• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1397-1405
• /
• 2009

In recent decades, exergy analysis has been holding spotlight as a useful tool in the design, assessment, optimization, and improvement of energy system. This paper presents the results of the energy and exergy analysis of a steam turbine cogeneration system for industrial complex using two efficiency concepts of conventional one and exergetic one. In order to obtain the destroyed exergy of each component, mathematical analysis is conducted by using exergy balance and the second law of thermodynamics, according as the parameters are changed, such as the ratio of returned process steam, process steam supplied, temperature and pressure of boiler and power. The computer program developed in this study can determine the efficiencies and exergy destroyed at each component of cogeneration system. As a result of this study, a component having the largest destroyed exergy was boiler. And closed and opened feedwater heater had the lowest one. The affects to the cogeneration system due to the variation of process steam flow and return rate of condensed water is shown that the total electric power efficiency(${\eta}_E$) is decreased as increasing the return rate of condensed water under constant process steam flow. As the boiler pressure is increased for the more production of electricity, the efficiency of cogeneration system was decreased.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.519-527
• /
• 2014

An integrated multi-beam satellite and multi-cell terrestrial system is an attractive means for highly efficient communication due to the fact that the two components (satellite and terrestrial) make the most of each other's resources. In this paper, a terrestrial component reuses a satellite's resources under the control of the satellite's network management system. This allows the resource allocation for the satellite and terrestrial components to be coordinated to optimize spectral efficiency and increase overall system capacity. In such a system, the satellite resources reused in the terrestrial component may bring about severe interference, which is one of the main factors affecting system capacity. Under this consideration, the objective of this paper is to achieve an optimized resource allocation in both components in such a way as to minimize any resulting inter-component interference. The objective of the proposed scheme is to mitigate this inter-component interference by optimizing the total transmission power - the result of which can lead to an increase in capacity. The simulation results in this paper illustrate that the proposed scheme affords a more energy-efficient system to be implemented, compared to a conventional power management scheme, by allocating the bandwidth uniformly regardless of the amount of interference or traffic demand.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.243-250
• /
• 2002

This paper considers the problem of estimating parameters of the bivariate exponential distribution with a location parameter for a two-component shared parallel system using component data from system-level life test terminated at the time of the prespecified number of system failure. In the system-level life testing, there are three patterns of failure types ; 1) both component failed 2) both component censored 3) one is failed and the other is censored. In the third case, we assume that the failure time might be known or unknown. The maximum likelihood estimators are obtained for the case of known/unknown failure time when the other component is censored.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.484-484
• /
• 2001

The sophistication of current software applications results in the increasing cost fur software development time. The component-based software development framework is proposed to overcome the difficulty and time-consuming requirements by modularity and reusability. As is the general software case, a component-based simulation framework encourages the reusability of the real system model based on the modularity of the applied simulation methodology. This paper presents a component-based simulation environment that is based on the DEVS/COM run-time infrastructure. The DEVS (Discrete Event System Specification) formalism provides a formal modeling and simulation framework for the generic dynamic systems [1] and Microsoft's COM (Component Object Model) is one of the strongest competitor fur the component standard. The reusability by the DEVS/COM simulation environment saves model development time remarkably and component technology make simulator itself to be a subparts of real application.

• Journal of Microbiology
• /
• v.38 no.2
• /
• pp.113-116
• /
• 2000

Escherichia coli F plasmid partition apparatus is composed of two trans-acting proteins (SopA and SopB) and one cis-acting DNA sequence (sopC). The SopB-sopC complex has been suggested to serve a centromere-like function through its interaction with chromosomally encoded proteins which remain to be identified. In this paper, we are introducing a new yeast 1.5-hybrid system which assembles the two-hybrid and one-hybrid system as a mean to find and additional component of the F plasmid partition system, interacting with DNA (sopC)-bound SopB protein. The results indicates that this system is a promising one, capable of selecting an interacting component.

• IE interfaces
• /
• v.22 no.3
• /
• pp.214-222
• /
• 2009

In the early design stage, system reliability must be estimated from life testing data at the component level. Previously, a point estimate of system reliability was obtained from the unbiased estimate of the component reliability after assuming that the number of failed components for a given time followed a binomial distribution. For deriving the confidence interval of system reliability, either the lognormal distribution or the normal approximation of the binomial distribution was assumed for the estimator of system reliability. In this paper, a new estimator is used for the component level reliability, which is biased but has a smaller mean square error than the previous one. We propose to use the beta distribution rather than the lognormal or approximated normal distribution for developing the confidence interval of the system reliability. A numerical example based on Monte Carlo simulation illustrates advantages of the proposed approach over the previous approach.

