• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.2
• /
• pp.56-64
• /
• 2001

An optical temperature sensor based on the etched planar waveguide Bragg grating is developed and its performance is explored using theoretical and experimental methods. The planar waveguide is designed and fabricated using optical lithography and wet chemical etching. An efficient butt coupled optical fiber is used to examine the spectral characteristics of the grating sensor, and to investigate the grating parameters. The typical bandwidth and reflectivity of the surface etched grating has been ~0.2 nm and ~7%, respectively, at a wavelength of ~1,552 nm. The temperature-induced wavelength change of the optical sensor is found to be slightly non-linear over ${\sim}200^{\circ}C$ temperature range. Theoretical models for the grating response of the sensor based on waveguide and classical laminated plate deformation theories agree with experiments to within acceptable tolerance.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.129-136
• /
• 2007

자연광의 이용은 큰 어려움 없이 지속 가능한 에너지 기술을 구현할 수 있는 방안으로 고려되고 있다. 여러 개의 작은 반사경을 적용한 태양 추적식 자연채광 시스템은 비교적 단순한 메카니즘을 적용하여 그 성능과 효용성의 극대화를 꾀할 수 있으며, 또한 그 제작, 설치 작동 그리고 활용성에서 상당한 이점이 있다. 본 연구에서는 작은 mini-dish형 반사경(직경<30cm 이하)을 이용한 화이버 광학 집광기의 설계, 제작 및 작동 특성에 대하여 소개하고, 아울러 광추적 프로그램인 Photopia를 이용하여 그 성능에 대한 시뮬레이션을 수행하였다. 주요 구성 요소에서의 광추적에 의한 시뮬레이션 결과치는 실제 시스템의 설계 및 성능 예측에 중요한 기술적 데이터를 제공하며, 특히 실측이 곤란한 측정 면에서의 빛의 경로 해석에 유용하게 적용될 수 있다.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.67-79
• /
• 1997

We have designed the quasi optics of the dual channel receiver to observe the radio sources with 100GHz-band and 150GHz-band simultaneously. We introduced the general quasi optics and the relation between the Gaussian beam and thin lens approximation. We determined the parameters of the quasi optic components to match the beam waist at cassegrain focus with that of feed horn well.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.950-952
• /
• 1995

In this paper, a novel method which can recognize noised patterns by using a neural network is proposed. Patern recognition is processed by two networks and the processing mechanism is partially based on the results of neurophysiological studies. Synaptic activitoes of combining neurons between layers are implemented by spatial filters which approximate receptive fields of the modelled optic nerve cells.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.460-463
• /
• 1993

In this paper, The laser transmitter module is designed as the subsystem of the high repetitive laser rangefinder. The module consists of high voltage power supply, high voltage control circuits, high voltage discharger, electro-optic Q-switch driver, and laser resonator. The high voltage power supply is composed of 2-phase flyback converter. And it has 220W power level and 78% conversion efficiency. From the Q-switch driver of the crossed porro resonator, the phase retardation voltage is switched from 600V to -1500V with 200ns falling time. The module can be operated up to 15Hz. And it generates the laser pulse which has 20ns width and 80mJ.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.190-191
• /
• 2000

종래의 자기광학 디바이스는 자성체막을 빛이 투과할 때 얻어지는 페러데이 회전각을 이용했기 때문에, 페러데이 회전각을 증가시켜서, 광학적 성능을 증가시키려면 자성체막의 두께를 증가시켜야만 했다. 그러나, 자성체막의 두께를 증가시키면, 화소를 자기적으로 분리하기 위하여 자성체 막을 물리적으로 제거 해야하여 깊이가 깊어지고 그 후에 도선막을 구조화하기 위하여 파낸 화소간 갭을 다시 평탄화해야 하는 등의 제조 공정이 기술적으로 매우 어려워진다는 문제점을 가지고 있었다. 또한, 자성체 막의 두께가 증가하면, 도선막에 전류를 흘려 발생하는 자장은 도선막으로부터의 거리의 제곱에 반비례하므로, 두꺼운 자성체 막 전체에 강한 자장을 인가하기 위해서는, 도선막에 흘리는 전류를 증가시켜야만 한다는 문제점을 안고 있었다. (중략)

• Journal of the Optical Society of Korea
• /
• v.6 no.2
• /
• pp.27-32
• /
• 2002

An integrated optical 2$\times$2 add/drop multiplexer in X-cut, Y-propagating LiNbO$_3$ has been demonstrated. The device consists of passive polarization splitters and acousto-optical mode converters with weighted coupling utilizing tapered acoustical directional couplers; their specific design and properties are discussed. The insertion loss has been measured to be about -8.16 ㏈ and -8.6 ㏈ for TE and TM polarizations, respectively. The device shows a 3 ㏈ bandwidth of 2.3 nm, a tuning rate 8.34 nm/MHz around λ = 1554 nm, and a sidelobe suppression of about 14.5 ㏈. Optimum operation is achieved with a RF drive power of about 43 ㎽. Multi-wavelength operation has been demonstrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.165-169
• /
• 2000

High level vibrationional environments induced while launching of spacecraft can damage sensitive equipment or payloads, unless the equipment is properly designed. This is a critical issue for KOMPSAT-2 which will carry a high resolution electro-optic camera and a sophisticated attitude and orbit control system. Thus careful consideration on the launch environment is required in the design stage of spacecraft. This requires generation of vibration specification for each component. This paper describes the generation process of vibrational specification for KOMPAT-2, which is designed and tested by Korean engineers.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.85-88
• /
• 1989

Introducing and optimizing it-significance to the Hopfield model, ten highly correlated binary images, i.e., numbers "0" to "9", are successfully stored and retrieved in a 6x8 node system. Unlike many other neural networks models, this model has stronger error correction capability for correlated images such as "6", "8", "3", and "9". the bit-significance optimization is regarded as an adaptive learning process based on least-mean-square error algorithm, and may be implemented with another neural nets optimizer. A design for electro-optic implementation including the adaptive optimization networks is also introduced.uding the adaptive optimization networks is also introduced.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2139-2142
• /
• 1999

765kV substations which will be the core installation of the bulk power transmission system in Korea for the upcoming $21^{st}$ century, were designed of outdoor full GIS type to minimize required area. As principal equipment, main transformers of 2,000 MVA per bank and 50kA 8,000A gas insulated switchgears of up-to-date technology were adopted in designing substations to transmit bulk power of 10GW. Dual digital protective relay systems and distributed indication and control systems with fiber optic LAN were used.