• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.12
• /
• pp.2315-2325
• /
• 2011

We propose a novel reduced-state maximum-likelihood sequence detection (MLSD) structure using the Viterbi algorithm based on the second-order Volterra kernel modeling nonlinear distortion due to square law detection of multipath channels commonly occurring in chromatic dispersion (CD) or polarization mode dispersion (PMD) in optical communication systems. While all existing MLSD methods for square-law detection receivers are based on direct computation of branch metrics, the proposed algorithm provides an efficient and structured way to implement reduced-state MLSD with almost the same complexity of a MLSD for linear channels. As a result, the proposed algorithm reduces the number of parameters to be estimated and the complexity of computation.

• Journal of information and communication convergence engineering
• /
• v.19 no.4
• /
• pp.269-275
• /
• 2021

Light-emitting diodes (LEDs) are modulated using a square wave pulse sequence for flicker prevention and dimming control in visible light communication (VLC). In a VLC transmitter, the high and low bits of the non-return-to-zero (NRZ) data are converted to two square waves of different frequencies, which continue for a finite time defined by the fill ratio in an NRZ bit time. As the average optical power was kept constant and independent of data transmission, the LED was flicker-free. Dimming control is carried out by changing the fill ratio of the square wave in the NRZ bit time. In the experiments, the illumination of the LED light was controlled in the range of approximately 19.2% to 96.2% of the continuous square wave modulated LED light. In the VLC receiver, a high-pass filter combined with a latch circuit was used to recover the transmitted signal while preventing noise interference from adjacent lighting lamps.

• Journal of Acupuncture Research
• /
• v.18 no.4
• /
• pp.116-124
• /
• 2001

Background and Objetive : The aim of this study was to investigate the effect of various electroacupuncture stimulation on NADPH-diaphorase in cerebral cortex, brain stem, cerebellum of spontaneously hypertensive rats. Materials and Methods : We evaluated the changes of NADPH-d-positive neurons using a histochemical method. The staining intensity of NADPH-d-positive neurons was assessed in a quantitative fashion using a microdensitometrical method based on optical density by means of an image analyzer. Results and Conculsion : The average optical density of NADPH-d-positive neurons of 100 Hz (bipolar square wave 0.2 ms duration and 100 Hz frequency) electroacupuncture treatment group significantly increased in most cortical areas comparison between the manual acupuncture and 2 Hz (bipolar square wave 0.2 ms duration and 2 Hz frequency) electroacupuncture groups. In the brain stem, the optical density of NADPH-d-positive neuron at only superficial gray layer of the superior colliculus area was same as cerebral cortex. We conclude that the morphological evidence for NADPH-d-positive neurons may be have regional change in cerebral cortex brain stem and cerebellum according to various electroacupuncture stimulations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.5
• /
• pp.543-552
• /
• 2003

The effects of a directionally emitting and reflecting dielectric surface on the wall heat flux and medium temperature distribution are studied. The system is an infinite square duct enclosing an absorbing and emitting medium. The emissivity and reflectivity of opaque and gray wall vary with direction. Combined effect of conductive and radiative heat transfer is analyzed using finite difference and the direct discrete-ordinates method. The parameters under study are conduction to radiation parameter, optical depth, refractive index ratio. The results with directional and diffuse properties deviate each other when the conduction to radiation parameter is less than around 0.01. The wall heat flux differs fur optical thickness less than around 0.1. However, the medium temperature profiles differ for optical thickness greater than around 1. Deviations from diffuse property calculations are larger for hot wall with directional property than cold wall with directional property. As n increases from 1.5, the trend changes are observed fur refractive index ratio about n=6.10

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.88-91
• /
• 2003

Electromagnetic interference shielding and near-infrared cutoff filters for plasma display panel application were designed and fabricated by radio frequency magnetron sputtering. Three types of the filters were prepared: the basic structure of type A consisted of [$TiO_2$ Ti Ag $TiO_2$]; type B, of [$TiO_2$ ITO Ag $TiO_2$]; type C, of [$TiO_2$ ITO Ag ITO $TiO_2$]. Ti and ITO layers deposited on Ag layers were employed as barriers to prevent the oxidation and the diffusion of Ag film into the adjacent oxide layers. Optical, electrical, chemical, and structural properties were investigated, and the result shows that the filters with the ITO barrier layers provided an enhancement in transmittance in the visible owing to a lower absorption of ITO layers than Ti layers. Type C filter showed better optical and electrical performances and smoother surface roughness than Type B and C filters: the average sheet resistance was as low as 1.51 $\Omega\Box$ (where $\square$ stands for a square film), the peak transmittance in the visible was as high as 78.2 %, and the average surface roughness was 1.48 nm.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.799-808
• /
• 1995

