• 제목/요약/키워드: Operating time delay

검색결과 212건 처리시간 0.03초

보상 알고리즘을 적용한 변압기 보호용 전류차동 계전방식 (Current Differential Relaying Algorithm for Power Transformer Protection Operating in Conjunction with a CT Compensating Algorithm)

  • 강용철;박종민;이미선;장성일;김용균;소순홍
    • 전기학회논문지
    • /
    • 제56권11호
    • /
    • pp.1873-1878
    • /
    • 2007
  • Current differential relays may maloperate during magnetic inrush and over-excitation because a significant differential current is produced. To prevent maloperation, the relays adopt some harmonic components included in the differential current. The harmonic restraints may increase the security of a relay but cause the operating time delay of a relay when an internal fault occurs. Moreover, the operating time delay is more increased if a current transformer (CT) is saturated. This paper describes a current differential relaying algorithm for power transformer protection with a compensating algorithm for the secondary current of a CT. The comparative study was conducted with and without the compensating algorithm. The performance of the proposed algorithm was investigated when the measurement CT (C400) and the protection CT (C400) are used. The proposed algorithm can compensate the distorted current of a CT and thus reduce the operating time delay of the relay significantly for an internal fault with CT saturation.

CAN기반 분산 제어시스템의 종단 간 지연시간 분석과 협조 스케줄링 알고리즘 개발 (Development of Coordinated Scheduling Algorithm and End-to-end Delay Analysis for CAN-based Distributed Control Systems)

  • 이희배;김홍열;김대원
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제53권7호
    • /
    • pp.501-508
    • /
    • 2004
  • In this paper, a coordinated scheduling algorithm is proposed to reduce end-to-end delay in distributed control of systems. For the algorithm, the analysis of practical end-to-end delay in the worst case is performed priory with considering implementation of the systems. The end-to-end delay is composed of the delay caused by multi-task scheduling of operating systems, the delay caused by network communications, and the delay caused by asynchronous timing between operating systems and network communications. Through some simulation tests based on CAN(Controller Area Network), the proposed worst case end-to-end delay analysis is validated. Through the simulation tests, it is also shown that a real-time distributed control system designed to existing worst case delay cannot guarantee end-to-end time constraints. With the analysis, a coordinated scheduling algorithm is proposed here. The coordinated scheduling algorithm is focused on the reduction of the delay caused by asynchronous timing between operating systems and network communications. Online deadline assignment strategy is proposed for the scheduling. The performance enhancement of the distributed control systems by the scheduling algorithm is shown through simulation tests.

Design of Group Delay Time Controller Based on a Reflective Parallel Resonator

  • Chaudhary, Girdhari;Choi, Heung-Jae;Jeong, Yong-Chae;Lim, Jong-Sik;Kim, Chul-Dong
    • ETRI Journal
    • /
    • 제34권2호
    • /
    • pp.210-215
    • /
    • 2012
  • In this paper, a group delay time controller (GDTC) is proposed based on a reflection topology employing a parallel resonator as the reflection termination. The design equations of the proposed GDTC have been derived and validated by simulation and experimental results. The group delay time can be varied by varying the capacitance and inductance at an operating frequency. To show the validity of the proposed circuit, an experiment was performed for a wideband code division multiple access downlink band operating at 2.11 GHz to 2.17 GHz. According to the experiment, a group delay time variation of $3{\pm}0.17$ ns over bandwidth of 60 MHz with excellent flatness is obtained.

한 대학병원의 수술실 이용 지연요인과 개선방안에 관한 연구 (Delayed use of Operating Rooms in a University Hospital)

