• Geomechanics and Engineering
• /
• v.35 no.6
• /
• pp.581-591
• /
• 2023

North Anatolian Fault Zone is tectonically active with recent earthquakes (Mw7.6 1999-Kocaeli and Mw7.2 1999-Düzce earthquakes) and it passes through Marmara region, which is highly industrialized, densely populated and economically important part of Turkey. Many power plants, located in Marmara region, are exposed to high seismic hazard. In this study, open source OpenQuake software has been used for the probabilistic earthquake hazard analysis of Marmara region and risk assessment for the specified energy facility. The SHARE project seismic zonation model has been used in the analysis with the regional sources, NGA GMPEs and site model logic trees. The earthquake hazard results have been compared with the former and existing earthquake resistant design regulations in Turkey, TSC 2007 and TBSCD 2018. In the scope of the study, the seismic hazard assessment for a typical natural gas combined cycle power plant located in Marmara region has been achieved. The seismic risk assessment has been accomplished for a typical control building located in the power plant using obtained seismic hazard results. The structural and non-structural fragility functions and a consequence model have been used in the seismic risk assessment. Based on the seismic hazard level with a 2% probability of exceedance in 50 years, considered for especially these type of critical structures, the ratios of structural and non-structural loss to the total building cost were obtained as 8.8% and 45.7%, respectively. The results of the study enable the practical seismic risk assessment of the critical facility located on different regions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.50-56
• /
• 2011

To meet the NOx limit without a penalty of fuel consumption, Urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, map based open loop control for urea injection was developed and assessed in the European Transient Cycle (ETC) for heavy duty diesel engine. The basic urea quantity set-value which was calculated using the look up tables of engine out NOx, exhaust flow rate and optimum NSR resulted in NOx reduction of 80% and the average $NH_3$ slip of 24 ppm and maximum of 79 ppm. In order to reduce $NH_3$ slip, $NH_3$ storage control algorithm was applied to correct the basic urea quantity and reduced $NH_3$ slip levels to the average 15 ppm and maximum 49 ppm while keeping NOx reduction of 76%. With high and increasing SCR temperature, the $NH_3$ storage capacity decreases, which leads to $NH_3$ slip. The resulting $NH_3$ slip peak can be avoided by stopping or significantly reducing the urea injection during the SCR temperature gradient is over $30^{\circ}C/min$.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.6
• /
• pp.267-272
• /
• 2016

Microscope cell image is an important indicator for obtaining the biological information in a bio-informatics fields. Since human observers have been examining the cell image with microscope, a lot of time and high concentration are required to analyze cell images. Furthermore, It is difficult for the human eye to quantify objectively features in cell images. In this study, we developed HCS algorithm for automatic analysis of cell image using an OpenCV library. HCS algorithm contains the cell image preprocessing, cell counting, cell cycle and mitotic index analysis algorithm. We used human cancer cell (MKN-28) obtained by the confocal laser microscope for image analysis. We compare the value of cell counting to imageJ and to a professional observer to evaluate our algorithm performance. The experimental results showed that the average accuracy of our algorithm is 99.7%.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.3
• /
• pp.97-105
• /
• 2021

Most of the rural development projects for the welfare of residents are mainly new construction and remodeling projects for community buildings such as village halls and senior citizens. However, in the case of the construction industry, it has been studied that 23% of the total carbon dioxide emissions generated in Korea are generated in the building-related sector. (GGIC, 2015) In order to reduce the emission of environmental pollutants resulting from construction of rural community buildings, there is a need to establish a system for rural buildings by predicting the environmental impact. As a result of this study, the emissions of air pollutants from buildings in rural communities were analyzed by dividing into seven stages: material production, construction, operation, maintenance, demolition, recycling, and transportation activities related to disposal. As a result, 12 kg of carbon dioxide (CO), 0.06 kg of carbon monoxide (CO), 0.02 kg of methane (CH), 0.04 kg of nitrogen oxides (NO), 0.02 kg of sulfurous acid gas (SO), and non-methane volatile organics per 1m of buildings in rural communities It was analyzed that 0.02 kg of compound (NMVOC) and 0.00011 kg of nitrous oxide (NO) were released. This study proved that environmentally friendly design is possible with a quantitative methodology for the comparison of operating energy and air pollutant emissions through the design specification change based on the statement of the rural community building. It is considered that it can function as basic data for further research by collecting major structural changes and materials of rural community buildings.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2014

PURPOSES : The purpose of this study is to evaluate moisture susceptibility of a dense graded and an open graded asphalt mixtures by the method of AASHTO T-283. METHODS : To simulate moisture damage of asphalt pavements with continuously rainfall during summer rainy season, the dense graded and the open graded asphalt mixtures were immersed in water for 15 days and were measured the weight and the change of strength. Also, the mixtures were performed five freeze-thaw cycles to simulate moisture damage of the mixtures by freeze-thaw during winter and were measured the change of strength. The degradation characteristics model was used to analyze the relationship between strength and moisture damage. RESULTS : According to the results, the dense graded and the open graded asphalt mixtures were shown in the similar trends of the strength changes by immersion time and freeze-thaw cycle. However, the moisture damage reduction of open graded asphalt mixture was more sensitive in early phase than that of dense graded asphalt mixture.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.2
• /
• pp.92-103
• /
• 2011

