• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.28-38
• /
• 2017

The study is to analyze the aggressive driving behavior in the protected/permissive left turn(PPLT) intersections in Gunsan City. As a result of the logistic regression model, increasing of driver's age and driving experience, non-peak time, no company, sedan and male have a tendency to behave aggressive driving to the opposite vehicles. When the vehicles try to turn the unprotected left in the PPLT intersection, the opposite vehicle drivers recognize them at the aggressive driving behavior if the distance to opposite vehicles is not enough. The relationship between driver characteristics and the distance to the opposite vehicles is analyzed under aggressive driving behavior. increasing of age and company, peak time tend to influence the short distance opposite vehicles while male and higher driving experience the middle and long distance. Sedan has the aggressive possibility to shorter distance opposite vehicles rather than others.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1223-1231
• /
• 2023

In the case of internal combustion engine vehicles, transmissions are essential for various reasons, such as vehicle starting and speed control. However, in the case of electric vehicles, unlike internal combustion engine vehicles, a transmission is not necessarily required. Of course, considering the efficiency of electric vehicles, a transmission is necessary, but installing the existing transmission as is has the opposite effect due to increased vehicle weight, so it has not been considered so far. In this paper, a non-contact reducer type using the Arago disc effect is proposed rather than a transmission using a conventional gear train, and the aim is to examine whether this can increase the driving efficiency of electric vehicles while minimizing weight. In addition, the effectiveness of the proposed reducer will be verified by manufacturing and testing it.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.313-320
• /
• 2011

Multi-axle driving vehicles that are used in special environments require high driving performance, steering performance, and stability. Among these vehicles, 6WS/6WD vehicles with middle wheels have structural safety by distributing the load and reducing the pitch angle during rapid acceleration and braking. 6WS/6WD vehicles are favored for military use in off road operations because of their high maneuverability and mobility on extreme terrains and obstacles. 6WD vehicles that using in-wheel motor can generate the independent wheel torque without other mechanical parts. Conventional vehicles, however, cannot generate an opposite driving force at each side wheel. Using an independent steering and driving system, six-wheel vehicles can show better performance than conventional vehicles. Using of independent steering and driving system, the 6 wheel vehicle can improve a performance better than conventional vehicle. This vehicle enhances the maneuverability under low speed and the stability at high speed. This paper describes an independent 6WS/6WD vehicle, consists of three parts; Vehicle Model, Control Algorithm for 6WS/6WD and Simulation. First, vehicle model is application of TruckSim software for 6WS and 6WD. Second, control algorithm describes the optimum tire force distribution method in view of energy saving. Last is simulation and verification.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.525-528
• /
• 2008

The research was conducted to investigate the characteristics of lateral wheel path distributions (wandering) in different traffic lanes. The Wandering may affect pavement life and various distress types. To achieve results presented that the normal distribution curve with symmetry was observed in the 3-lane roads. In the case of the 3-lane road (on one direction), 50-60cm, 65-85cm, and 80-95cm for the 1st, 2nd, and 3rd lanes, respectively. In addition, the 1st lane vehicles tended to pass on the right side to avoid th opposite side vehicles, while the outside lane vehicles tended to pass on the left side to avoid the walkway.

• Journal of the Society of Disaster Information
• /
• v.5 no.1
• /
• pp.30-44
• /
• 2009

Asphalt concrete pavements are often destroyed within the intended design life due to the increasement in traffic volume. The most common types of asphalt concrete pavement damages are permanent deformation and fatigue cracking, and so on. In this research, characteristics of traffic loadings and lateral wheel path distributions are analyzed using the field survey on traffic flow. The obtained traffic characteristics can be used to the decision making for the maintenance policy of roads. According to the traffic lane analysis for the 2nd and 3rd lanes, inner lane vehicles tended to pass to the right side to avoid the opposite side vehicles. In addition, the outside lane vehicles were deviated to the left side to avoid passengers. It is also noted that the lateral wheel path distributions was close to the normal distribution.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.140-145
• /
• 2005

The dynamic performances of railway vehicles, such as ride comfort, stability and safety, have the opposite characteristics of response each other according to design changes of suspensions. For this reasons, it is necessary that multidisciplinary engineers join in design processes of the suspensions so as to satisfy the requirements of dynamic performance with design constraints. Sometimes iterative dynamic analyses are required so many times during the design processes. In this paper, the development of integrated process environments and the dynamic analyses of railway vehicles based on the environments are presented. Using agent and wrapping technologies, process managements about the work process and design parameters were set up under the distributed computing environments. Also, dynamic analyses on the sample railway vehicle were carried out and the efficiency and improvement in future work were discussed as results.

