• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.906-909
• /
• 2012

The address discharge characteristics of a open dielectric structure compared with the conventional panel structure are investigated by measuring the discharge firing voltage. The open dielectric structure could easily produce the discharge between the scan and the sustain electrodes by erasing the dielectric layer between two electrodes. Due to the changes in the discharge firing characteristics of the open dielectric structure between the two sustain electrodes, the conventional reset waveform including the address waveform needs to be modified. The modified driving waveform suitable for the open dielectric structure is proposed and examined in AC PDP.

• 전자공학회논문지
• /
• 제51권1호
• /
• pp.179-184
• /
• 2014

교류형 플라즈마 디스플레이에서의 Vt 폐곡선 측정에 기초하여 개방형 유전체 구조에서 방전 전압과 내부 벽전압 등의 방전 특성이 종래의 구조와 비교되어 조사되었다. 일반적인 교류형 플라즈마 디스플레이의 구조에서 상판은 유리, 전극, 유전체 등으로 이루어져 있는데, 개방형 유전체 구조는 상판 전극사이에 있는 유전체를 제거하여 상판에 있는 유지 전극간의 방전이 더욱 쉽게 발생하도록 하는 구조이다. 개방형 유전체 구조는 종래의 구조와 다르기 때문에 종래의 구동파형으로 구동시에 여러 가지 문제가 발생한다. 특히 상판의 두 전극인 주사와 유지전극 간 방전 개시전압이 달라지기 때문에 종래의 기입 파형을 포함한 초기화 파형도 수정되어야 한다. 본 연구에서는 종래와 개방형 유전체 구조에서 3 전극의 방전개시전압을 비교하기 위하여 Vt 폐곡선을 측정하였고 분석에 기초하여 개방형 유전체 구조에 적합하도록 구동파형이 수정되었다.

• Elastomers and Composites
• /
• 제21권3호
• /
• pp.205-212
• /
• 1986

The dielectric properties of natural rubber are very important to investigate the molecular structure. The charcteristics of the dielectric absorption in aging natural rubber were studied in the range of frequency from $1{\times}10^3Hz\;to\;3.2{\times}10^7Hz$ at the temperature of $23^{\circ}C$. As the results, it has been confirmed that in the case of aged NR vulcanized specimen with contained sulfur 2 phr above the specimens exhibit two kind of dielectic losses due to the the dipole polarization by impurities and sulfurs, and of raw rubber exhibit the kind of losses due the to dipole polarization. Particularly, it has been affirmed that the dielectric loss spectrum of the aging natural rubber is larger than that the natural rubber, and the dielectric strength of the aging natural rubber drop depreciate respctively.

• 한국전자파학회논문지
• /
• 제23권6호
• /
• pp.691-699
• /
• 2012

본 논문에서는 유전체 공진기와 마이크로스트립 라인 간의 결합 구조를 개선시켜 저위상 잡음을 갖는 전압제어 유전체 공진기 발진기(Vt-DRO: Voltage-tuned Dielectric Resonator Oscillator)를 설계, 제작하였다. 설계된 발진기는 유전체 공진기, 위상천이기, 증폭기로 구성된다. 발진기의 위상 잡음은 공진기의 군지연과 밀접하게 관계되며, 이러한 관계를 수식적으로 도출하고, 이를 예측하는 방법을 제안하였다. 유전체 공진기와 마이크로스트립 라인간의 결합 구조를 조정하여 약 53 nsec의 높은 군지연을 갖도록 설계하였다. 각 부의 측정은 측정의 편의성을 위해 웨이퍼 프로브를 이용하였으며, 이를 위하여 각 부의 입출력 포트를 CPW(Coplanar Waveguide)로 설계하였다. 각 부를 연결하여 측정한 S-파라미터는 개루프 발진 조건을 만족하였다. 설계된 개루프의 입출력을 연결하고 폐루프로 구성하여 전압 제어 유전체 공진기 발진기를 구현하였다. 측정 결과, 5.3 GHz의 발진 주파수에서 위상 잡음은 수식으로부터 도출한 값과 근사한, 100 kHz offset 주파수에서 -132.7 dBc/Hz를 얻었다. 이때 출력 전력은 약 4.5 dBm, 전기적 주파수 조정 범위는 0~10 V의 조정 전압에서 약 5 MHz를 보였다. PFTN-FOM(Power Frequency Tuning Normalized Figure of Merit)은 약 -31 dB를 보였다.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.156-161
• /
• 2006