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. A Building Information Modeling (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. building SMART has developed Industry Foundation Classes (IFC) standard for interoperability of BIM based information. Several software tools are already IFC-compliant. However, there are a lot of problems related to efficient interoperability of software owing to the lack of guide regarding the software usage and insufficiency IFC interfaces of software. The purpose of this study is to suggest efficient IFC support interface development methodologies of existing IFC certified software. The scope of this study is interoperability test for open BIM based quality assurance. To achieve this purpose, the authors have classified subject of open BIM based quality assurance and investigated IFC certification process and certified software. In addition, the authors have exported and imported via IFC files using different IFC interfaces in the software for interoperability of architectural objects and their properties. Finally, the authors have suggested IFC support interface development methodologies and hereafter direction for efficient interoperability of IFC certified software based on open BIM.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.2
• /
• pp.121-128
• /
• 2016

The mechanical jointing method is very important in the machine parts and structure. They are used by the bolts and rivet because it is very convenient to replace the parts and the structure. However, the mechanical jointing methods using the bolt and rivet needed the open hole. The machine parts life cycle is reduced because this open hole created the stress concentration. Therefore, the measurement methods are needed to evaluate phenomenon of the stress concentration. This paper discusses the development of the measurement algorithm using the digital image correlation methods to measure the strain distribution of the open hole. To implement the measurement algorithm using the DIC, the LabVIEW 2010 programming tool was used. To measure the strain distribution of the open hole, the tensile specimens having an open hole are made by using the aluminum 6061-T6. To secure the reliability of measurement result using the DIC, the DIC measurement results and FEM analysis results were compared.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.162-178
• /
• 2015

Petroleum based fossil fuels used to power most processes today are non-renewable fuels. This means that once used, they cannot be reproduced for a very long time. The maximum combustion of fossil fuels occurs in automobiles i.e. the vehicles we drive every day. Thus, there is a requirement to shift from these non-renenewable sources of energy to sources that are renewable and environment friendly. This is causing the need to shift towards more environmentally-sustainable transport fuels, preferably derived from biomass, such as biodiesel blends. These blends can be made from oils that are available in abundance or as waste e.g. waste cooking oil, animal fat, oil from seeds, oil from algae etc. Waste Cooking Oil(WCO) is a waste product and so, converting it into a transportation fuel is considered highly environmentally sustainable. Keeping this in mind, a life cycle assessment (LCA) was performed to evaluate the environmental implications of replacing diesel fuel with WCO biodiesel blends in a regular Diesel engine. This study uses Life Cycle Assessment (LCA) to determine the environmental outcomes of biodiesel from WCO in terms of global warming potential, life cycle energy efficiency (LCEE) and fossil energy ratio (FER) using the life cycle inventory and the openLCA software, version 1.3.4: 2007 - 2013 GreenDelta. This study resulted in the conclusion that the biodiesel production process from WCO in particular is more environmentally sustainable as compared to the preparation of diesel from raw oil, also taking into account the combustion products that are released into the atmosphere as exhaust emissions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.159-162
• /
• 2008

In this study, various cycles of liquid rocket engines were surveyed and specifically gas generator after burning cycle was investigated for upper stage motors. The engines for the upper stage can be categorized into three group based on the cycles and propellants at the diagram. Kerosene engines which adapt the gas generator after burning cycle and are located in the region II, are characterized for high combustion pressure and complexity. This cycle usually needs more than two pumps to use the turbine power efficiently. The fuel line can be divided into the gas generator line and the combustor line, and only the gas generator line is need to be pressured more because the combustion pressure in the gas generator is much higher than that of the combustor. Basically, all the oxidizer goes into the gas generator and than to the combustor, thus the auxiliary LOx pump is not critically necessary. However, for the various reasons, the LOx line requires a booster pump. A gas generator after burning cycle engines produces relatively high specific impuls than that of the open cycle engines. Thus it is suitable for upper stages of launch vehicles.

• Information Systems Review
• /
• v.19 no.1
• /
• pp.169-183
• /
• 2017

As global competition is heating up and product life cycle has been rapidly shortened, each company pursues a variety of competitive technology innovations through different means of innovation. In this study, we assume that open innovation can be a shift motive of the technology innovation paradigm of small and medium enterprises (SMEs) being beyond the limitations of R&D within a company. We analyze the process and content of open innovation and performance. In addition, we identify the problems generated in the open innovation process and analyze the ways to strengthen open innovation. This study is based on the investigations into the technological competitiveness of local SMEs. The innovation ecosystem is analyzed from the perspective of product/service innovation, organizational innovation, and marketing innovation. Situational analysis is presented on the relationship between the innovation capabilities of information and communication technology SMEs and innovation performance.