• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.40-45
• /
• 2008

In this paper, the exact analysis of the parallel coupled line with open stub and an application to branch-line hybrid are presented. The Z-parameter of the parallel coupled line with an open stub is derived. The structure shows the characteristics as a lowpass filter unit cell(LUC) with wide stop band. Using the characteristics we designed a miniaturized branch-line hybrid with wide harmonic-suppressed band. The size of the new branch-line hybrid is a half of the conventional branch-line hybrid. The frequency response is the same with that of the conventional one near 1.7 GHz center frequency. Including the fifth harmonics, up to 12 GHz spurious responses are suppressed below to -20dB.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.5
• /
• pp.413-421
• /
• 2001

An impaired smooth muscle cell (SMC) relaxation of coronary artery by alteration of $K^+$ channels would be the most potential explanation for reduced coronary reserve in left ventricular hypertrophy (LVH), however, this possibility has not been investigated. We performed morphometrical analysis of the coronary artery under electron microscopy and measured $Ca^{2+}-activated\;K\;(K_{Ca})$ currents and delayed rectifier K $(K_{dr})$ currents by whole-cell and inside-out patch-clamp technique in single coronary arterial SMCs from rabbits subjected to isoprenaline-induced cardiac hypertrophy. Coronary arterial SMCs underwent significant changes in ultrastructure. The unitary current amplitude and the open-state probability of $K_{Ca}$ channel were significantly reduced in hypertrophy without open-time and closed-time kinetic. The concentration-response curve of $K_{Ca}$ channel to $Ca^{2+}$ is shifted to the right in hypertrophy. The reduction in the mean single channel current and increase in the open channel noise of $K_{Ca}$ channel by TEA were more sensitive in hypertrophy. $K_{dr}$ current density is significantly reduced in hypertrophy without activation and inactivation kinetics. The sensitivity of $K_{dr}$ current on 4-AP is significantly increased in hypertrophy. This is the first study to report evidence for alterations of $K_{Ca}$ channels and $K_{dr}$ channels in coronary SMCs with LVH. The findings may provide some insight into mechanism of the reduced coronary reserve in LVH.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.8
• /
• pp.1403-1406
• /
• 2007

An antiproliferative agent, streptochlorin, was isolated from the fermentation broth of a marine actinomycete isolated from marine sediment. Phylogenetic analysis of the 16S rRNA gene sequence indicated that the strain belongs to the genus Streptomyces. Bioactivity guided fractionation of the culture extract by solvent partitioning, ODS open flash chromatography, and reversed-phase HPLC gave a pure compound, streptochlorin. Its structure was elucidated by extensive 2D NMR and mass spectral analyses. Streptochlorin exhibited significant antiproliferative activity against human cultured cell lines.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.89-94
• /
• 2002

n general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank, is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, may introduce air into pump, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. Uneven flow distribution can also increase or decrease the power consumption with a change in total developed head. To avoid these sump problems pump station designers are considered intake structure dimensions, such as approaching upstream, baffle size, sump width, width of pump cell and so on. From this background, flow characteristics of intake within sump are investigated numerically to obtain the optimal sump design data. The sump model is designed in accordance with HI code.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.597-600
• /
• 2002

In general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank, is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, may introduce air into pump, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. Uneven flow distribution can also increase or decrease the power consumption with a change in total developed head. To avoid these sump problems pump station designers are considered intake structure dimensions, such as approaching upstream, baffle size, sump width, width of pump cell and so on. From this background, flow characteristics of intake within sump are Investigated numerically to obtain the optimal sump design data. The sump model is designed in accordance with HI code.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.91-92
• /
• 2006

Metallic foams have a combination of attractive properties such as high specific mechanical properties and good energy absorption characteristics. This paper presents the properties of steel foam sandwiches produced using powder metallurgy approach. Metallic powder, solid polymeric binder and a foaming agent are dry-mixed and molded into the desired shape. The molded powder mix is then heat-treated to foam, debind and sinter the material. The resulting material has an open cell structure with high porosity. The structure and properties of sandwiches specimens produced with the process are presented and discussed.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.37-43
• /
• 2011

