• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.40-47
• /
• 2009

Nowadays the diversity and large-capacity of electric appliances are strong effect on electrical fires augment in an alarming way. But, as the inactive response characteristics of the existing RCD (Residual Current protective Device) used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper is confirmed the unreliability of the existing RCD by electrical fault simulator and is proposed a Electrical Fire Disaster Prevention Device (EFDPD) by using a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the EFDPD has double protection function which operates self circuit breaker or rapidly cuts off the existing RCD. The proposed EFDPD is confirmed the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disaster, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1899-1909
• /
• 2007

A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.

• Journal of Korea Port Economic Association
• /
• v.32 no.3
• /
• pp.1-20
• /
• 2016

The objective of this study was to select world top 20 major container terminals that belong to Korea and China as comparison units to analyze their efficiency and productivity trend. Super Efficiency Data Envelopment Analysis(SE-DEA) and Malmquist Productivity Index(MPI) models were applied to this study. Compared with previous studies, we narrowed down the scope of the comparison units to terminals and conducted more detailed analysis to present more meaningful implications to the actual operation. The different result from existing studies, SE-DEA analysis implied that the major terminals of Busan New Port showed similar efficiency and productivity with China's terminals. In MPI analysis, the average index of Korean and China's terminals is 1.051 and 1.049. The analysis indicates that the productivity was improved 5.1% and 4.9% annually. From 2012 to 2015, the average terminal TCI index of South Korea and China were 1.032 and 1.0318-the main factor which influences MPI. This means improving productivity mainly rely on investment in new equipment and technology upgrades rather than improve operational efficiency over the past few years. Future management decisions should consider more aggressive marketing to increase the volume and improve operational efficiency to enhance productivity. Further research should apply the overall efficiency of the methodology considering the financial diversification, terminal capacity, service levels, and other factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.788-793
• /
• 2014

In this study, the electrical power consumption saving effect is studied through installing an inverter which is able to control the R.P.M. of marine sea water pump by effective flow control. The study looks at how sea water pump's flow control influences on the system without the Marine Growths Protection System(MGPS). Auxiliary sea water pump and refrigerator sea water pump in training ships, which are always operated not only in harbor but also in navigation, was used in the experiment and the experiment was conducted by dividing into harbor and navigation. As a result of research, in the case the sea water temperature is under $18^{\circ}C$, the operation was possible with a 58.3 % decrease in pump R.P.M. and electric power consumption was saved by 50 %. In spite of the sea water temperature increasing upto $34^{\circ}C$, pump R.P.M. at 91.6 % was sufficient to operate with a 20 % electric power consumption saving effect. In the pipelines without MGPS, lowering R.P.M. along with lowering pressure results in the attachment of various marine growths.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.1001-1010
• /
• 2021

Smart factories are complex systems which combine latest information technology (IT) with operation technology (OT). A smart factory aims to provide manufacturing capacity improvement, customized production, and resource reduction with these complex technologies. Although the smart factory is able to increase the efficiency through the technologies, the security level of the whole factory is low due to the vulnerability transfer from IT. In addition, the response and restoration of the business continuity plan are insufficient in case of damage due to the absence of factory security experts. The cope with the such problems, we propose an information security practice content for analyzing the damage by generating ransomware attacks in a digital twin-based smart factory similar to the real world. In our information security content, we introduce our conversion technique of physical devices into virtual machines or simulation models to build a practical environment for the digital twin. This content generates two types of the ransomware attacks according to a defined scenario in the digital twin. When the two generated attacks are successfully completed, at least 8 and 5 of the 23 virtual elements are take damage, respectively. Thus, our proposed content directly identifies the damage caused by the generation of two types of ransomware in the virtual world' smart factory.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.129-134
• /
• 2021

