• ETRI Journal
• /
• 제29권5호
• /
• pp.633-640
• /
• 2007

We report an experimental demonstration of 40 Gbps all-optical 3R regeneration with all-optical clock recovery based on InP semiconductor devices. We also obtain alloptical non-return-to-zero to return-to-zero (NRZ-to-RZ) format conversion using the recovered clock signal at 10 Gbps and 40 Gbps. It leads to a good performance using a Mach-Zehnder interferometric wavelength converter and a self-pulsating laser diode (LD). The self-pulsating LD serves a recovered clock, which has an rms timing jitter as low as sub-picosecond. In the case of 3R regeneration of RZ data, we achieve a 1.0 dB power penalty at $10^{-9}$ BER after demultiplexing 40 Gbps to 10 Gbps with an eletroabsorption modulator. The regenerated 3R data shows stable error-free operation with no BER floor for all channels. The combination of these functional devices provides all-optical 3R regeneration with NRZ-to-RZ conversion.

• Journal of the Optical Society of Korea
• /
• 제8권3호
• /
• pp.127-131
• /
• 2004

This paper investigates applications of femtosecond lasers for the micromachining of transparent materials and fabrication of optical devices. We show commercial micromachining examples of transparent materials which have been fabricated for various applications. Near infrared femtosecond laser processing is an attractive method to fabricate three-dimensional optical waveguides into various transparent materials. Focused femtosecond laser pulses induce a permanent refractive-index change only near the focal point. We also demonstrate a Y coupler with the splitting ratio of 1:1 written by femtosecond laser pulses into a fused silica glass. The minimum propagation loss of 0.8 ㏈/㎝ awl the refractive-index change of 0.006-0.01 at the wavelength of 1550 ㎚ were achieved by optimization of the laser fluence.

• 한국광학회지
• /
• 제1권2호
• /
• pp.223-239
• /
• 1990

근래에 와서 통신 및 정보처리 기술에 있어서 기존의 전자공학적인 방법이 가지는 한계점을 광자공학적인 방법으로 보완하거나 극복하여 고속 및 대용량화를 가능케 하려는 움직임이 있다. 이러한 광통신 및 광정보처리 기술에 필요한 광재료 및 과자소자들에 적용되는 광자물리학을 살펴보고 또 앞으로의 연구 추세를 살펴보기로 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.9-14
• /
• 1996

The dependence of microstructural and optical properties of Ag-In-Sb-Te thin films on annealing heat-treatments was studied. It was found from the present work that the increase of reflectance after annealing heat-treatment is related with phase change of Ag-In-Sb-Te thin film from amorphous state to crystalline phases which involve Sb crystalline phase and AgInTe$_2$ stoichiometric phase. On the other hand, the reflectance is decreased after high temperature annealing (above 450$^{\circ}C$), due to the morphology .mange of film surface. For the purpose of practical application(erasable optical disk), we fabricated quadrilayered Ag-In-Sb-Te alloy disk, and annealed it with continuous laser beam. As result of this laser\ulcorner annealing treatment, we found that the increment of reflectance is 9.3% at 780nm wavelength. It might be considered that Ag-In-Sb-Te alloy optical disk is the big promising candidate for the erasable optical memory medium.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 광학 및 양자전자학 워크샵
• /
• pp.123-132
• /
• 1990

The method of characteristic matrix used in the calculation of multi-layered optical coating is applied to the analysis of DFB waveguide with arbitrary structure of grating by plecewise approximation where the DFB structure is devided into many sections in which the gain and period, amplitude and phase of DFB structure are assuced to be constant in each section. The DFB structure with two section is analyzed using this method of C-matrix. The possible applications for photonic devices using DFB waveguides are proposed.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.26-27
• /
• 2003

A wide variety of devices and systems exist whose main function is to generate an image. These devices and systems are used for many different purposes and find applications in many different walks of life. We are all very familiar with some of these systems such as the photographic camera (that can produce a permanent record of a scene on sensitized sheet material) and the television set (that can receive a suitably coded electromagnetic signal broadcast through space and convert it into an image). (omitted)

• 한국광학회지
• /
• 제18권1호
• /
• pp.50-55
• /
• 2007

본 연구에서는 광통신 시스템에 있어서 필수적인 기능으로 전망되고 있는 전광 논리소자를 구현하기 위한 집적된 광소자를 제작, 측정 하였다. 유기금속화학증착법(MOCVD)을 이용한 선택영역 성장기술을 이용하여 서로 다른 두 활성영역을 한 기판위에 성장함으로써 능동 반도체 광소자인 반도체 광증폭기와 수동 반도체 광소자인 다중모드 간섭 도파로, S-자 도파로를 집적하였다. 집적된 수동 소자부분의 손실을 측정하고 전광 논리소자를 구현하는 방법 중 하나인 반도체 광증폭기의 cross-gain modulation(XGM)특성을 측정하여 집적된 전광 논리소자로의 사용 가능성을 알아보았다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.55.4-55
• /
• 1998

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.224-229
• /
• 2003

We report a novel optical delay line that can be implemented using only optical fiber and fiber devices without the need for any bulk-optic devices such as lens, prism, and moving mirror. The dispersive property of a chirped fiber Bragg grating (CFBG) is exploited to get the delay. The proposed delay line constitutes two identical CFBGs cascaded in the reverse order with one of them being strained. Analysis reveals that the small displacement or the strain applied on the CFBG is effectively amplified in the delay line by the ratio of the minimum resonant wavelength and the reflection bandwidth of the CFBG. The dispersion properties of the CFBG with and without the strain are analyzed in detail. The theoretical performance of the proposed delay line is also discussed. Applications of the proposed delay line are expected in the field of high-speed optical coherence tomograpy.

• 한국통신학회논문지
• /
• 제40권2호
• /
• pp.380-384
• /
• 2015

As an extension of Visible Light Communication, Optical Camera Communications (OCC) will be a promising service for smart devices. Especially in line of sight marketing service and indoor localization application, by using camera which exists in smart devices, small amount of data (url link) can be broadcasted or find direction from the illumination system. This paper introduces the operation of wireless communications technology that transmits optical information from optical light source to camera, called Optical Camera Communications.