• 제목/요약/키워드: On-line performance monitor

검색결과 74건 처리시간 0.028초

JaNeC을 위한 온라인 성능감시기의 설계 및 구현 (The Design and Implementation of On-Line Performance Monitor for JaNeC)

  • 김명호;김남훈;최재영
    • 정보처리학회논문지A
    • /
    • 제9A권4호
    • /
    • pp.563-572
    • /
    • 2002
  • 성능감시기는 분산처리 환경에서 프로그램의 성능을 추적하고 평가하기 위해 필수적인 것이다. 성능감시기는 출력방법에 따라 오프라인과 온라인으로 나눌 수 있다. 오프라인성능감시기는 프로그램이 종료된 후에 그 성능을 분석하는 것이고, 온라인 성능감시기는 프로그램의 수행 중에 분석하는 것이다. 따라서 프로그램의 빠른 분석과 디버깅을 위해서는 온라인 기능이 필수적이다. JaNeC은 Java로 구현된 분산처리 환경으로 이를 위한 오프라인성능감시기가 포함되어 있다. 그러나 이 성능감시기로는 JaNeC에서 수행되는 프로그램을 효율적으로 분석할 수 없다. 따라서, 본 논문에서는 JaNeCe에서 수행되는 프로그램의 빠른 분석과 디버깅을 위해 온라인 성능감시기를 설계하고 구현하는 것에 대해서 설명한다. 이 온라인 성능감시기는 분석하고자 하는 프로그램에 영향을 최소화하도록 설계되었으며, 효율적인 프로그램 분석을 위해 다양한 형태의 그래픽 출력을 제공한다. 또한 프로그램이 종료된 이후에도 다시 분석할 수 있도록 하기 위해 오프라인 성능감시기와의 인터페이스도 제공한다.

SPAX 병렬 컴퓨터에서의 온라인 무간섭 네트워크 성능 감시기 (An on-line non-invasive network monitor for the SPAX parallel computer)

  • 이승구
    • 전자공학회논문지C
    • /
    • 제34C권6호
    • /
    • pp.44-50
    • /
    • 1997
  • This paper describes the design and test of an on-line non-invasive network performance monitor (hardware portion) for the SPAX parallel computer. The SPAX parallel computer supports up to 256 intel P6 processors with 4 P6 processors constituting a processign node. The nodes are interconnected with a dual two-level crossbar network calle dXcent-net. Since the performance of the SPAX parallel computer is highly dependent on the proper and efficient operation of the network, an on-line non-invasive network performance monitor (with hardware components) has been developed to aid in the monitoring and tunign of the Xcent-net. Successful testing of a prototype node monitor board and PC interface system shows that our monitor design provides a low-cost practical solution to this problem.

  • PDF

네트워크 컴퓨터를 위한 자바 기반의 성능감시기 (A Java-based Performance Monitor for Networked Computer)

  • 김봉준;김동호;황석찬;김명호;최재영
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제27권2호
    • /
    • pp.160-168
    • /
    • 2000
  • 본 논문에서는 네트워크 컴퓨터를 이용하여 병렬 프로그래밍 환경에서 수행되는 프로그램의 성능을 추적하고 평가하기 위한 온라인/일괄처리-사건/시간 기반형 성능 감시기를 제안한다. 본 논문의 JaNeC 성능 감시기는 자바로 구현되어 있으므로 이기종 컴퓨터사이의 시스템 이식성이 뛰어나며, 웹 기반의 그래픽 콘솔을 제공하여 사용자에게 친숙한 인터페이스를 제공한다. 본 논문에서 제시한 성능 감시기는 사용자가 프로그램 실행시에 발생한 이벤트를 보다 쉽게 분석할 수 있도록 태스크나 이벤트를 선택할 수 있는 필터 기능과 TimeLine, Task View, Task History, Message Passing View, Host CPU View 기능 등으로 구성되어 있다.

