie system was manufactured already. ODD maker will produce BD Drive for PC(Personal Computer) within few months. Backward Compatibility is very important point in BD Drive. Until now, two OL(Object Lens), two optical pickup and two deck system are proposed. We suggest Single OL system in this paper. Single OL is composed of two optical parts and it's weight is heavy. We introduce the magnetic circuit composed of two 3-Pole magnets. In Spite of heavy OL, We achieve the New Actuator which has high performance.

• 한국광학회지
• /
• 제8권1호
• /
• pp.73-79
• /
• 1997

랜드/그루브 기록 광디스크에서 랜드와 그루브의 영향, 각종 수차 그리고 수광계의 변화가 포커스에러신호에 미치는 영향을 나이프엣지법과 비점수차법으로 구분하여 시뮬레이션을 통해 분석하였다. 그루브의 영향에 의해 포커스에러신호에서 Aero Cross 점이 Shift되는데, 이는 디스크 반사 회절빔의 파면이 Defocus 성분을 포함하고 있기 때문이라는 것을 밝혔다. 또한 회절빔의 각 차수별로 포커스에러신호를 분석함으로써 빔점수차 방식에서 랜드와 그루브의 영향으로 에러신호의 감도가 감소함을 보았다.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.643-648
• /
• 2015

By comparing the results calculated by atan() and atan2() functions, the correctly estimated region of isoclinic phase map is determined using morphological techniques. The isoclinic phase map is automatically unwrapped in the true phase range -π/2 to π/2. Demonstrations of the method on a disc and a ring under diametral compression are performed. Test results compare well with the theoretical results. Furthermore, the influences of principal stress direction and the range of isoclinic phase upon stress separation are discussed.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.362-369
• /
• 2000

Via screw theory, a vibration mode can be geometrically interpreted as a pure rotation about the vibration center in a plane and as a twisting motion on a screw in a three dimensional space. In thi s paper, applying the conditions that can be used to diagonalize the stiffness matrix by a parallel axis congruence transformation, the vibration modes and frequency response of an elastically suspended optical disc drive have been analyzed. It is first shown that the system has one plane of symmetry, which enables one to decouple the complicated vibration modes into two sets of modes independent of each other. Having obtained the analytical solutions for the axes of vibrations, the frequency response for a given applied input force has been demonstrated. Most importantly, it has been explained that this research result could be used in the synthesis process of a linear vibration system in order to improve the frequency response.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.100-104
• /
• 2006

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result. the stamper surface temperature was controlled according to the desired reference stamper surface temperature.

• 한방안이비인후피부과학회지
• /
• 제27권2호
• /
• pp.83-88
• /
• 2014

Objectives : Vogt-Koyanagi-Harada(VKH) syndrome is a multisystem autoimmune disease characterized by its affects on pigmented tissues in the ocular, auditory, integumentary and central nervous system. This case is to report a decreased optical disc swelling in VKH patient treated only with herbal medication. Methods : A 56-year-old male patient with VKH experienced headache and numbness during 7 months of steroid treatment. He visited our clinic and was administered Haeulsoyo-san (解鬱逍遙散) three times a day for a month. No other oriental or western treatments were included. Result & Conclusions : Patient didn't complain any discomfort during the treatment. Significantly decreased optical disc swelling was confirmed by taking fundus photo. This is the first case of KVH to be reported in Korean medicine society.