• 제목/요약/키워드: Optical Fiber(Fiber Optics)

검색결과 528건 처리시간 0.021초

전력선을 이용한 광케이블 현장 실증 시험 (A field trial of helically wrapping fiber optic cable onto existing 154KV Phase conductor.)

  • 신건학;이원빈;조홍근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.143-146
    • /
    • 1987
  • Fiber optics provide a solution to the problems at interference, capacity and reliability in communication. Approximately 20 kilometera of a six-fiber, multimode, longwave($1.3{\mu}m$), graded index silica glass fiber optic cable was helically wrapped around a phase conductor at a Korea Electric Power Corporation(KEPCO) 154KV transmission line. This paper presents an economic comparison of several fiber optic cable installation alternative and discusses the characteristics at the helically wrapped fiber cable, as well as the entire installation, including high voltage phase-to-ground (PTG) end termination, and splicing. The fiber link was installed for the field trial and practical use with overhead composite optical fiber cable which installation performed a few years earlier some other location and is intended to accommodate not only telephone but also supervisory Control and Data Acquisition(SCADA), protective relaying, and telemetry functions.

  • PDF

광섬유를 이용한 위치 다중화 구조의 체적 홀로그램 (Spatially multiplexed volume hologram using an optical fiber)

  • 강용훈;김기현;이병호
    • 한국광학회지
    • /
    • 제8권3호
    • /
    • pp.241-244
    • /
    • 1997
  • 체적 홀로그램을 저장하고 재생하는데 있어서 광섬유에서 유도되는 스페클 패턴을 이용하는 것을 제안하고, 이를 이론 및 실험적으로 연구하였다. 기준빔으로 광섬유에서 회절되는 스페클 패턴을 이용한 홀로그램 위치 다중화 구조는, 스페클 패턴의 상대적 위치 차이에 따라 상관 관계가 없어지는 특징을 이용하기 때문에 좋은 횡방향 위치 선택도를 가지게 하며 축방향 움직임에 대해서는 둔감한 안정성을 보여준다. 따라서 이러한 구조를 광 정보 저장 장치에 적용하면 저장 밀도를 높일 수 있으며 홀로그램 재생시의 안정도를 증가시킬 수 있다.

  • PDF

1300 nm 대역 파장 훑음 레이저의 훑음 주파수에 따른 출력 특성 (Characterization of Wavelength Swept Laser with a Scanning Frequency at 1300 nm)

  • 이병창;오민현;전민용
    • 한국광학회지
    • /
    • 제20권3호
    • /
    • pp.189-194
    • /
    • 2009
  • 광섬유 일체형으로 된 파브리-페롯 가변 필터를 레이저 공진기에 삽입하고, 1300 nm 대역의 반도체 광 증폭기를 이득매질로 이용하여 링 공진기 형태의 파장 훑음 레이저를 구현하였다. 파장 훑음 레이저의 훑음 주파수에 따른 레이저 출력 특성을 시간영역과 파장영역에서 분석하였다. 파장 훑음 주파수가 증가하면 레이저 출력이 급격하게 줄어들고, 훑음 반치폭도 감소한다. 또한 훑음 주파수 증가에 따라 전방 훑음과 후방 훑음의 광 세기가 비대칭으로 나타나며, 실제 응용 시스템에 적용할 수 있는 제한요소로 작용한다.

PQR 레이저의 1km 광섬유 전송 및 자유공간 특성 (1km Optical fiber transmission and free space characteristics of the PQR laser)

  • 김무성;곽규섭;김준연;김무진;권오대
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.322-325
    • /
    • 1999
  • We report fiber guiding experiments on the Photonic Quantum Ring(PQR) laser diode. In the 1km transmission measurements, we find that the PQR performs much better than the VCSEL. This suggests that the PQR laser is very promising candidate for LAN-range optical data communications. On the other hand, we have also fabricated 8$\times$8 PQR laser arrays and measured spatial decays for free space properties without using any guiding optics, which showed about 1m distance of spectral angle sensing.

  • PDF

금속박막을 증착한 광섬유 지연선로를 이용한 패킷 어드레스 검출기 제작 및 특성연구 (Fabrication and Characterization of Fiber-optic Packet Address Detectors Using Metal-Deposited Fiber-Optic Delay Line)

  • 전민용;신종덕
    • 한국광학회지
    • /
    • 제5권4호
    • /
    • pp.493-498
    • /
    • 1994
  • 광섬유 지연선로에 Cr/Au 박막을 증착하여 완전 광 슬라티드 링 통신망의 광 패킷 어드레스 검출기용 광섬유 정합 여파기를 제작하였다. 2.5Gb/s급 6-bit 어드레스 코드들에 대한 상관 파형을 시뮬레이션으로 얻었으며 측정된 상관 출력과 일치된 결과를 보였다.

