• 제목/요약/키워드: Open circuit

검색결과 1,163건 처리시간 0.023초

식염수에서 내식성 성능에 대한 Al 와이어의 5%Mg 합금 효과 (Effect of 5%Mg alloying in Al wire on corrosion resistance performance in saline solution)

  • 싱 지텐드라 쿠마르;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 봄 학술논문 발표대회
    • /
    • pp.93-94
    • /
    • 2022
  • The presence of chloride (Cl-) ions in environments causes localized corrosion resulting decrease the durability of the structures. In this study, 5% Mg containing Al alloys (Al-5Mg) wire used vis-à-vis compared its corrosion resistance with pure Al in 3.5wt.% NaCl solution with exposure periods. Initially both wires exhibited identical open circuit potential (OCP) attributed to the presence of native oxide film on the surface but with the exposure periods it shifted towards active direction owing to the dissolution of oxide film. The pure Al continuously shifted the OCP towards active direction while Al-5Mg shows stabilization of OCP after 8 days of exposure. The OCP of Al-5Mg is slightly higher compared to pure Al wire owing to the activeness of Mg. The total impedance of the Al-5Mg alloy is almost three times greater than pure Al with exposure periods in 3.5 wt.% NaCl solution. It might be formation of Al-Mg LDH (layered double hydroxide) thin film onto the surface.

  • PDF

PCB 구리 에칭 용액의 에칭 특성에 대한 전기화학적 고찰 (Electrochemical Evaluation of Etching Characteristics of Copper Etchant in PCB Etching)

  • 이서향;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제29권4호
    • /
    • pp.77-82
    • /
    • 2022
  • PCB 기판의 구리 식각 시 전기도금된 배선과 기지층의 전도층은 다른 에칭 특성을 가지며 이로 인한 배선의 과에칭과 배선기저부의 언터컷 현상이 보고되고 있다. 본 연구에서는 구리 에칭의 조성 변화에 따른 구리 에칭 특성에 대하여 연구하였다. 분극법과 OCV (open circuit voltage)를 이용하여 에칭액의 전기도금 구리와 기지층 구리의 최적 과산화수소와 황산의 농도를 얻었다. OCV와 ZRA (zero resistance ammeter)분석법을 이용하여 억제재의 효과를 비교하였다. 구리배선과 기지층간의 갈바닉 전류를 ZRA 방법을 이용하여 측정 비교하였다. 갈바닉 전류를 최소화하는 억제재를 ZRA를 이용한 갈바닉 쌍으로부터 선택할 수 있었다.

Investigation of Fault-Mode Behaviors of Matrix Converters

  • Kwak, Sang-Shin
    • Journal of Power Electronics
    • /
    • 제9권6호
    • /
    • pp.949-959
    • /
    • 2009
  • This paper presents a systematic investigation of the fault-mode behaviors of matrix converter systems. Knowledge about converter behaviors after fault occurrence is important from the standpoint of reliable system design, protection and fault-tolerant control. Converter behaviors have been, in detail, examined with both qualitative and quantitative approaches for key fault types, such as switch open-circuited faults and switch short-circuited faults. Investigating the fault-mode behaviors of matrix converters reveals that converter operation with switch short-circuited faults leads to overvoltage stresses as well as overcurrent stresses on other healthy switching components. On the other hand, switch open-circuited faults only result in overvoltage to other switching components. This study can be used to predict fault-mode converter behaviors and determine additional stresses on remaining power circuit components under fault-mode operations.

폐회로 디젤엔진의 연소특성에 관한 고찰 (An Investigation on Combustion Characteristics of The Closed Cycle Diesel Engine)

  • 박신배
    • 한국자동차공학회논문집
    • /
    • 제8권6호
    • /
    • pp.60-69
    • /
    • 2000
  • In order to obtain underwater or underground power sources, the closed cycle diesel engine is operated in the non air-breathing circuit system where the major species of the working fluid include oxygen, argon, and recycled exhaust gas. In the present study, the closed cycle diesel engine is designed to operate at the intake pressure between 2 and 3 bar. For operating in the open-cycle and closed-cycle situations, experimental apparatus using this diesel engine is made with ACAP as data acquisition system. In open, semi-open, and closed cycle modes, the predicted p-$\theta$ and P-V are compared with load bank power. Computation have been performed for wide range of major experimental parameters such as the specific fuel and oxygen concentrations, fuel conversion efficiency and polytropic exponent, IMEP and maximum cylinder pressure.

  • PDF

개방형 친밀도 스위칭 컨버터의 개발 (Development of Open Frame Type High Density Switching Converter)

  • 오용승;김희일;김희준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.171-173
    • /
    • 2002
  • This paper describes the open frame type high power density switching converter. It is based on active clamp forward converter with synchronous rectifier, and packaged by using the open frame and multi-layer printed circuit board (PCB) techniques to achieve the high power density. Furthermore, windings of transformer and inductor are also realized by multi-layer PCB so that it achieves the higher power density. Through the experiment on the proto-type converter of 50[W], it is confirmed that power density of $50[W/in^3]$ and maximum efficiency of over 91 [%] are obtained.