Transparent conductive films of aluminium doped zinc oxide (AZO) have been prepared by using the DC magnetron sputtering with the ZnO : Al (Al2O3 2 wt%) oxide target oriented to c-axis. Electrical and optical properties depended upon the O2/Ar gas ratio. The optical transmittance and sheet resistance of the AZO coated glass was 60~65% and 75Ω/$\square$, respectively at the O2/Ar gas ratio of 0. With the increase of the oxygen partial pressure to 2.0$\times$10-2, they were increased to the values of 81% and 1kΩ/$\square$, respectively. The films with the resistivities of 1.2~1.4$\times$10-3 Ω.cm, mobilities of 11~13 $\textrm{cm}^2$/V.sec and carrier concentrations of 3.5$\times$1020~4.0$\times$1020/㎤ were produced at the optimum O2/Ar gas ratio, which was 0.5$\times$10-2~1.0$\times$10-2. According to XRD analysis, the films have only one peak corresponding to the (002) plane, which indicates that there is a strong preferred orientation of the films. The grain size of ZnO films were calculated to 200~320 $\AA$, which was increased with the O2/Ar gas ratio and Ar gas flowrate.

• Journal of Acupuncture Research
• /
• v.23 no.5
• /
• pp.199-206
• /
• 2006

Objectives : The aim of this study was to investigate the effect of various electroacupuncture stimulation on neuronal nitric oxide synthase(nNOS) in cerebral cortex, brain stem, cerebellum of spontaneously hypertensive rats. Methods : We evaluated the changes of nNOS-positive neurons using a immunohistochemical method. The staining intensity of nNOS positive neurons was assessed in a quantitative fashion using a microdensitometrical method based on optical density by means of an image analyzer. Results : The average optical density of nNOS-positive neurons of 100 Hz (bipolar square wave 0.2 ms duration and 100 Hz frequency) electroacupuncture treatment group significantly decreased in most cortical areas comparison between the manual acupuncture and 2 Hz (bipolar square wave 0.2 ms duration and 2 Hz frequency) electroacupuncture groups. In the brain stem, the optical density of nNOS-positive neuron at superficial gray layer of the superior colliculus area, dorsolateral periaqueductal gray area and paralemniscal nucleus were same as cerebral cortex. Conclusion : We conclude that the morphological evidence for nNOS-positive neurons may be have regional change in cerebral cortex brain stem and cerebellum according to various electroacupuncture stimulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.13-17
• /
• 2002

For elimination DC component, the optical recording systems generally exploit WRDS (word-end running digital sum) criterion. However, its performance is degraded if the lengths of the control bits and codewords are increased. Another criterion is MSW (mean-square weight) method. Whereas MSW criterion has the complexity, this hs optimal performance. In this paper, we have proposed a new dc-component suppression method (MPRDS, minimum peak RDS) of the modulation codes for high density optical recording system. This method requires less complexity than MSW's, and the performance is near to MSW's even if the lengths of the control bits and codewords are increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.4
• /
• pp.139-144
• /
• 1983

In this paper, the ploarization and Faraday rotation properties of the single mode optical fiber have been investigated for magnto-optic current transformer application. On the analysis, the optical fiber is modeled as a linear retarder and the intrinsic birefreingence of the optical fiber is approximately found to be 2.57'/m from the measurement, and the bend-induced birefringence is proportional to the inverse square of bending radius. The polarization rotation sensitivity is foung to be F/H=1.4x$10^-5$rad/[A/m] from the analysis of Faraday rotation of single mode optical fiber.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.539-544
• /
• 2009

An estimation of 3D velocity field including occluded parts without maxing tracer to the fluid had not only never been proposed but also impossible by the conventional computer vision algorithm. In this paper, we propose a new method of three dimensional optical flow of the fluid based on physical model, where some boundary conditions are given from a priori knowledge of the flow configuration. Optical flow is obtained by minimizing the mean square errors of a basic constraint and the matching error terms with visual data using Euler equations. Here, Navier-Stokes motion equations and the differences between occluded data and observable data are employed as the basic constrains. we verify the effectiveness of our proposed method by applying our algorithm to simulated data with partly artificially deleted and recovering the lacking data. Next, applying our method to the fluid of observable surface data and the knowledge of boundary conditions, we demonstrate that 3D optical flow are obtained by proposed algorithm.