• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.147-154
• /
• 2020

The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel's carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.131-149
• /
• 2014

The objective of this study is to describe and determine how and to what extent size of firm, operating vessels and interest cost, leverage, debit maturity, growth opportunity and cash flow affect the cash holdings of Korean shipping companies. A sample of 38 Korean shipping firms for a period of 9 years(from 2005 to 2013) was selected. In panel data regression, this study finds that cash holdings are negatively affected by firm size, operating vessel size and debit maturity, and positively affected by volume of interest costs. In firm's group of relatively large volume of operating vessel, it's cash holdings are affected by debit maturity, cash flows and growth opportunity but in firm's group of small volume of it, interest cost, debit maturity and operating vessel's size are related with cash holdings. It proved that determinants of cash holdings in a high interest costing group are size of operating vessel, interest cost and debt maturity. On the other hand, debit maturity, growth opportunity, firm size and extent volume of vessels are associated with cash holdings in relatively row interest costing group.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.498-513
• /
• 2001

Performed here is a comparative assessment study for the generation of the pressure- temperature (P/T) limit curve of the reactor vessel. Using the cooling or heating rate and vessel material properties, the stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during cool-down and heat-up. P/T limit curves are generated with respect to crack direction, clad thickness, toughness curve, cooling or heating rate and neutron fluence, and their results are compared.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.64-69
• /
• 2004

In recent years, Medium size high speed Ro-Pax vessel has appeared at European sea and especially Agean sea is a center of operating in this type of Ro-Pax. This vessel operates its high Froude number range and requires higher engine power due to considerably increased resistance in comparing to large Ro-Pax in high speed range. SHI has investigated this kind of high speed Ro-Pax in accordance with market requirements and developed more advanced vessel to meet the future market needs. Process of hull form development, model test results and design of general arrangement results are introduced in this paper.

• Structural Engineering and Mechanics
• /
• v.14 no.2
• /
• pp.191-208
• /
• 2002

A comparative assessment study for a generation of the pressure-temperature (P-T) limit curve of a reactor vessel is performed in accordance with ASME code. Using cooling or heating rate and vessel material properties, stress distribution is obtained to calculate stress intensity factors, which are compared with the material fracture toughness to determine the relations between operating pressure and temperature during reactor cool-down and heat-up. P-T limit curves are analyzed with respect to defect orientation, clad thickness, toughness curve, cooling or heating rate and neutron fluence. The resulting P-T curves are compared each other.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.22-29
• /
• 2008

This paper provides the evaluation method for the pressure vessel with internal wall-thinning defect, which is based on ASME design criteria. Pressure vessel has wall-thinning partially and patch reinforcement has been attached for reliable operating. However, present partial wall thinning could be through wall thinning at the next inspection time with present corrosion progress speed. Therefore safety margin was calculated for various conditions from present wall-thinning condition to additive patch reinforced condition via two-dimensional and three-dimensional, geometrically linear FE analyses using elastic materials.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.231-241
• /
• 2017

The purpose of this study was to analyze traffic safety assessments for fishing vessels near the southwest offshore wind farm. This study applied a collision model for safety assessment. It also involved a spatiotemporal analysis of vessels engaged in fishing to identify fishing hotspots around the offshore wind farm. This study used data from fishing vessel location transmission devices gathered over 1 year in 2014. As a result, in September, when the average number of vessels engaged in fishing is high, 62 ships were operating in fishing section 184-6 and 55 ships in section 184-6. In addition, in fishing sections 184-8 and 192-2, where an offshore wind farm was located, there were 55 and 38 ships operating, respectively. As the recovery period for a seaway near wind farm turbines is 55 years, it was determined that safety measures are required in order to reduce collision frequency while allowing fishing vessels to navigate through offshore wind farms. Meanwhile, the return period of Seaway B between the groups of generators considered was 184 years. A safety zone for offshore wind farms should be installed covering a distance of at least 0.3 NM from the boundary of turbines. Then, the collision return period was derived to be close to 100 years. Through this traffic safety assessment, it has been concluded that such measures would help prevent marine accidents.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.691-698
• /
• 2020

In this study, the effects of hydrodynamic interceptors on a high-speed vessel were investigated to identify the operating principle based on experiments. Model tests were performed using a high-speed towing carriage. The resistance, trim and rise of Center of Gravity (CG) of the high-speed vessel were measured for various ship speeds and interceptor heights. As the interceptor height increased, the trim and rise of CG were reduced. In order to quantitatively analyze these phenomena, the pressure at the stern bottom was measured using tactile sensors. The reliability of the measured results from the tactile sensors was verified through repeat tests. The pressure on the stern bottom increased in proportion to the interceptor height, as the interceptor partially blocked the flow there. Then, the trim was reduced. However, as the ship speed increases, the pressure at the location close to the interceptor decreases when the interceptor height is small, leading to increased trim. Therefore, the interceptor height for running attitude control should be carefully determined considering multiple factors in the operating condition of the high-speed planing hull.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.1
• /
• pp.34-43
• /
• 2012

In order to establish order in fishing industry by cracking down on illegal fishing vessels effectively, it is an essential requirement to identify marking such as the name of fishing vessel and a port of register more easily. Accordingly, it is quite natural that markings on fishing vessels should be marked clearly in an appropriate size on an appropriate site in order for them to be distinguished on the air such as from planes as well as on the sea. Actually, when examining marks such as the name of a vessel which are operating in the country, marks of most fishing vessels are too small as they cannot be distinguished with the naked eye even very closely. There is no coastal fishing vessel which marks the name of fishing vessel on the upper part in order to distinguish it from planes. Fishing vessel law generally which regulates the basic laws about shipbuilding regulates marks on fishing vessel, and fisheries law only regulates sign boards of fishing vessels. Problems and improvement of the marking system on fishing vessels suggested by this paper are as follows. First, in order to contribute to establish order in fishing industry, it would be desirable to tighten standards in fisheries law besides the fishing vessel law. Second, it is difficult to distinguish marks such as the name of a vessel as relevant laws allow fishers to make such marks too small. It is necessary to set the standard for marks larger than those regulated by the international treaty. Third, the relevant laws do not regulate a letter form of marks. Therefore, it becomes a factor to make small marks hard to be distinguished more. It is necessary to decide a clear letter form. Fourth, there is insufficient detailed international standards about the marking system. It is necessary to regulate a detailed standard.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.395-403
• /
• 2013

Fishing efficiency of the squid jigging vessel using the LED and metal halide fishing lamp combination was analyzed to reduce the cost for fishing operation utilizing the fishing light system for high degree of efficiency in the squid jigging fishery (one of the representative coastal and offshore fisheries in Korea). This study aims to improve the nature of existing LED lamps and to develop fan-shaped LED lights having 180W of power and ${\pm}45^{\circ}$ angle of light intensity distribution. The marine experiment for making a comparison of their fishing efficiency was tested by a 9.77 tons fishing vessel from Oct. through Dec. 2012. As a result, experimental fishing vessel showed slightly higher fishing efficiency than the average of metal halide lamp-equipped vessel and 20% energy savings. This means that the combination of LED and metal halide lamps would provide an efficient way to lower energy consumption while maintaining fishing efficiency.