  • 김경애;유승흠;김인숙;손태용;박은철
    • 한국병원경영학회지
    • /
    • 제7권3호
    • /
    • pp.44-62
    • /
    • 2002
  • Advanced surgical technology demands more precise, meticulous, and time-consuming procedures. In addition, the patient's preference of tertiary health providers makes over crowding of the University Hospitals. Therefore, it has been necessary to maximize utilization of the operating room of such hospitals to accommodate these requirements. This study, targeting 1,302 surgical cases performed in 22 operating rooms at a university hospital in Seoul from October 8 to November 1, 2001, analyzed reasons for delay, and factors that caused delayed use of operating rooms. This study also assessed that the rate of operating room use would increase if the sources for possible reform were improved. 1. Among total of 1,302 cases of surgery, the incidence of surgeries in which there were no time delays and no factors for delay were discovered is 71.4% or 930 cases: the incidence in which surgeries were delayed was 28.6% or 372 cases. 2. As results of logistic regression for delay, procedures involving women were delayed 1.4 times more frequently than those of men. Compared to Department A, Department B was 1.8 times more likely to be delayed, and Department H was 0.4 times less likely to be delayed. Regional anesthesia was 2.4 times more likely to be delayed than general anesthesia, and surgeries that PCA was applied were 0.6 times less likely to be delayed than those when it was not. Surgeries performed on the Thursday were 1.7 times more likely to be delayed than those performed on the Monday. Compared to surgeries performed between 07:00-07:59, those performed between 08:00-08:29 were 4.3 times higher. 3. The reasons for delay were related to surgeon, surgical department, patient, anesthesia, administrative system, sick ward, and support services. Among these, 5,755 minutes for 276 delayed cases could be resolved easily, and resolving delays of 3,320 minutes for 131 cases would be more difficult. Among the causes for delay that could be improved, delays due to patient's transfer and surgeon's factor were the most common, 21.6% and 17.4% respectively. 4. If resolvable delays are improved, pre-anesthesia room is administered, and regional anesthesia and PCA are done ahead of time, use of emergency operating rooms will increase, we can increase overall utilization by 4.09%, we will save 744 minutes a day, we can reduce the time the operation room is used after 4 PM by 35%, and we can resolve the operation cancellations due to insufficient operating rooms. For the increase in the use of operating rooms, we need to maximally decrease the delays that could be improved, by allocating block time based on used totals hours of elective cases, giving accurate information on surgery schedule, voluntary cooperation by staff participating in surgeries in reducing delay time, and the hospital management's will to improve delay.

  • PDF

개선된 동작 주파수 특성을 갖는 차동 전압 클램프 VCO 설계 (A Design of Differential Voltage Clamped VCO for Improved Characteristics of Operating Frequency)

  • 김두곤;오름;우영신;성만영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 D
    • /
    • pp.3181-3183
    • /
    • 2000
  • As the fact that the simple data of text and sound in early year have been changed to be high quality images and sounds. PLL(Phase-Locked Loop) system plays an important role in communication system. VCO(Voltage Controlled Oscillator) is the most important part in PLL system because it can have critical effects on operation of PLL. Recently, it has been raised the necessity of high speed and high accuracy circuit application. In this paper, a new differential voltage clamped VCO using negative-skewed path is suggested. Using a dual-delay scheme to implement the VCO, higher operation frequency and wider tuning are achieved simultaneously. The dual-delay scheme means that both the negative skewed delay paths and the normal delay paths exist in the same ring oscillator. The negative skewed delay paths decrease the unit delay time of the ring oscillator below the single inverter delay time. As a result, higher operation frequency can be obtained. The whole characteristics of VCO are simulated by using HSPICE. Simulation results show that the resulting operating frequencies are 50% higher than those obtainable from the conventional approaches.

  • PDF

A Single DOF Magnetic Levitation System using Time Delay Control and Reduced-Order Observer

  • Park, Jung-Soo;Baek, Yoon-Su
    • Journal of Mechanical Science and Technology
    • /
    • 제16권12호
    • /
    • pp.1643-1651
    • /
    • 2002
  • Magnetic levitation systems are required to have a large operating range in many applications. As one method to solve this problem, Time Delay Control (TDC) is applied to a single-axis magnetic levitation system in this paper A reduced-order observer is utilized to estimate states excluding measurable states in the control law. The system consists of a square air-core solenoid and a circular permanent magnet attached on a plastic ball. Theoretical magnetic forces of the system are obtained on the basis of the location of the magnet around the solenoid. The magnetic levitation force is obtained by the experiment, and then compared with the theoretical one. As the results of the control experiments, the nonlinear controller (TDC : 1-2 ㎜) has a larger operating range than the linear controller (PD control : 1-1.4 ㎜), and is superior to linear. control in the robustness to the modeling uncertainty and the performance of the disturbance rejection.

