• 공학교육연구
• /
• 제19권3호
• /
• pp.44-53
• /
• 2016

In the engineering students, MSC is the most important basic areas in education. Also, the calculus is a main subject in the MSC. So calculus has been operating the annual number of courses at the university. We introduced the concept of joint control ; the joint syllabus, test and assessment. In harsh conditions to maintain joint control system of the calculus, we built a computer-aided-system to manage web-based result processing system. In this paper, we discussed the necessity and effectiveness of joint control system for calculus.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1658_1659
• /
• 2009

PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.

• 복식
• /
• 제44권
• /
• pp.168-179
• /
• 1999

In order to settle down structural causes of the process of distribution and apparel production in domestic fashion industry, and to raise competitive power with changing market environment, we need to bulid up Quick Response(QR) system based on information technology such as EDI(Electronic Data Interchange), KAN(Korea Article Number), and POS(Point of Sales), POS is the most valuable information tool to promote QR system paractically. The purpose of this study was to investigate motivation of POS adoption, problems in operating the system, and satisfaction on POS effects. Data were collected by sending questionnaire to the managers in apparel firms which were using POS. Statistical devices were t-test, frequency with SAS program. The results fo the study were as follows: 1. The degree of satisfaction to POS effects was rather good. Especially, rapid evaluations on new products gave the greatest satisfaction to the users. 2. Satisfaction degree of POS effects according to introduces time and organization characteristic(number of employees) have no significant difference, but the firms which have higher annual sales volume showed higher satisfaction degree. Merchandise department showed higher satisfaction on POS effects. 3. The motivation of POS adoption was an effective logistics control with consumer information as a marketing strategy. The problems in operating the system were lack of investment, and professionals. They almost didn't have KAN code, instead, have their own code system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.181-184
• /
• 2002

In this paper, an algorithm is proposed for the automatic movement of the platform on a ladder lift which operates by using hydraulic force. Experimental data of the manual movement operated by experts are acquired and analyzed. The length of movement of the platform is estimated by the number of pulses from an encoder while the platform is moving. The operating characteristics have been extracted from the data. The number of pulses varies whenever the weight of load varies. We propose a model to compensate the difference of the number of pulses. An automatic movement algorithm based on the model is proposed. The platform can start and stop smoothly at the starting point and the destination point. Experimental results show that the error distance at the destination point is less than 5 cm when the length of the ladder is 23 m.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.319-322
• /
• 1990

Self-controlled permanent magnet synchronous motor (PMSM) has similar operating characteristics as seperately excited dc motor. It is favored in servo applications due to its improvement of efficiency and maintenance. This paper presents completely digitalized controller using microprocessor and voltage fed inverter. The speed control system for PMSM is implemented. To control the motor speed, the control system regulates the magnitude of Inverter output voltage by regular-sampled PWM method to generate sinusoidal PWM wave with microprocessor. And to keep the range of inverter switching frequency, it varies the number of pulse train according to the speed.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.11-20
• /
• 2003

In Flexo printing machine, it's operated with combination of blanket cylinder and cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical noise when the two cylinders encounter with the grooves. So, in this study, we developed a mechanical noise control algorithm of printing in servo control system. Then we have reduced the mechanical noise with control of servo actuator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2710-2711
• /
• 2002

Conventional direct moxibustion remedy for cancer medical treatment has used a number of moxa lump for a surgical operation of patient However such a remedy has troubles in operating the moxibustion and causes the risk of burn. In order to get rid of the problems we have suggested the multiple heating pad with the Artemisia patch.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권2호
• /
• pp.107-114
• /
• 2018

In recent years, ESS (Energy Storage System) has been widely used in various parts of a power system. Especially, due to its fast response time and high ramp rate, ESS is known to play an important role in regulating grid frequency and providing rotational inertia. As the number of installed and commercially operating ESSs increases, the reliability becomes an important issue. This paper introduces control schemes and presents its test method for grid-connected ESS for primary frequency regulation. The test method allows to verify the control operation in the individual operation mode and state. A validation of the method through actual ESS test in a electrical substation is presented in the case study section.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.143-148
• /
• 2001

Relatively high rotating speed propulsion shafting system of the large Ro-Ro Ferry has a greate risk of the resonance of the whirling vibration within the operating speed range. Therefore, it is necessary to control the whirling vibration characteristics of the shafting system in the initial design stage so as not to be resonant with the blade number order excitation in the normal operating speed range. The results of the whirling vibration analysis for l000P Ro-Ro Ferry with SHI's in-house program and the measured results during the sea trial are introduced. Additionally the outline of the program and the calculation method of the major properties are presented.