Impedance spectroscopy was applied to the initial hydration of calcium phosphate bone cements in order to investigate the electrical/dielectric properties. Hydration or equivalently setting was monitored as a function of the amount of water and initial powder characteristics. Higher amounts of water produced more open microstructures, leading to higher conductivity and enhanced dielectric constant. The effects of the initial characteristics in the powder were investigated using bone cement powder prepared with and without granulation. Granulated powder exhibited a significant change in resistance and produced a higher dielectric constant than those of conventional powder. Through a simplified modeling, the effects of thickness in reaction products and pore sizes were estimated by the frequency-dependent impedance measurements. Furthermore, impedance spectroscopy was proven to be a highly reliable tool for evaluating the continuous change in pore structure occurring in calcium phosphate bone cements.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.309-310
• /
• 2005

Generally, the dielectric constant and loss tangent are gotten by resonators. This paper presents analysis of the comparing the dielectric constant and loss tangent from the Ring, T and series gap structures. The T structure can be analyzed easily at wideband characteristic with simple design. the Ring can ignore the radiation loss from the open-ended effect. the Series gap can get more accurate permittivity than a Ring structure. The Used materials were dupont9599 LTCC ceramic and daeju0086 Ag.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.325-344
• /
• 2017

The present paper investigates the propagation of Love-type wave in a composite structure comprised of imperfectly bonded piezoelectric layer with lower fiber-reinforced half-space with rectangular shaped irregularity at the common interface. Closed-form expression of phase velocity of Love-type wave propagating in the composite structure has been deduced analytically for electrically open and short conditions. Some special cases of the problem have also been studied. It has been found that the obtained results are in well-agreement to the Classical Love wave equation. Significant effects of various parameters viz. irregularity parameter, flexibility imperfectness parameter and viscoelastic imperfectness parameter associated with complex common interface, dielectric constant and piezoelectric coefficient on phase velocity of Love-type wave has been reported. Numerical computations and graphical illustrations have been carried out to demonstrate the deduced results for various cases. Moreover, comparative study has been performed to unravel the effects of the presence of reinforcement and piezoelectricity in the composite structure and also to analyze the existence of irregularity and imperfectness at the common interface of composite structure in context of the present problem which serves as a salient feature of the present study.

• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.341-358
• /
• 2018

This present study investigates Love-type wave propagation in composite structure consists of a loosely bonded functionally graded piezoelectric material (FGPM) stratum lying over a functionally graded initially-stressed fibre-reinforced material (FGIFM) substrate. The closed-form expressions of the dispersion relation have been obtained analytically for both the cases of electrically open and electrically short conditions. Some special cases of the problem have also been studied and the obtained results are found in well-agreement with the classical Love wave equation. The emphatic influence of wave number, bonding parameter associated with bonding of stratum with substrate of the composite structure, piezoelectric coefficient as well as dielectric constant of the piezoelectric stratum, horizontal initial stresses, and functional gradedness of the composite structure on the phase velocity of Love-type wave has been reported and illustrated through numerical computation along with graphical demonstration in both the cases of electrically open and electrically short condition for the reinforced and reinforced-free composite structure. Comparative study has been carried out to analyze the distinct cases associated with functional gradedness of the composite structure and also various cases which reveals the influence of piezoelectricity, reinforcement and horizontal initial stress acting in the composite structure, and bonding of the stratum and substrate of the composite structure in context of the present problem which serves as one of the major highlights of the study.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.354-361
• /
• 2008

The dielectric characteristics of low-k interlayer dielectric materials was fabricated by plasma enhanced chemical vapor deposition (PECVD). BTMSM precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1sccm step in the constant flow rate of 60 sccm $O_2$ in process chamber. Manufactured samples are analyzed components by measuring FT/IR absorption lines. Decomposition each Microscopic structures through two-dimensional correlation analysis about mechanisms for the formation of SiOCH in $SiOCH_3$, Si-O-Si and Si-$CH_3$ bonding group and analyzed correlation between the micro-structure of each group. It is a tendency that seems to be growing of Si-O-Ci(C) bonding group and narrowing of Si-O-$CH_3$ bonding group relative to the increasing flow-rate BTMSM. The order of changing sensitivity about changes of flow-rate in Si-O-Si(C) bonding group is cross link mode$(1050cm^{-1})$ $\rightarrow$ open link mode$(1100cm^{-1})\rightarrow$ cage link mode $(1140cm^{-1})$.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.314-319
• /
• 2015

The conventional geometry of a plate microstrip resonator is made up of a single metallic patch, which is printed on a monolayer dielectric substrate. Its arrangement is simple and easy to make, but it is limited in its functional abilities. Many searches have been realized to improve the bandwidth and the gain of the microstrip resonators. Among the various configurations proposed in the open literature, the stacked geometry seems to be very promising. By appropriate design, it is able to provide the operation in dual frequency mode, wide bandwidth enough and high gain. The theoretical investigations of structures composed of two stacked anti-reflection coatings, enhanced metallic coatings are available in the literature, however, for the stacked configurations involving three metallic coatings or more, not to exact or approximate analysis was conducted due to the complexity of the structure.