  • PDF

Simulation of Terahertz Signal Generation by Dispersion-dependent Kelly Sidebands of Mode-locking Fiber Lasers

  • Weiqian Zhao;Mingya Shen;Youyou Hu;Ziye Wang
    • Current Optics and Photonics
    • /
    • 제7권4호
    • /
    • pp.443-448
    • /
    • 2023
  • The ±1-order Kelly sidebands with dispersion-dependent spacing of mode-locking fiber lasers are investigated for frequency-tunable terahertz signal generation. The principle of dispersion dependence of Kelly sidebands is analyzed. A new method, which is a dispersion-management mechanism introduced into the fiber-laser cavity, is proposed to generate Kelly sidebands with widely tunable wavelength spacing. A spacing tuning range of up to 28.46 nm of the ±1-order Kelly sidebands is obtained in simulation. Using the data of the optical spectrum with dispersion-dependent Kelly sidebands, the frequency spectrum of generated terahertz signals is calculated. Consequently, the signal frequency can be changed from 0.09 to 2.27 THz.

파장가변 광섬유 링 레이저를 이용한 아세틸렌(13C2H2) 분광 (Spectroscopy of acetylene (13C2H2) using a tunable erbium-doped fiber ring laser)

  • 유한영;오정미;이동한;문한섭;이원규;박갑동;서호성
    • 한국광학회지
    • /
    • 제14권6호
    • /
    • pp.674-679
    • /
    • 2003
  • 본 연구에서는 C-밴드와 L-밴드 파장(1525 nm-1625 nm)에서 파장 변화가 가능한 광섬유 링 레이저를 제작하고, 이를 이용하여 아세틸렌 분자 전이선에 대한 분광연구를 수행하였다. 제작된 광섬유 링 레이저는 공진기 내부에 FFP-TF(Fiber Fabry-Perot Tunable Filter)를 이용하여 약 102 nm(1510.4-1612.6 nm)의 범위에서 파장을 연속 가변할 수 있었다. 광섬유 링 레이저의 파장가변특성을 이용하여 C-밴드(1525-1565 nm)에서 흡수선이 많은 아세틸렌($^{13}$C$_2$H$_2$)분자에서 50개 이상의 전이선에 대하여 높은 신호대 잡음비를 갖는 흡수 스펙트럼을 측정하였다.

Ultraviolet Light Sensor Based on an Azobenzene-polymer-capped Optical-fiber End

  • Cho, Hee-Taek;Seo, Gyeong-Seo;Lim, Ok-Rak;Shin, Woojin;Jang, Hee-Jin;Ahn, Tae-Jung
    • Current Optics and Photonics
    • /
    • 제2권4호
    • /
    • pp.303-307
    • /
    • 2018
  • We propose a simple ultraviolet (UV) sensor consisting of a conventional single-mode optical fiber capped with an azobenzene-moiety-containing polymer. The UV light changes the dimensions of the azobenzene polymer, as well as the refractive index of the material. Incident light with a wavelength of 1550 nm was reflected at the fiber/polymer and polymer/air interfaces, and interference of the reflected beams resulted in spectral interference that shifted the wavelength by 0.78 nm at a UV input power of $2.5mW/cm^2$. The UV sensor's response to wavelength is nonlinear and stable. The response speed of the sensor is limited by detection noise, which can be improved by modifying the insertion loss of the UV sensor and the signal-to-noise ratio of the detection system. The proposed compact UV sensor is easy to fabricate, is not susceptible to electromagnetic interference, and only reacts to UV light.

방사성 오염도 측정을 위한 광섬유 검출기 제작 (Fabrication of Fiber-optics Detector for Measuring Radioactive Waste)

  • 김정호;주관식
    • 전기전자학회논문지
    • /
    • 제19권3호
    • /
    • pp.282-287
    • /
    • 2015
  • 본 연구에서는 연구에서는 Ce:GAGG 섬광체, 광섬유 그리고 광전자증배관을 이용하여 광섬유 검출기를 제작하였다. 섬광체의 단결정 크기는 MCNPX 코드를 이용하여 섬광체 깊이에 따른 감마선 계수효율을 전산모사하여 $3{\times}3{\times}20mm^3$로 설정하였다. 제작된 검출기는 표준 감마선원인 $^{137}Cs$$^{133}Ba$을 이용하여 세기의 따른 선형성 평가와 거리 변화에 따른 계수량 변화 측정을 하였다. 그 결과 추세선식 R-square 값이 0.99741로 매우 좋은 응답선형성을 보였고, 거리에 따른 검출 특성 또한 MCNPX값과 비교하였을 때 2% 이하로 좋은 검출특성을 보였다. 또한 단일선원과 혼합선원에서의 감마선 에너지 분광 결과 $^{137}Cs$은 662keV에서 그리고 $^{133}Ba$은 356keV에서 감마선 에너지 피크를 확인하였다. 광섬유 검출기를 사용한다면 작업자의 작업시간과 피폭을 줄여줄 것으로 보인다.