• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1172-1175
• /
• 2020

Automotive ECU integrates CPU core, IVN controller, memory interface, sensor interface, I/O interface, and so on. Current automotive ECUs are often developed with proprietary processor architectures. However, demends for standard processors such as ARM and RISC-V increase rapidly for saftware compatibility in autonomous vehicles and connected cars. In this paper, an automotive ECU is designed for parking assist system based on RISC-V with open instruction set architecture. It includes 32b RISC-V CPU core, IVN controllers such as CAN and LIN, memory interfaces such as ROM and SRAM, and I/O interfaces such as SPI, UART, and I2C. Fabricated in 65nm CMOS technology, its operating frequency, area, and gate count are 50MHz, 0.37㎟, and 55,310 gates, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.331-340
• /
• 2021

As the communication industry develops, the development of SoC (System on Chip) is increasing. Accordingly, the paradigm of technology design of industries and companies is changing. In the existing process, companies purchased micro-architecture, but now they purchase ISA (Instruction Set Architecture), and companies design the architecture themselves. RISC-V is an open instruction set based on a reduced instruction set computer. RISC-V is equipped with ISA, which can be expanded through modularization, and an expanded version of ISA is currently being developed through the support of global companies. In this paper, we present benchmarking frameworks ARIA, LEA, and PIPO of Korean block ciphers in RISC-V. We propose implementation methods and discuss performance by utilizing the basic instruction set and features of RISC-V.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2022

RISC-V is an open-source instruction set architecture which has a simple base structure and can be extensible depending on the purpose. In this paper, we designed a small and low-power 32-bit RISC-V processor to establish the base for research on RISC-V embedded systems. We designed a 2-stage pipelined processor which supports RISC-V base integer instruction set except for FENCE and EBREAK instructions. The processor also supports privileged ISA for trap handling. It used 1895 LUTs and 1195 flip-flops, and consumed 0.001W on Xilinx Zynq-7000 FPGA when synthesized using Vivado Design Suite. GPIO, UART, and timer peripherals are additionally used to compose the system. We verified the operation of the processor on FPGA with FreeRTOS at 16MHz. We used Dhrystone and Coremark benchmarks to measure the performance of the processor. This study aims to provide a low-power, high-efficiency microprocessor for future extension.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.76-84
• /
• 2009

This paper proposes a SOC platform which is eligible for education and application SOC design. The platform, fully synthesizable and reconfigurable, includes the OpenRISC embedded processor, some basic peripherals such as GPIO, UART, debug interlace, VGA controller and WISHBONE interconnect. The platform uses a set of development environment such as compiler, assembler, debugger and RTOS that is built for HW/SW system debugging and software development. Designed SOC, IPs and Testbenches are described in the Verilog HDL and verified using commercial logic simulator, GNU SW development tool kits and the FPGA. Finally, a multimedia SOC derived from the SOC platform is implemented to ASIC using the Magnachip cell library based on 0.18um 1-poly 6-metal technology.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.376-382
• /
• 2008

Developing highly cost-efficient and reliable embedded systems demands hardware/software co-design and co-simulation due to fast TTM and verification issues. So, it is essential that Platform-Based SoC design methodology be used for enhanced reusability. This paper addresses a reusable SoC platform based on OpenCores soft processor with reconfigurable architectures for hardware/software codesign methodology. The platform includes a OpenRISC microprocessor, some basic peripherals and WISHBONE bus and it uses the set of development environment including compiler, assembler, and debugger. The platform is very flexible due to easy configuration through a system configuration file and is reliable because all designed SoC and IPs are verified in the various test environments. Also the platform is prototyped using the Xilinx Spartan3 FPGA development board and is implemented to a single chip using the Magnachip cell library based on $0.18{\mu}m$ 1-poly 6-metal technology.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.27-32
• /
• 2022

