• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.149-153
• /
• 2003

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller. So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 [W] prototype equipped with digital signal processor TMS320F241.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.154-157
• /
• 2003

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller, So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 [W] prototype equipped with digital signal processor TMS320F241.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2008

In this paper a high efficiency soft switching boost converter is proposed for photovoltaic system. Using some resonant components, the circuit can be achieved the soft switching capability. Each of the switches in the proposed circuit performs ZV (Zero Voltage) or ZC (Zero Current) switching. Thus, the high efficiency characteristic can also be obtained, and then the size of the total system can be reduced. The operational modes of the verifying the effectiveness of the proposed circuit. As a matter of course, we will present the simulation results in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.232-237
• /
• 2006

Operation deflection shapes(ODS) is defined as a motion of structure at particular frequency. The ODS is eligible to show any types of structural motions while the modes supply solutions only to linear and stationary motion. The principal vibration source of an auto teller machine(ATM) case was occurred due to resonance which was found by modal analysis. To reduce the vibration of ATM case, the motion of the case was visualized using ODS analysis, which can suggest how to modify the structure. As a result the vibration of the ATM case was greatly reduced with a stiffening bar between the opposite plates.

• 설비공학논문집
• /
• 제25권10호
• /
• pp.555-561
• /
• 2013

The effects of applying the micro CHP system to the domestic sector in Korea were investigated using annual cooling and heating demand data. Four prime movers, micro gas turbine, PEMFC, gas engine and Stirling engine, were compared for three operational modes. Two way buy-back was assumed for both electricity and heat. The Stirling engine gave the lowest $CO_2$ emission per energy for 300kWh monthly electricity production. However, PEMFC became more effective when considering PURPA criteria. PEMFC generated the least greenhouse gas with higher electrical efficiency for cooling. The Stirling engine, however, became competitive for heating with higher total efficiency.

• 한국통신학회논문지
• /
• 제35권6B호
• /
• pp.875-887
• /
• 2010

The workgroup of IEEE 802 proposed the IEEE 802.16 standard, also known as WiMAX, to provide broadband wireless access (BWA). The standard specifies two operational modes, one is popular PMP mode, and the other is optional mesh mode. In the mesh mode, the network entry process-NetEntry is the pivotal procedure for mesh network topology formulation and thus, influences the accessibility of whole mesh network. Unfortunately, the NetEntry process suffers from the hidden neighbor problem, in which new neighborship emerges after a new node comes in and results in possible collisions. In this paper, we propose a new SN-protected NetEntry process to address the problem. Simulation results show that the new proposed NetEntry process is more stable compared with the standard-based NetEntry process.

• 한국추진공학회지
• /
• 제5권1호
• /
• pp.10-17
• /
• 2001

본 논문에는 러시아 중앙엔진연구소의 스크램젯 시험 설비의 공력 특성이 제시되었다. 본 논문에서 시험 설비 노즐 출구의 온도와 마하 분포는 마하 6의 비행 조건을 시뮬레이션하여 얻어진 것이다. 시험 설비 작동 범위에 스크램젯 모델을 설치한 조건에서 노즐 입구로 공기를 가열하지 않은 조건과 가열한 조건에서 분사함으로써 다양한 작동 모드의 유효 압력 차와 조절 특성을 얻었다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.849-852
• /
• 1993

This paper proposes a novel chaos generator using the model of Josephson junction. Constructing an equivalent circuit of Josephson element by using an operational amplifier, we have made a chaos generator. The feature of this generator is to generate several kinds of oscillations as well as chaotic oscillations by only changing a DC bias current to the junction. In this paper, it is described in detail how to construct the circuit and what kind of oscillations is realized in the circuit. The experimental results of oscillation modes are compared with simulation results with a satisfactory agreement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.57-61
• /
• 2002

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller. So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 W prototype.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.285-293
• /
• 2011

This paper proposes two SRM driving systems using a variable dc-link voltage controlled by a single-phase inverter. Two SRM converter topologies of a half bridge type and a full bridge type are proposed according to the power circuits of an inverter. The phase current can be controlled by means of a PWM controller at the inverter, and the turn-on/off angle at the phase switches can be controlled by a position sensor at the converter in the drive system. The inverter acts as a peak-current limiter if the transient current exceeds its maximum value. SRMs using the proposed topologies maintain high efficiency due to energy regeneration after the turn-off of power switches. The operational modes of the proposed topologies are verified by simulation and experimental results.