• Journal of the Korean Society for Railway
• /
• v.9 no.1 s.32
• /
• pp.18-22
• /
• 2006

The dynamic characteristics of the current collection system are investigated by conducting a test run in which signals from accelerometers and load cells attached to the various parts of the pantograph are analyzed in both the time and frequency domains. The dynamic characteristics of the current collection system are found to be strongly influenced by the train speed; the fluctuation in the pantograph motion increases in direct proportion to the train speed. There exist two major fequency components in the pantograph motion related to the current collection, a speed-dependent component arising from the train traversing a span of the catenary, and a speed-independent component related to the pantograph resonant frequency. The train acceleration is also found to exert strong influence on the current collection system characteristics. The effect of the train motion is found to be stronger on the speed-dependent frequency component than on the speed-independent one.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.57-64
• /
• 2000

For composing the structure model of national maritime power system by system structural modeling, in this study, the 50 basic factors are selected by survey of the extensive and through literatures on maritime, sea, maritime power and sea power. And the basic factors are classified into 36 component factors by cluster method. The 9 attributes are extracted by the application of the principle component analysis method, one of the factor analysis method in system engineering, to component factors. In this study, we define the attributes composing the national maritime power system by integrating the result of this study and existed our studies relating to this topic. Which are showed in Table 2. and we show the structure model of national maritime power system in Fig. 3. In Table 2, the 9 attributes are as follows : the fundamental power of maritime, shipping and port power, naval power, fishing power, shipbuilding power, the power of ocean research and development, dependency on seaborne trade, the protection power of ocean environment and the will and inclination of govemment. Also, in the case of evaluating this system, we conform the importance of considering the interactions among the attributes which have strong interactions in structure model of national maritime power system.

• The Journal of Information Systems
• /
• v.12 no.1
• /
• pp.87-116
• /
• 2003

One of the important applications for business-to-business electronic commerce is in procurement and inventory management using electronic data interchange(EDI). Using online catalogs and approved supplier lists, firms can easily create requisitions and purchasing documents. The emerging trend in EDI technology is changed from VAN(Value Added Network) based EDI to XML based EDI. This paper intends to suggest a component-based XML/EDI system using Unified Modeling Language(UML), as an application system for automobile part industry. Applying component based XML/EDI systems designed with UML methodology, we analyzed the workflow and the document on procurement process between trading partners and implemented a prototype of efficient XML/EDI system, as a surrogate of existing VAN/EDI. The result of applying object-oriented CBD(Component Based Development) technique is to minimize the risk of life cycle and facilitate the reuse of software as mentioned to limitation of information engineering methodology. It enables the interoperability with corporate legacy systems such as ERP(Enterprise Resource Planning), SCM(Supply Chain Management). This system proposes a solution to apply analysis phase and design phase in implementation of XML/EDI system. The implementation of XML/EDI system using CBD shows the ease of use in software reuse and the interoperability with corporate internal information system. The purchasing department with XML/EDI system can electronically communicate purchase orders, delivery schedules to external suppliers and interoperate with other application systems.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.138-147
• /
• 2017

As the functions and structure of the system are complicated and elaborated, various types of structures are emerging to increase reliability in order to cope with a system requiring higher reliability. Among these, standby systems with standby components for each major component are mainly used in aircraft or power plants requiring high reliability. In this study, we consider a standby system with a multi-functional standby component in which one standby component simultaneously performs the functions of several major components. The structure of a parallel system with multifunctional standby components can also be seen in real aircraft hydraulic pump systems and is very efficient in terms of weight, space, and cost as compared to a basic standby system. All components of the system have complete operation, complete failure, only two states, and the system has multiple states depending on the state of the component. At this time, the multi-functional standby component is assumed to be in a non-operating standby state (Cold Standby) when the main component fails. In addition, the failure rate of each part follows the Weibull distribution which can be expressed as increasing type, constant type, and decreasing type according to the shape parameter. If the Weibull distribution is used, it can be applied to various environments in a realistic manner compared to the exponential distribution that can be reflected only when the failure rate is constant. In this paper, Markov chain analysis method is applied to evaluate the reliability of multi-functional multi-state standby system. In order to verify the validity of the reliability, a graph was generated by applying arbitrary shape parameters and scale parameter values through Excel. In order to analyze the effect of multi-functional multi-state standby system using Weibull distribution, we compared the reliability based on the most basic parallel system and the standby system.