RISC-V is an open instruction set architecture (ISA) developed in 2010 at UC Berkeley, and active research is being conducted as a processor to compete with ARM. In this paper, we propose an SoC system including an RV32I ISA-based 32-bit 5-stage pipeline processor and AHB bus master. The proposed RISC-V processor supports 37 instructions, excluding FENCE, ECALL, and EBREAK instructions, out of a total of 40 instructions based on RV32I ISA. In addition, the RISC-V processor can be connected to peripheral devices such as BRAM, UART, and TIMER using the AHB-lite bus protocol through the proposed AHB bus master. The proposed SoC system was implemented in Arty A7-35T FPGA with 1,959 LUTs and 1,982 flip-flops. Furthermore, the proposed hardware has a maximum operating frequency of 50 MHz. In the Dhrystone benchmark, the proposed processor performance was confirmed to be 0.48 DMIPS.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.81-86
• /
• 2023

Recently, demand for embedded systems requiring low power and high specifications has been increasing, and RISC-V processors are being widely applied. RISC-V, a RISC-based open instruction set architecture (ISA), has been developed and researched by UC Berkeley and other researchers since 2010. RV32I ISA is sufficient to support integer operations such as addition and subtraction instructions, but M-extension should be defined for multiplication and division instructions. This paper proposes an RV32I, RV32IM processor, and indicates benchmark performance scores compared to an existing processor. Additionally, A non-stalling method was proposed to support a 2-stage pipelined DSP multiplier to the 5-stage pipelined RV32IM processor. Proposed RV32I and RV32IM processors satisfied a maximum operating frequency of 50 MHz on Artix-7 FPGA. The performance of the proposed processors was verified using benchmark programs from Dhrystone and Coremark. As a result, the Coremark benchmark results of the proposed processor showed that it outperformed the existing RV32IM processor by 23.91%.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.76-81
• /
• 2024

UC Berkeley developed RISC-V, which is an open-source Instruction Set Architecture. This paper proposes a 32-bit 6-stage pipeline architecture based on the RV32I RSIC-V. The performance of the proposed 6-stage pipeline architecture is compared with the existing 32-bit 5-stage pipeline architecture also based on the RV32I processor ISA to determine the impact of the number of pipeline stages on performance. The RISC-V processor is designed in Verilog-HDL and implemented using Quartus Prime 20.1. To compare performance the Dhrystone benchmark is used. Subsequently, peripherals such as GPIO, TIMER, and UART are connected to verify operation through an FPGA. The maximum clock frequency for the 5-stage pipeline processor is 42.02 MHz, while for the 6-stage pipeline processor, it was 49.9MHz, representing an 18.75% increase.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.45-48
• /
• 2003

We can easily buy network system for high performance micro-processor, progress computer architecture is caused of high bandwidth and low delay time. Coupling PC-based commodity technology with distributed computing methodologies provides an important advance in the development of single-user dedicated systems. Lately Network is joined PC or workstation by computers of high performance and low cost. Than it make intensive that Cluster system is resembled supercomputer. Unix, Linux, BSD, NT(Windows series) can use Cluster system OS(operating system). I'm chosen linux gain low cost, high performance and open technical documentation. This paper is benchmark performance of Beowulf clustering by UltraSPARC-1K(64bit-RISC processor). Benchmark tools use MPI(Message Passing Interface) and NetPIPE. Beowulf is a class of experimental parallel workstations developed to evaluate and characterize the design space of this new operating point in price-performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.397-400
• /
• 2009

This paper describes ASIC design of Multimedia application SoC platform based RISC processor with BTB(Branch Target Buffer). For performance enhancement of platform, we use a simple branch prediction scheme, BTB structure, that stores a target address for branch instruction to remove pipeline harzard. Also, the platform includes a number of peripheral such as VGA controller, AC97 controller, UART controller, SRAM interface and Debug interface. The platform is designed and verified on a Xilinx VERTEX-4 FPGA using a number of test programs for functional tests and timing constraints. Finally, the platform is implemented into a single ASIC chip which can be operated at 100MHz clock frequency using the Chartered 0.18um process. As a result of performance estimation, the proposed platform shows about 5~9% performance improvement in comparison with the previous SoC Platform.