In this paper, the optimized doping condition of crystalline silicon solar cells with $156{\times}156\;mm^2$ area was studied. To optimize the drive-in temperature in the doping process, the other conditions except variable drive-in temperature were fixed. These conditions were obtained in previous studies. After etching$7\;{\mu}m$ of the surface to form the pyramidal structure, the silicon nitride deposited by the PECVD had 75~80nm thickness and 2 to 2.1 for a refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$850^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Drive-in temperature was changed in range of $830^{\circ}C$ to $890^{\circ}C$to obtain the sheet resistance $30{\sim}70\;{\Omega}/{\box}$ with $10\;\Omega}/{\box}$ intervals. Solar cell made in $890^{\circ}C$ as the drive-in temperature revealed 17.1% conversion efficiency which is best in this study. This solar cells showed $34.4\;mA/cm^2$ of the current density, 627 mV of the open circuit voltage and 79.3% of the fill factor.

• Solar Energy
• /
• v.17 no.1
• /
• pp.59-66
• /
• 1997

The solar cell electrical output parameters such as the open circuit voltage($V_{oc}$) and short circuit current density($V_{sc}$) are intrinsic characteristics depending on junction depth, doping concentration, metal contacts barriers and cell structure. As a role of thumb for solar cell design, the metal contact barriers for phosphorus doped emitter should have lower work function in order to provide lower series resistance. The fabrication of PESC(passivated emitter solar cell) structure usually involves the use of titanium as a metal contact barrier. Chromium, which work function is similar to titanium but conductance is higher than titanium is being investigated as the new metal contact barrier. Although titanium has lower work function difference than chromium, the electric performances of chromium as contact barrier are higher than titanium. This better performance is attributed to the lower resistivity from chromium. This paper, therefore, compares the attributes of metal barrier contacts using titanium and chromium.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.62-70
• /
• 1984

N+NPP+ HLEBSF (high low emitter back surface field) solar cells which have N+N high low junction in the emitter as well as N+PP+ BSF cells were designed and fabricated by using <111> oriented P type Si wafers with the resistivity of 10$\Omega$/$\textrm{cm}^2$ and the thickness of 13-15 mil. Physical parameters (impurity concentration, thickness) at each region of N+PP+ and N+NPP+ cell were made equally through same masks and simultaneous process except N region of HLEBSF cell to investigate the high low emitter junction effect for efficiency improvement. Under the light intensity of 100 mW/$\textrm{cm}^2$, total area (active area) conversion efficiency were typically 10.94% (12.16%) for N+PP+ BSF cells and 12.07% (13.41%) for N+N PP+ cells. Efficiency improvement of N+NPP+ cell which has high low emitter Junction structure is resulted from the suppression of emitter recombination current and the increasement of open circuit voltage (Voc) and short circuit current (Ish) by removing heavy doping effects occurring in N+ emitter region.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.1
• /
• pp.99-123
• /
• 2010

We develop Open Innovation Analysis Method in the Patent analysis field and applies it to analyze Deagu-Gyung-buk Cases. After Chesbrough researches the open innovation situation about U. S. company Cases, many researchers began to study about Open Innovation of Companies. And Hippel participated in User Innovation research about Medical equipments and extreme sporting equipments. He pointed out that user innovation occurred new products. I call it User based Open Innovation. But the methods for Open Innovation are limited such as Case study, Survey analysis, and Quality study. So, we need to develop objective analysis method for open innovation of any firm. In this study, we want to develop new objective analysis method for open innovation and apply it to analyze rocal cases and global comparative studies. We will develop the Chesbrough's patent analysis method about open innovation.We apply this new open innovation analysis method to analyze medical equipment and fuel cell industries in Daegu and Gyung-buk Province. faembedded structure of the cooperative research network of innovation We also will apply this method to analyze Samsung and Nokia Mobile industry, and Hyundae and Toyota automobile industry.