• 제목/요약/키워드: Optical Transparency

검색결과 312건 처리시간 0.029초

DC/RF 마그네트론 스퍼터링으로 제작한 Al:ZnO 투명전도성 산화막의 광학적 특성 (Optical properties of the Al:ZnO transparent conducting oxide films prepared by DC/RF)

  • 이붕주;신백균;남광우;송진호;김용혁;김용운
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1254-1255
    • /
    • 2008
  • Low cost TCO(Transparent Conductive oxide) thin films were prepared by 6" DC/RF magnetron sputtering systems. For the AZO preparation processes a 99.99% AZO target (Zn: 98 wt.%, $Al_2O_3$: 2 wt.%) was used. In order to verify the optical properties of the AZO thin films, the transparency was tested with sputtering conditions using UV-visible spectroscopy. As a result, we got the transmittance properties over 80% and low resistivity in the sputtering conditions of DC 200[W], Ar 30 [sccm], 1 [mtorr], 20 [min].

  • PDF

Spatial Information Transfer with a Stationary Coupling Wave in Rb Atoms

  • Bae, In-Ho;Moon, Han-Seb
    • Journal of the Optical Society of Korea
    • /
    • 제12권3호
    • /
    • pp.192-195
    • /
    • 2008
  • We report on the spatial information of a coupling laser transfer into a reflected probe laser; the transfer is achieved by means of electromagnetically induced transparency through a common excited state connected with $5S_{1/2}-5P_{1/2}(F=1{\rightarrow}F'=2)$ in the $^{87}Rb\;D_1$ line. When the coupling laser was spatially modulated as a stationary wave, the absorption of the probe laser was enhanced and the reflection of the probe laser was generated. When the coupling laser was spatially modulated by a mask, we observed that the reflection light of the probe laser was modulated as the shape of the mask. The Bragg reflection transferred the spatial information of the coupling laser. The reflection was approximately 7% of the incident power of the probe laser.

Sputtering 방법에 의해 제조된 Sb가 도핑된 주석산화물 박막의 특성에 관한 연구 (Study on Properties of Antimony-doped Tin Oxide Thin Films Prepared by Sputtering)

  • 김층완;김광호;이환수;이혜용
    • 한국세라믹학회지
    • /
    • 제33권7호
    • /
    • pp.735-742
    • /
    • 1996
  • Antimony-doped Tin oxide (ATO) thin films were deposited on soda-lime glass substrates by DC magnetron sputtering technique. Effects of DC power film thickness and post heat-treatment on electrical conductivity of ATO film were investigated. Other properties of ATO film such as optical anti-chemical and wear properties were also reported in this work. The obtained ATO films showed electrical resistivities ranging from 5$\times$10-3 $\Omega$cm to 3$\times$10-3 $\Omega$cm with the average optical transparency above 80% in visible wavelength range and excel-lent anti-chemical properties where the electrical resistivity was not changed even after soaking the films in 1M HCl or 1M NaOH solution for 10 days. These properties were found to be related to the crystallinity of ATO film and the films having higher crystallinity showed better properties.

  • PDF

로이 응용을 위한 비정질 In-Si-O 다층구조 특성 평가 (Characterization of Amorphous In-Si-O Multilayer for Low Emissivity Applications)

  • 이영선;이상렬
    • 한국전기전자재료학회논문지
    • /
    • 제27권8호
    • /
    • pp.483-485
    • /
    • 2014
  • Transparent amorphous In-Si-O (ISO)/Ag/In-Si-O (ISO) has been reported for low emissivity (low-e) applications. Effective Si doping into the $In_2O_3$ matrix led to a completely amorphous ISO film as well as a low resistivity and a high optical transmittance. The optical and electrical performances were examined by measuring transmittance with a UV-VIS spectrophotometer and resistivity with a Hall effect measurement. Consequently, low-e glass with ISO/Ag/ISO showed a high transparency in the visible region and low emissivity in the infrared region, indicating that ISO is a promising amorphous transparent electrode for low-e glass.