• Journal of ILASS-Korea
• /
• v.22 no.4
• /
• pp.185-189
• /
• 2017

In Korea, sales of passenger cars using diesel and LPG fuels were continuously increased in recent years. From now on 2030, the registrated vehicles will close in about twenty five million in Korea. From these reason, Investigation on the comparison of exhaust emission characteristics of passenger cars using LPG and Diesel fuel in variation of driving mode and ambient conditions were conducted in this study. Exhaust emission characteristics of test vehicles were measured and analyzed by using chassis dynamometer and emission analyzer. Also, test vehicles were selected on the diesel vehicle with 1.7L engine and LPG vehicle with 2.0L engine. In order to study on emission characteristics according to driving cycles, CVS-75, NEDC, US06, SC03, Cold-FTP and HWFET were applied and the test conditions were set up the cases of A/C on and hot start. From these results, it is revealed that the NOx emission of diesel vehicle was higher than that of LPG vehicle and the case of CO emission shows the opposite patterns. In the HC emission, the emission increasing patterns not showed but the NOx emission of diesel vehicle and CO emission of LPG vehicle were showed the variation patterns according to the various driving modes.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.109-117
• /
• 2001

The median encroachment accident model proposed in this paper is the first step to develop cost-effective criteria about installing facilities preventing traffic accidents by median encroachment. This model consists of expected annual number of median encroachment on roadway and conditional probability to collide with vehicles on opposite lane after encroachment. Expected encroachment number is related to traffic volume and quote from a study of Hutchinson & Kennedy(1966). The probability of vehicle collision is composed of assumed headway distribution of opposite directional vehicles (negative exponential distribution), driving time of encroaching vehicle and Gap & Gap acceptance model. By using expected accident number yielded from the presented model, it will be able to calculate the benefit of reduced accident and to analyze the cost of installing facilities. Therefore this will help develop cost-effective criteria of what, to install in the median.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.97-105
• /
• 2010

An All-red clearance interval(AR) has been operating with amber signal in order to avoid collision between vehicles which cannot come out of the intersections, vehicles coming in from the opposite direction, and pedestrians(bicycles) on the crosswalk during the signal conversion time at the intersections. Foreign nations have been analyzing AR's influences of traffic accidents. On the other hand, the similar research has not been conducted in the country. The objective of this paper, therefore, is to analyze the safety at the intersections with respect to the installation of AR through the hypothesis test. A before-and-after analysis has been performed for 10 intersections where applied AR. From the 95% of significance level, the results of Non-parametric Test show that the installation of AR improves a safety at the intersections. The results indicates that AR discharges vehicles passing through the intersections and control entering vehicles at the intersections.

• Environmental and Resource Economics Review
• /
• v.29 no.3
• /
• pp.313-333
• /
• 2020

This paper shows that when the exchange rate changes, there are conflicting effects on improving the quality and increasing market share of eco-friendly vehicles. In a vertically differentiated duopoly model consisting of high quality clean cars and low quality internal combustion engine cars, I set up a two-stage noncooperative game under perfect information that the quality levels and the prices of the cars are competitively determined. The vehicles are assumed to be produced in countries that use distinct currencies. When the exchange rate of the country that produces low quality cars rises, the producer prefers to intensify competition due to the relatively lowed cost, and the incentive for quality improvement arises from the intension of attempting to reduce the degree of differentiation of quality level. At this time, the clean car manufacturing firm tries to avoid competition due to weakened competitiveness, and increases the quality level to expand quality differentiation. However, in this case, the market share of eco-friendly vehicles shrinks. On the other hand, if the exchange rate changes in the opposite direction, the market share of eco-friendly vehicles is expected to increase, but the quality of both cars are deteriorated, causing a conflict effect.