• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.156-159
• /
• 2003

Permanent structure of photoinduced singlemode waveguide in optical fluoride glasses was demonstrated using the self-channeled plasma filament excited by a femtosecond (110 fs) Ti:sapphire laser ($λ_p$ = 800 nm). The photoinduced refractive index modification in ZBLAN glasses reached a length of approximately 10 - 15 mm from the input surface of the optical glass with the diameters ranging from 5 to 8 ${\mu}{\textrm}{m}$ at input intensities more than l.0 ${\times}$ $10^{12}$ W/$\textrm{cm}^2$. The graded refractive index profiles were fabricated to be a symmetric form from the center of an optical fluoride glass and a maximum value of refractive index change (ㅿn) was measured to be l.3${\times}$$10^{-2}$. The beam profile of the output beam transmitted through the modified region showed that the photoinduced refractive index modification produced a permanent structure of singlemode waveguide.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.15-22
• /
• 2022

This paper describes the construction of a phase shifter with low loss and small volume. To construct it, we use the two graphene layers that are separated by a hexagonal boron nitride (hBN) and embedded in a silicon waveguide. The refractive index of the waveguide is adjusted by applying a bias voltage to the graphene sheet to create an optical phase shift. This waveguide is a compact device that only has a radius of 5 ㎛. It has a phase shift of 6π. In addition, the extinction ratio (ER) is 11.6 dB and the insertion loss (IL) is 0.031 dB. Due to its unique characteristics, this device has great potential in silicon on-chip optical interconnection and all-optical multiple-input multiple-output processing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.275-277
• /
• 1999

A application possibility of photoresist flexible film for optical waveguide is proposed and described. The optical waveguide dimensions that is consists of Mach-zehnder interferometric and single channel waveguide based on the single-mode conditions in LiNbO$_3$ device was utilized and fabricated by wet etching technique. This Polymer material for core layer is SU-8/5O(Microchem.) and its refractive index from prism couping method was measured about 1.59 thickness about 10${\mu}{\textrm}{m}$ at wavelength 0.6328${\mu}{\textrm}{m}$. From the results, this work can show the possibility of fabricating a flexible optical waveguide in the field of integrated optics.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.121-129
• /
• 2001

This paper demonstrates the development of optical temperature sensor based on the etched planar waveguide Bragg grating. Topics include design and fabrication of the etched planar waveguide Bragg grating, investigation of the grating reflection characteristics, and temperature measurement capabilities. The typical bandwidth and reflectivity of the surface etched grating has been ~0.2nm and ~7%, respectively, at a wavelength of ～1552nm. The temperature-induced wavelength change of the optical sensor is found to be slightly non-linear over ～20$0^{\circ}C$ temperature range. Theoretical models for the grating response of the sensor based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.151-156
• /
• 2021

Leakage and Bragg condition of optical waveguide with asymmetric rectangular grating profile are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. The optical waveguide composed by asymmetric rectangular grating occur leaky-wave stop-bands at Bragg conditions, and anomalies based on Rayleigh-Wood condition near Bragg conditions. Furthermore, DFB properties of the guiding structure at Bragg conditions are analyzed by applying longitudinal equivalent transmission-line with characteristic impedance of periodic grating. The numerical results show that filtering characteristics that maximize the reflected power of DFB waveguide are activated near Bragg conditions, in which leaky-wave stop-bands occur.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.139-147
• /
• 2021

Numerical analysis was performed using FIMMWAVE to optimize the specifications of Si₃N₄/SiO₂ slot and ridge-slot optical waveguides based on confinement factor and effective mode area. The optimized specifications were confirmed based on sensitivity in terms of the refractive index of the analyte. The specifications of the slot optical waveguide, i.e., the width of the slot and the width and height of the rails, were optimized to 0.2 ㎛, 0.46 ㎛, and 0.5 ㎛ respectively. When the wavelength was 1.55 ㎛ and the refractive index of the slot was 1.3, the confinement factor and effective mode area of 0.2024 and 2.04 ㎛², respectively, were obtained based on the optimized specifications. The thickness of the ridge and the refractive index of the slot were set to 0.04 ㎛ and 1.1, respectively, to optimize the ridge-slot optical waveguide, and the confinement factor and effective mode area were calculated as 0.1393 and 2.90 ㎛², respectively. When the confinement coefficient and detection degree of the two structures were compared in the range of 1 to 1.3 of the analyte index, it was observed that the confinement coefficient and sensitivity were higher in the ridge-slot optical waveguide in the region with a refractive index less than 1.133, but the reverse situation occurred in the other region. Therefore, in the implementation of the integrated optical biochemical sensor, it is possible to propose a selection criterion for the two parameters depending on the value of the refractive index of the analyte.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.175-183
• /
• 2024

Research into optical signal processing using photonic integrated circuits (PICs) has been actively pursued in various fields, including optical communication, optical sensors, and quantum optics. Among the materials used in PIC fabrication, polymers have attracted significant interest due to their unique characteristics. To fabricate polymer-based PICs, establishing an accurate manufacturing process for the cross-sectional structure of an optical waveguide is crucial. For stable device performance and high yield in mass production, a process with high reproducibility and a wide tolerance for variation is necessary. This study proposes an efficient method for fabricating polymer optical-waveguide devices by introducing the atomic layer deposition (ALD) process. Compared to conventional photoresist or metal-film deposition methods, the ALD process enables more precise fabrication of the optical waveguide's core structure. Polyimide optical waveguides with a core size of 1.8 × 1.6 ㎛² are fabricated using the ALD process, and their propagation losses are measured. Additionally, a multimode interference (MMI) optical-waveguide power-splitter device is fabricated and characterized. Throughout the fabrication, no cracking issues are observed in the etching-mask layer, the vertical profiles of the waveguide patterns are excellent, and the propagation loss is below 1.5 dB/cm. These results confirm that the ALD process is a suitable method for the mass production of high-quality polymer photonic devices.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.788-792
• /
• 2014

It has been a critical issue to reduce the size of spectrometers in many fields such as on-chip chemical and biological sensing. The proposed plasmonic channel-waveguide with a sub-micrometer width has a cutoff frequency which enables us to control wavelength dependent propagation properties. We focused on the capability of the waveguide for spectral-to-spatial mapping when the waveguide width changes gradually. In this paper, we propose a plasmonic tapered channel-waveguide structure as a compact spectrometer with a physical size of $0.24{\times}2.0{\times}0.20{\mu}m^3$. The scattering point just above the tapered waveguide moves linearly depending on the wavelength of the injecting light. The spectral-to-spatial mapping can be improved by increasing the tapered length.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.484-490
• /
• 2005

We fabricated 40 Gb/s front-end optical receivers using spot-size converter integrated waveguide photodiodes (SSC-WGPDs). The fabricated SSC-WGPD chips showed a high responsivity of approximately 0.8 A/W and a 3 dB bandwidth of approximately 40 GHz. A selective wet-etching method was first adopted to realize the required width and depth of a tapered waveguide. Two types of electrical pre-amplifier chips were used in our study. One has higher gain and the other has a broader bandwidth. The 3 dB bandwidths of the higher gain and broader bandwidth modules were about 32 and 42 GHz, respectively. Clear 40 Gb/s non-return-to-zero (NRZ) eye diagrams showed good system applicability of these modules.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.16-19
• /
• 1997

We have investigated the optical properties of a Ti:LiNbO$_3$ optical waveguide which was fabricated by Ti-diffusion in a alto atmosphere, and propose an effective method of polishing waveguide. This method was regarded to be applicable to waveguide fabrications.