Hybrid Transparent Conductor by using Solution-Processed AgNWs for High-Performing Si Photodetectors

  • Kim, Hong-Sik;Kim, Joondong
    • Current Photovoltaic Research
    • /
    • 제3권4호
    • /
    • pp.116-120
    • /
    • 2015
  • A hybrid transparent conducting layer was applied for Si photodetector. To realize the hybrid transparent conducting layer, a 200 nm-thick ITO layer was deposited onto a Si substrate, following by a solution-processed AgNWs-coating on the ITO. The hybrid transparent conducting layer showed an excellent low electric resistance of $15.9{\Box}/{\Omega}$ with a high optical transparency of 86.89%. Due to these optical and electrical benefits, the hybrid transparent conductor-embedding Si diode provides an extremely high rectifying ratio of 3386. Under light-illumination, the hybrid transparent conductor device provides extremely high photoresponses for broad wavelengths. This implies that a functional design for hybrid transparent conductor is crucial for photoelectric devices and applications.

Effects of Vertical Alignment of LCs on Rubbed Polymer Surfaces using Low Resistive Transparent Electrodes

  • Han, Jin-Woo;Kim, Young-Hwan;Kim, Byoung-Yong;Han, Jeong-Min;Moon, Hyun-Chan;Park, Kwang-Bum;Seo, Dae-Shik
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.396-396
    • /
    • 2007
  • We investigated the liquid crystal (LC) aligning capabilities and electrooptical characteristics of semi-transparent silver paste electrodes substituting indium tin oxide (ITO) electrodes. Experimental results show that a uniform vertical LC alignment and a large pretilt angle were achieved using the semi-transparent silver paste. The vertical alignment mode based on the semi-transparent silver paste electrodes showed appropriate electro-optical characteristics and a high transparency in comparison with that based on the ITO electrodes. These results indicate that the semi-transparent silver paste electrodes of liquid crystal displays could substitute the ITO electrodes.

  • PDF

가교 가능한 단량체를 이용한 무색투명 폴리이미드 필름 제조와 다양한 열처리에 따른 성질 (Fabrications and Properties of Colorless Polyimide Films Depending on Various Heat Treatment Conditions via Crosslinkable Monomer)

  • 최일환;장진해
    • 폴리머
    • /
    • 제34권5호
    • /
    • pp.391-397
    • /
    • 2010
  • 폴리아믹산(PAA)은 가교가 가능한 2중 결합을 갖는 bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxy-licdianhydride(BTDA)와 bis[4-(3-aminophenoxy)phenyl] sulfone(BAPS)을 N,N-dimethylacetamide(DMAc) 용매에서 반응하여 얻어졌으며, 폴리이미드(PI) 필름은 PAA를 캐스팅하여 각각 다른 반응 온도에서 열처리를 통해 얻었다. 가교 온도를 $250{\sim}350^{\circ}C$까지 증가하여 얻은 가교된 PI의 열적-기계적 성질, 가교도, 광학적 특성을 열처리 온도에 따라 조사하였다. 열적-기계적 성질은 $350^{\circ}C$에서 열처리되었을 때 최대 값을 나타냈으며, 광학적 특성은 $250^{\circ}C$에서 열처리된 필름이 가장 우수한 광학특성을 보였다. $250{\sim}350^{\circ}C$까지 열처리에 따른 가교도는 NMR 상에서 85~93%를 나타냈다.

