• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.1
• /
• pp.94-100
• /
• 1988

To improve the switching time of active optical bistable devices, we propose an active optical bistable device that consists of a diode laser, a transistor, and a photodetector. By implementing the proposed device we realize the optical bistable device with a 5 nanosecond switching time. This is the fastest switching time among the hybrid type optical bistable devices. It is also experimentally demonstrated that the proposed device may be used in an optical disc pick up.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1239-1242
• /
• 2006

Scintillation that is grainy patterns appeared on a screen has been one of a biggest issues in a rear projection TVs. In this paper, with focusing on the average size of random particle, it was proved that the particle size of calculated speckle and the one of measured scintillation are almost the equal. This result shows speckle phenomenon is an important factor of scintillation.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.259-269
• /
• 2002

Polymers are emerging as new alternative materials for optical communication devices. We developed two types of polymer-based devices for optical communications. One type is for ultra high-speed signal processing that uses nonlinear optical (NLO) polymers in such devices as electro-optic (EO) Mach-Z${\ddot{e}} $ hnder (MZ) modulators and EO 2${\times}$2 switches. The other is for WDM optical communications that use low-loss optical polymers in such devices as 1${\times}$2, 2${\times}$2, 4-arrayed 2${\times}$2 digital optical switches (DOSs) and 16${\times}$16 arrayed waveguide grating (AWG) routers. For these devices, we synthesized a polyetherimide-disperse red 1 (PEI-DR1) side chain NLO polymer and a low-loss optical polymer known as fluorinated polyaryleneethers (FPAE). This paper presents the details of our development of these polymeric photonic devices considering all aspects from materials to packaging.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1376-1381
• /
• 2012

Optical devices are used extensively in the field of information network. Increasing demand for optical device, optical interconnection has been a important issue for commercialization. However many problems exist in the interconnection between optical device and optical fiber, and in the case of the multi-channel, problems of the optical alignment and optical array arise. For solving the alignment and array problem of optical device and the optical fiber, we fabricated fiber alignment and array by using imprint technology. Achieved higher precision of optical fiber alignment and array due to fabricating using imprint technology. The silicon stamp with different depth was fabricated using the conventional photolithography. Using the silicon stamp, a nickel stamp was fabricated by electroforming process. We conducted imprint process using the nickel stamp with different depth. The optical alignment and array by fabricating the patterns of optical device and fiber alignment and array using imprint process, and achieved higher precision of decreasing the dimensional error of the patterns by optimization of process. The fabricated optical interconnection of PLC device was measured 3.9 dB and 4.2 dB, lower than criteria specified by international standard.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.445-450
• /
• 2001

DVD(Digital Versatile Disk) is the data storage media devised to make high storage density and high data input/output possible. Therefore higher rotational speed and better accuracy in optical pick-up are required compared with the existing optical storage device. These operational functional requirements are concerned with abilities of optical storage device. Especially, High rotational speed is deeply concerned with the noise and vibration of optical storage device, is important problem in development of optical storage device so much. This paper propose a new concept ROM media of optical storage device named as Cylindrical ROM media, and evaluate this by means of Axiomatic approach and empirical data.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.576-581
• /
• 2005

We fabricated red organic light emitting diodes(OLEDs) utilizing tis(8-hydroxyquinoline) aluminum $(Alq_3)$ doped with $5\%$ of (4-(dicyanomethylene)-2-i-propyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran) (DCJTI) and investigated the driving and modulation characteristics for applying to the electro-optical conversion device. To improve the driving characteristics of red OLEDs, 3 V of offset voltage, which is equal to the turn on voltage, Is applied to the device. Offset voltage enhanced the optical EL output and reduced the rise time of EL waveforms of red OLEDs, and hence the cutoff frequency is increased with increasing applied voltage. The optical pulse of 100 MHz has been obtained from red OLEDs. Therefore, we confirmed that the red OLEDs can be applied to the fields of optical communication as an electro-optical conversion device.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.279-282
• /
• 2020

In this study, body pressure was quantitatively detected using built-in optical sensors, inside an air cushion seat. The proposed system visualizes the effect of the body pressure distribution on the air cushion seat. The built-in sensor is based on the time-of-flight (ToF) optical method, instead of the conventional electrical sensor. A ToF optical sensors is attached to the bottom surface of the air-filled cells in the air cushion. Therefore, ToF sensors are durable, as they do not come in physical contact with the body even after repeated use. A ToF sensor indirectly expresses the body pressure by measuring the change in the height of the air-filled cell, after being subjected to the weight of the body. An array of such sensors can measure the body pressure distribution when the user sits on the air cushion seat. We implemented a prototype of the air cushion seat equipped with 7 ToF optical sensors and investigated its characteristics. In this experiment, the ToF optical pressure sensor successfully identified the pressure distribution corresponding to a sitting position. The data were accessed through a mobile device.

• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.230-233
• /
• 2011

In this paper, highly-efficient optical gating in a junction device based on vanadium dioxide($VO_2$) thin film grown by a sol-gel method was investigated as a gate terminal of a three-terminal device using infrared light with a wavelength of ~1554.6 nm. Due to the photoinduced phase transition, the threshold voltage of the $VO_2$ junction device, at which the device current abruptly jumps, could be tuned with a sensitivity of ~96.5 V/W by adjusting the optical power of the infrared light directly illuminating the device. Compared with the tuning efficiency of the previous device fabricated using $VO_2$ thin film deposited by a pulsed laser deposition method, the threshold voltage of this device could be tuned by ~76.8 % at an illumination power of ~39.8 mW resulting in a tuning efficiency of ~1.930 %/mW, which is ~4.9 times larger than the previous device.

• Journal of the Optical Society of Korea
• /
• v.7 no.1
• /
• pp.28-33
• /
• 2003

We describe the optimal design and the fabrication of a 2$\times$2 port optical device based on the thin film filter (TFF), and also propose a 4-channel OADM module using these devices. The optical performance of the proposed OADM module is evaluated theoretically and experimentally, and is compared to that of typical OADM modules using 1$\times$2 port optical devices for 4, 8, 16 and 32 drop channels in optical transmission systems. Since the 2$\times$2 port optical device accomplishes the function of wavelength multiplexing and demultiplexing simultaneously in the proposed OADM module, the insertion loss of through channels can be improved by 1.2 dB compare to that of typical OADM modules using 1$\times$2 port optical devices. In addition, both the size and the price of the module can be reduced to 40~50%.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.306-311
• /
• 2003

In this paper, we modeled the incident beam in order to analyze and evaluate the optical thin film device for wavelength division multiplexing in optical telecommunication network. As applied ray tracing method to the optical path, we were compared the accuracy of coupling efficiency simulated by two modeling methods. In the results of sinulation, ceil modeling method was preferred to annual modeling method in micro-optic device because of accuracy for coupling efficiency and Gaussian intensity distribution. In the results of optimal simulation for optical device using thin film filter, the distance (d1) between optical fiber and GRIN lens, the distance (d2) between GRIN lens and thin film filter and the coupling efficiency were 0.24 mm, 0.25 mm and -0.11 ㏈ respectively. As d2 was displaced at 0.25 mm and d1 was varied in order to evaluate the optimal value, d1 and maximum coupling efficiency were 0.24 mm and -0.35㏈, respectively. Then the results of experiment were corresponded to that of optimal simulation by cell modeling and it was possible to analyze the performance for optical device using thin film filter by the simulation.