Recently, the demand for electricity is gradually increasing due to the rapid industrial development and the improvement of living standards. In the case of Korea, which is highly dependent on fossil fuels due to such a surge in electricity demand, reduction and freezing of greenhouse gas emissions due to international environmental regulations will immediately lead to a contraction in industrial activities. Accordingly, there are many difficulties in competition with advanced countries that want to link the environment with the country's industrial production activities, and the development of alternative energy as a countermeasure is of great interest around the world. Among these new power generation methods, small-scale power generation facilities with relatively small capacity include photovoltaic generation, wind power generation, and fuel cell generation. Among them, the fuel cell attracts the most attention in consideration of continuous operation, high power generation efficiency, and long-term durability, which are important factors for practical use. Therefore, in this paper, the fuel cell power generation system was researched and constructed by designing the power conversion circuit necessary to finally obtain the AC power used in our daily life by using the DC power generated from the fuel cell as an input.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Cross-Cultural Studies
• /
• v.49
• /
• pp.59-93
• /
• 2017

This paper provides an in-depth examination of the relationship between cinema and Giorgio Agamben's aesthetics and philosophy. Intersecting Agamben's key concepts including gesture, mediality, biopolitics, historicity, and profanation with historical and aesthetic dimensions of cinema, I argue for his ambivalent view on cinema and visual media. On the one hand, Agamben linked cinema and visual media to his discussion on biopolitics and spectacle as he considered them as apparatus for capturing and controlling gestures. On the other hand, he also argued that cinema could restore the image with capacity to preserve and recuperate gestures based on his consideration of montage as cinema's key aesthetic and technical component (an operation of profanation) and his Benjaminian thought on the ways in which montage suspended linear flow of images and activated an alternative memory of them. Drawing on history of cinema and optical devices in the 19th and early 20th centuries as well as examples of found footages of filmmaking predicated upon stoppage and repetition of images, I argue that Agamben's concept of potentialities can be extended into his thought on cinema and visual media apparatuses in general.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1161-1175
• /
• 2018

An unexpected event could be easily followed by a large secondary accident due to the limitation in sight of drivers in road tunnels. Therefore, a series of automated incident detection systems have been under operation, which, however, appear in very low detection rates due to very low image qualities on CCTVs in tunnels. In order to overcome that limit, deep learning based tunnel incident detection system was developed, which already showed high detection rates in November of 2017. However, since the object detection process could deal with only still images, moving direction and speed of moving vehicles could not be identified. Furthermore it was hard to detect stopping and reverse the status of moving vehicles. Therefore, apart from the object detection, an object tracking method has been introduced and combined with the detection algorithm to track the moving vehicles. Also, stopping-reverse discrimination algorithm was proposed, thereby implementing into the combined incident detection processes. Each performance on detection of stopping, reverse driving and fire incident state were evaluated with showing 100% detection rate. But the detection for 'person' object appears relatively low success rate to 78.5%. Nevertheless, it is believed that the enlarged richness of image big-data could dramatically enhance the detection capacity of the automatic incident detection system.

• Journal of International Area Studies (JIAS)
• /
• v.21 no.1
• /
• pp.39-72
• /
• 2017

The purpose of this study is to conduct an empirical analysis on the effect of aid proliferation on government spending on health by the recipient nations using panel data and acquire information on the direction of future ODA operations. In this study, calculated excessive foreign aid index with regard to the health sector of Sub-Sahara African nations and conducted an empirical analysis on the effect of aid fragmentation on government spending on health sector. The result of the analysis disclosed that aid fragmentation significantly reduced government spending on health. It is anticipated that such trend came from the mutual pursuit of profit between the attribute (the needs of the donor nation) of ODA projects after new businesses and the governments of recipient nations that want ODA funding. Because competitive and excessive supports in ODA projects induce distortion in the government budget operation of the recipient nations and thereby trigger disutility in ODA projects, Based on the result of the analysis, We proposed to incorporate a more comprehensive deliberation with regard to the capacity of the recipient nations as well as a need for the role of mediating body such as DAC.