Fluoride single crystals for UV/VUV nonlinear optical applications

  • Shimamura Kiyoshi;Villora Encarnacion G.;Muramatsu Kenichi;Kitamura Kenji;Ichinose Noboru
    • 한국결정성장학회지
    • /
    • 제16권4호
    • /
    • pp.133-140
    • /
    • 2006
  • The growth characteristics and properties of large size $SrAlF_5$ single crystals are described and compared with those of $BaMgF_4$. Transmission spectra in the vacuum ultraviolet wavelength region indicate a high transparency of $SrAlF_5$ (about 90% without considering surface reflection loses) down to 150 nm, on contrast to the optical loses observed for $BaMgF_4$. The ferroelectric character of $SrAlF_5$ is evidenced by the reversal of the spontaneous polarization in a hysteresis loop. The higher potential of $SrAlF_5$ in comparison with $BaMgF_4$ for the realization of all-solid-state lasers in the ultraviolet wavelength region by the quasi-phase matching (QPM) technique is pointed out. $SrAlF_5$, besides a higher grade of transparency, shows a nonlinear effective coefficient similar to that of quartz and uniaxial nature, on contrast to the one order smaller nonlinear coefficient and biaxial character of $BaMgF_4$. The refractive index of $SrAlF_5$ from the ultraviolet to the near-infrared wavelength region is measured by the minimum deviation method. The Sellmeier and Cauchy coefficients are obtained from the fits to the curves of the ordinary and extraordinary refractive indices, and the grating period for the first order QPM is estimated as a function of the wavelength. The poling periodicity for 193 nm SHG from 386 nm is $4{\mu}m$.

결합광 세기에 따른 Rb 원자의 사다리형 전자기 유도 투과 (Coupling Intensity Effects in Ladder-type Electromagnetically Induced Transparency of Rb atoms)

  • 문한섭;이림;김중복
    • 한국광학회지
    • /
    • 제16권1호
    • /
    • pp.1-6
    • /
    • 2005
  • 우리는 Rb원자의 5S$_{1}$2-/5P$_{3}$2-/5D$_{5}$2/ 전이선에서 조사광과 곁합광의 편광조합 그리고 결합광 세기에 따른 사다리형 전자기 유도 투과(EIT) 현상을 조사하였다. 우리는 5D$_{5}$2/ 전이선에서 초미세구조를 가진 사다리형 EIT 스펙트럼을 얻었고, EIT 스펙트럼의 최소 선폭은 6.5 MHz로 측정되었다. 우리는 EIT 초미세구조의 상대적인 크기가 레이저의 편광조합 뿐만 아니라 결합광의 세기에 따라서 변하는 것을 실험적으로 관측하였고, 결합광의 세기에 따라 신호의 크기가 달라지는 이유는 광의 세기에 대하여 원자계가 비선형적으로 상호작용하기 때문이라는 사식을 밝혔다.

기능화된 탄소나노튜브를 이용한 초고분자량 폴리에틸렌 복합체 필름: 열적 기계적 성질, 모폴로지, 전기적 성질 및 기체 투과도 (Ultrahigh Molecular Weight Polyethylene Hybrid Films with Functionalized-MWNT: Thermomechanical Properties, Morphology, Gas Permeability, and Optical Transparency)

  • 고정호;김정철;장진해
    • 폴리머
    • /
    • 제33권2호
    • /
    • pp.97-103
    • /
    • 2009
  • 기능화 탄소나노튜브인 4-cumylphenol-MWNT(CP-MWNT)를 이용하여 초고분자량 폴리에틸렌(ultra high molecular weight polyethylene (UHMWPE))/CP-MWNT 복합체 필름을 용액 삽입법을 이용하여 제조하였다. 0에서 2.00 wt%까지의 서로 다른 CP-MWNT의 농도에 따라 만들어진 복합체 필름의 열적, 기계적, 기체 투과도 및 광학 투명성 등의 변화를 시차주사열량계, 열중량분석기, 전계 방사형 주사전자현미경과 인장시험기를 사용하여 측정하였다 복합체 필름은 기능화된 탄소나노튜브를 소량 첨가하여도 열역학적 특성이 향상되는 것을 확인할 수 있으며 0.50에서 1.00 wt%의 농도에서 최대값을 가진다. CP-MWNT의 농도가 1.00 wt%일 때 필름의 산소 기체 차단성은 최대 향상을 나타내었다. 전체적으로는 CP-MWNT가 첨가된 복합체 필름의 열적-기계적 성질 및 기체 투과도 등은 순수한 UHMWPE보다 더 향상되었다.