  • PDF

Split Slant-End Stubs for the Design of Broadband Efficient Power Amplifiers

  • Park, Youngcheol;Kang, Taeggu
    • Journal of electromagnetic engineering and science
    • /
    • 제16권1호
    • /
    • pp.52-56
    • /
    • 2016
  • This paper suggests a class-F power amplifier with split open-end stubs to provide a broadband high-efficiency operation. These stubs are designed to have wide bandwidth by splitting wide open-end stubs into narrower stubs connected in shunt in an output matching network for class-F operation. In contrast to conventional wideband class-F designs, which theoretically need a large number of matching lines, this method requires fewer transmission lines, resulting in a compact circuit implementation. In addition, the open-end stubs are designed with slant ends to achieve additional wide bandwidth. To verify the suggested design, a 10-W class-F power amplifier operating at 1.7 GHz was implemented using a commercial GaN transistor. The measurement results showed a peak drain efficiency of 82.1% and 750 MHz of bandwidth for an efficiency higher than 63%. Additionally, the maximum output power was 14.45 W at 1.7 GHz.

개폐루프 교대방식에 의한 주파수합성기의 설계 (The Design of Frequency Synthesizer by Open and Closed Loop Alternation Method)

  • 김익상;한영열
    • 한국통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.124-132
    • /
    • 1987
  • 본 논문에서는 주파수 도약시 천이상태에서 발생하는 주파수의 오차를 없애기 위하여 새로운 형태의 개폐루프 교대 주파수합성기를 개발하였다. 본 주파수합성기는 단일 위상비교기(PC), 두 개의 저역통과여파기(LPF), 두 개의 전압제어발진기(VCO), 스윗칭소자, 가변분주기 및 주파수도약제어기로 구성되어 있으며 스윗칭 동작에 의해 안정된 출력주파수를 얻게 된다. 아울러 본 주파수합성기의 회로구성상 개루프에서 외부회로의 인가가 용이할 것으로 생각된다.

  • PDF

Open Circuit Fault Diagnosis Using Stator Resistance Variation for Permanent Magnet Synchronous Motor Drives

  • Park, Byoung-Gun;Kim, Rae-Young;Hyun, Dong-Seok
    • Journal of Power Electronics
    • /
    • 제13권6호
    • /
    • pp.985-990
    • /
    • 2013
  • This paper proposes a novel fault diagnosis scheme using parameter estimation of the stator resistance, especially in the case of the open-phase faults of PMSM drives. The stator resistance of PMSMs can be estimated by the recursive least square (RLS) algorithm in real time. Fault diagnosis is achieved by analyzing the estimated stator resistance of each phase according to the fault condition. The proposed fault diagnosis scheme is implemented without any extra devices. Moreover, the estimated parameter information can be used to improve the control performance. The feasibility of the proposed fault diagnosis scheme is verified by simulation and experimental results.

OTA 만을 이용한 전압제어 증폭기의 설계 (A study on the design of voltage controlled Amplifier using only OTA)

  • 이영훈
    • 한국컴퓨터정보학회논문지
    • /
    • 제6권4호
    • /
    • pp.125-130
    • /
    • 2001
  • 이 논문에서는 2개의 OTA를 이용하여 전압제어 이득을 갖는 증폭기의 설계에 대하여 연구하였다. 이를 위하여 먼저 선형동작을 할 수 있는 OTA를 설계하였으며, 설계된OTA 2개를 이용하여 증폭기를 구성하였다. 이 설계에서 OTA는 open-loop로 사용되었다. 컴퓨터 시뮬레이션 결과 설계된 OTA와 증폭기의 특성은 이론 값과 매우 잘 일치하였다. 또한 이 회로는 선형성이 우수하며 저잡음 광대역 증폭기로 동작시킬 수 있다.

  • PDF

탭 선로의 새로운 등가 회로를 이용한 결합 선로 대역 통과 필터 설계 (Design of Coupled-line Band-pass Filter Using New Equivalent Circuit of Tapped-line)

  • 이일우;한승현;윤태순;권성수;홍태의;이종철
    • 한국ITS학회:학술대회논문집
    • /
    • 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
    • /
    • pp.187-190
    • /
    • 2006
  • 본 논문에서는 높은 커플링 값을 필요로 하는 대역 통과 필터의 입력부에 응용되는 탭 선로의 등가회로를 제시하였고, 그 변수 값을 수식적으로 제시한다. 탭 선로의 등가 회로는 개방형 스터브와 부가적인 전송 선로를 나타내어지며, 개방형 스터브와 전송 선로의 전기적 길이는 공진기의 선로 임피던스와 임버터 값으로 구할 수 있다. 이러한 탭 선로의 새로운 등가 회로는 간단한 방법으로 탭 선로를 이용한 필터 설계를 가능하게 하며 이론적으로 근접한 결과를 얻을 수 있게 한다. 새로운 탭 선로의 등가회로를 이용한 결합 선로 대역 통과 필터는 중심 주파수 5.8 GHz 에서 1.97 dB의 삽입 손실과 18.5 dB의 반사 손길 특성을 나타낸다.

  • PDF