신호교차로의 차량운행비용 특성을 고려한 경제성분석 모형개발 (A Study on the Development of an Economic Efficiency Model Considering Vehicle Operating Cost Properties of Signalized Intersections)

  • 변은아;김영찬;안소영;고광덕;윤수영
    • 대한교통학회지
    • /
    • 제27권2호
    • /
    • pp.199-206
    • /
    • 2009
  • 교통시설 투자평가에 대한 경제성 분석과 관련하여 일반적인 예비타당성조사 지침 및 투자평가지침에서 적용하는 차량운행 비용 절감편익 중 유류비 산정 자료는 차량운행시 유류소모량과 주행속도와의 관계만을 고려하여 분석하고 있다. 신호로 인한 정지지체가 발생하지 않는 연속류의 경우 주행속도와 통행시간의 변화로 인한 절감편익에 대한 고려가 가능하나, 실제 신호교차로상에 신호제어로 인해 정지가 발생하는 단속류에 대해서는 정지지체시간감소 및 정지율 개선에 대한 고려가 없어 개선 효과분석의 현실반영이 어렵다. 따라서 기존 연구에 정지지체시간감소에 따른 절감편익을 보완하여 차량운행비산정 모형 관계식을 개발함으로써 신호교차로 특성을 반영한 편익을 분석 할 수 있는 기틀을 만드는 데 본 연구의 목적을 두었다. 공회전시 유류소모량 적용으로 정지지체시간를 고려한 차량운행비용을 재정립하였고, 서산시 가로축 2개에 대한 교통신호체계 최적화사업에 적용하여 기존 모형 적용시와 개발모형 적용시 경제적 편익에 대하여 분석하였다. 도로의 혼잡지역 증가로 교통체계관리의 중요성이 부각되는 가운데 신호연동체계 개선 및 혼잡개선 사업등의 효과분석에 있어 신호교차로 특성을 고려한 경제성 분석의 모형제시를 통해 지체도 개선을 반영한 좀 더 현실적 경제성분석에 도움을 줄 수 있을 것으로 기대한다.

Identification of the process in closed-loop control system

  • Oura, Kunihiko;Akizuki, Kageo;Hanazaki, Izumi
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
    • /
    • pp.140-145
    • /
    • 1994
  • In this paper, we consider a problem to estimate process parameters using input-output data collected from the process operating in closed-loop control system. When orders and delay-time of the process are known correctly, under some conditions of identifying experiments, it is reported that accurate identification results can be obtained by applying prediction error method. To get accurate estimates, it is necessary to know orders and delay-time of the process. It is difficult to determine them in closed-loop identification, because ill-condition for identification are easily caused by selection of unsuitable order or delay time. Furthermore, the procedures to select orders and delay-time in open-loop identification aren't always available in closed-loop identification. The purpose of this paper is to determine a delay-time under suitable assumption that order of the process are known as the first step.

  • PDF

상태 전환 준비 방법을 이용한 저전력 알고리즘 (A Low Power Algorithm using State Transition Ready Method)

  • 윤충모
    • 한국전자통신학회논문지
    • /
    • 제9권9호
    • /
    • pp.971-976
    • /
    • 2014
  • 본 논문은 상태 전환 준비 방법을 이용한 저 전력 알고리즘을 제안하였다. 제안한 알고리즘은 태스크를 휴면 상태와 유휴 상태, 동작 상태로 구분하여 상태를 정의 한다. 각각의 상태 전환이 발생될 때 발생되는 지연시간으로 인하여 발생되는 소모 전력을 줄이기 위해 각각의 상태 중간에 준비 상태를 삽입한다. 준비 과정은 상태의 전환에서 발생되는 소모 전력과 지연시간을 고려한다. 지연시간이 긴 경우에는 스케줄링에서의 단계를 초과하여 수행 단계를 증가시키는 문제를 발생시킨다. 수행 단계의 증가는 소모 전력의 증가를 초래한다. 상태 전환에서 지연시간이 가장 긴 휴면 상태에서 동작 상태로 상태가 전환될 때 발생되는 시간지연으로 인하여 발생되는 동작시간의 증가를 줄여 전체 소모 전력을 줄이게 된다. 실험은 저 전력 알고리듬인 참고문헌 [6]과 비교하였다. 실험결과 참고문헌 [6]보다 소모 전력이 감소되어 알고리듬의 효율성이 입증되었다.

RSFQ 논리회로의 개발과 회로설계에 대한 지연시간 고려 (Development of RSFQ Logic Circuits and Delay Time Considerations in Circuit Design)

  • 강준희;김진영
    • Progress in Superconductivity
    • /
    • 제9권2호
    • /
    • pp.157-161
    • /
    • 2008
  • Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

  • PDF