• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.39-44
• /
• 2013

This study evaluated the effect of fluid flow on the power density in a horizontal-flow microbial fuel cell (MFC). The maximum power densities in four types of flow induced by different channel types in the anode chamber were investigated. The fluid flow at each channel was analyzed using tracer tests. Results of polarization curves showed that the maximum power densities of case 1, 2, 3 and 4 were 95.7, 129.1, 190.9 and 114.2 mW/m2, respectively. Case 3 with a set of guide walls where flow had an S type-like shape showed the highest power density. Based on the Morrill Dispersion Index (MDI) value of case 4, microbial activity would be enhanced since the reactor allows even distribution of substrate but the overflow occurrence would not guarantee stable performance. Therefore, case 3 could be an effective reactor type for MFC because of high electricity generation and stable performance.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.1
• /
• pp.13-29
• /
• 2021

A 3-D hydrodynamic model is applied in the Han River Estuary system, Gyeonggi Bay, to understand the mechanisms of salt transport. The model run is conducted for 245 days (January 20 to September 20, 2020), including dry and wet seasons. The reproducibility of the model about variation of current velocity and salinity is validated by comparing model results with observation data. The salt transport (FS) is calculated for the northern and southern part of Yeomha channel where salt exchange is active. To analyze the mechanisms of salt transport, FS is decomposed into three components, i.e. advective salt transport derived from river flow (QfS0), diffusive salt transport due to lateral and vertical shear velocity (FE), and tidal oscillatory salt transport due to phase lag between current velocity and salinity (FT). According to the monthly average salt transport, the salt in both dry and wet seasons enters through the southern channel of Ganghwa-do by FT. On the other hand, the salt exits through the eastern channel of Yeongjong-do by QfS0. The salt at Han River Estuary enters towards the upper Han River by FT in dry season, whereas that exits to the open sea by QfS0 in wet season. As a result, mechanisms of salt transport in the Han River Estuary depend on the interaction between QfS0 causing transport to open sea and FT causing transport to the upper Han River.

• Water for future
• /
• v.29 no.6
• /
• pp.141-154
• /
• 1996

A computer program is developed in order to investigate the fluid flow and heat ransfer of a water body in a 2-D vertical rectangular coordinate. The specific purpose of this study is to obtain a physical insight of several fluid flow problems which occur in a lake and the water and wastewater treatment facility like a primary clarifier. The performance of computer program developed is successfully evaluated by the comparison of other two experimental and computational data in open literature : the first comparison is made against the numerical data associated with the cooling water discharge and the other is numerical and experimental works for the primary clarifier of Sarina City at Ontario. Further, the computer program is applied to investigate the feature of lake flow, say lake turnover, and 2-D vertical channel flow in terms of temperature, wind velocity and flow rate, etc. The computational results appear to be physically acceptable and consistent. The computer program developed in this study shows the possibility of the viable tool to figure out the flow characteristics of water reservoir.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.3 s.147
• /
• pp.294-303
• /
• 2006

A surface piercing propeller (SPP) in tunnel has been proposed recently as a new propulsion system for a high speed air cavity ship. The purpose of the present study is to investigate the characteristics of the SPP in tunnel through a series of model tests. A model propulsion system is placed on a dummy body made of Acrylics. The tunnel is divided into two regions by a guide vane extending from the inlet to the center of the propeller shaft. Air has been supplied from an air nozzle placed at the bottom of the dummy body and the changes in propeller performances caused by the air flow are investigated. The measurements are done for open water and in-tunnel conditions, both for fully and partially submerged propeller. The influence of the guide vane configurations on the propeller performance is also studied. The experiments are performed at the variable pressure circulation water channel of Inha University

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.89-95
• /
• 2011

In this study, We modeled the deck house of the container ship like the representative bluff body and made the model ship. By using the PIV technique, the exhaust gas anti-reflux effect of the deck house backward according to open and close of the Sunken Deck and installation of the deflector in deck house side were measured in circulating water channel. The experiment system consists of hi-speed camera, laser, image board, host computer. The mean velocity vector and time mean axial velocity were found in deck house backward and the results were compared each case.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.137-147
• /
• 2008

The relative magnitudes of the individual terms of the momentum equation are analyzed and compared by analytical methods. The temporal variations of each term are analyzed for the influence factors to runoff expressed by the parameters of the momentum equation, stream slopes and roughness coefficients. The magnitudes of local acceleration and convective acceleration offset each other. The peak time of each term except the gravity term coincides with inflection point of the hydrograph rising limb each other. The magnitudes of each term vary with the channel characteristics, especially when the roughness coefficients are dominant or for the mild stream slopes the pressure term can not be negligible.

• Water for future
• /
• v.29 no.2
• /
• pp.199-207
• /
• 1996

To evaluate the usage of $\kappa-\imath$ turbulence closure for the analysis of thermal discharge behavior, a two-dimensional depth-integrated numerical model is developed. The developed model is applied to a steady flow in an open channel with simle geometry and the numerical results agree well with existing experimental data. The adequate simulation of recirculation, reattachment, and excess temperature rise at downstream of the outlet in the channel attributes to the correct calculation of turbulent eddy viscosity and diffusivity by $\kappa-\imath$ turbulence model. For an accurate prediction of thermal discharge behavior, the introduction of buoyancy production term, the modification of source/sink, and the correct input of turbulence constants of the $\kappa-\imath$ turbulence model are required.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.107-117
• /
• 2007

A surface piercing propeller (SPP) in tunnel has been proposed recently as a new propulsion system for a high speed air cavity ship. The purpose of the present study is to investigate the characteristics of the SPP in tunnel through a series of model tests. A model propulsion system is placed on a dummy body made of Acrylics. The tunnel is divided into two regions by a guide vane extending from the inlet to the center of the propeller shaft. Air has been supplied from an air nozzle placed at the bottom of the dummy body and the changes in propeller performances caused by the air flow are investigated. The measurements are done for open water and in-tunnel conditions, both for fully and partially submerged propeller. The influence of the guide vane configurations on the propeller performance is also studied. The experiments are performed at the variable pressure circulation water channel of Inha University.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1990

Experimental studies oil the density currents were made in order to investigate their hydraulic conditions in the estuary. Interfacial forms in the flow direction became sharply with increasing densimetric Froude number in the estuary which arrested saline wedge exists. Interfacial thicknesses were almost constant in the open channel, while they abruptly increased out of channel and they also decreased as overall Richardson number increases. Densimetric Froude number of river mouth showed that it was not necessarily 1.0 and varies with the upper layer thickness. On the other hand, water level there tended to increase with increasing relative densities. It is observed in the Sumjin River Estuary that a strong density front has been formed between freshwater and ocean waters.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.113-121
• /
• 2013

In this paper, simulations were carried out to determine the efficiency of the rotation efficiency according to the draft of waterwheel in open rectangular channel. In the small hydroelectric generators to get the highest efficiency of waterwheel is very important. But the presence of various elements(free water surface flow, non-uniform velocity distribution because of the waterways wall friction etc) makes it difficult to create a mathematical formula. In this paper, we made a scale model and perform a physical simulation where the draft, gradient and flux is variable. Scale modelling with 10-step draft, 3-step gradients and 2-step flux, as well were constructed then computerized automatic experimental system were configured to acquire the rotational efficiency vs. draft of itself. Rotational efficiency is analyzed as for the draft of waterwheel using the acquired data by varying the gradient and flux of canal. Reviewing the analyzed data, it is confirmed that phenomena of efficiency shown at previous and present experiment is similar and revealed that computerized system shows more sophisticated numerical figures.