  • PDF

Development of On-line Performance Diagnostic Program of a Helicopter Turboshaft Engine

  • Kong, Chang-Duk;Koo, Young-Ju;Kho, Seong-Hee;Ryu, Hye-Ok
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제10권2호
    • /
    • pp.34-42
    • /
    • 2009
  • Gas turbine performance diagnostics is a method for detecting, isolating and quantifying faults in gas turbine gas path components. On-line precise fault diagnosis can promote greatly reliability and availability of gas turbine in real time operation. This work proposes a GUI-type on-line diagnostic program using SIMULINK and Fuzzy-Neuro algorithms for a helicopter turboshaft engine. During development of the diagnostic program, a look-up table type base performance module are used for reducing computer calculating time and a signal generation module for simulating real time performance data. This program is composed of the on-line condition monitoring program to monitor on-line measuring performance condition, the fuzzy inference system to isolate the faults from measuring data and the neural network to quantify the isolated faults. Evaluation of the proposed on-line diagnostic program is performed through application to the helicopter engine health monitoring.

MPM을 이용한 고압전동기 운전중 상태 평가 (On-Line Assessment of High Voltage Motor Condition using the Motor Performance Monitor)

  • 김희동;공태식
    • 전기학회논문지
    • /
    • 제57권9호
    • /
    • pp.1589-1593
    • /
    • 2008
  • The condition of a high voltage motor was monitored with the motor performance monitor (MPM) at the motor control center. The MPM detected defects in the rotor bar and end ring and input power according to motor and load conditions. The assessment of the condition of a coal pulverizer motor indicated it was clearly in good condition in terms of the rotor bars, over voltage, and motor performance. However, the side bands at frequency, 56.48 Hz indicated existence of rotor end-ring fault. The large torque ripple indicated abnormal operating conditions. After visual inspection, it has been observed that an impeller blade of the circulating water pump was broken off causing the irregular torque pattern.

TP 모니터를 이용한 계정계 업무 분산 시스템 구축 (Implementation of a Distributed System for Banking Accounting with the TP monitor)

  • 이성주;최완규;나영남
    • 한국정보처리학회논문지
    • /
    • 제4권11호
    • /
    • pp.2651-2661
    • /
    • 1997
  • DBMS을 이용한 온라인 트랜잭션 처리 시스템에 비해 TP 모니터를 부가하여 사용할 경우 시스템의 성능이 증가한다. 아울러 이러한 TP 모니터를 이용한 OLTP 시스템 구축이 늘어가고 있는 실정이다. TP 모니터를 이용할 때 고려해야 할 점들이 많으나 기본적으로 트랜잭션의 ACID외에 빠른 응답 시간과 확장성에 초점을 맞춰 TP 모니터를 적용하여 분산 시스템을 구현 하였다. 본 논문에서는 분산 시스템에 의한 다운 사이징을 구현하고 그 성능을 검증한다.

  • PDF

생활공감정책의 운영성과와 발전방안 (Performance and Development of Life Sympathy Policy)

  • 조석주;박종관
    • 한국콘텐츠학회논문지
    • /
    • 제11권12호
    • /
    • pp.753-763
    • /
    • 2011
  • 본 연구는 생활공감정책 추진 및 운영의 성과와 문제점들을 분석하고 그 활성화 방안을 제시하는 데 목적이 있다. 이를 위하여 문헌연구, 실증조사 등을 병행 하였다. 분석결과 생활공감정책의 문제점은 담당부서의 혼재로 인한 혼란, 홍보 부족, 주부모니터단의 정체성 부족 및 지속성의 불확실, 주부모니터단에 대한 통일된 운영지침 부재, 주부모니터단 활동 및 운영에 대한 평가 부족 등이다. 생활공감정책을 활성화시키기 위해서는 제도적 측면 및 운영적 측면의 활성화가 필요하다. 먼저 제도적 측면의 활성화 과제는 관련법의 정비, 조직의 강화, 담당 인력강화, 모티터단 참여범위 확대 등이다. 운영적 측면의 개선방안으로는 정책의 통합성 연계성 강화, 정책의 평가 및 환류기능 강화, 생활공감정책의 활성화 환경조성, On-line을 통한 운영시스템 강화 등이 필요하다. 이 부문의 활성화를 통해 주부들의 아이디어를 정책에 활용과 더불어 정부정책에 주부들이 참여 활성화는 21세기 한국의 발전에 많은 공헌을 할 수 있을 것이다.

유도형 리니어모터 성능의 온$\cdot$라인 모니터링을 위한 가상계측시스템 구현 (Realization of a virtual Instrumentation system for On-Line LIM Performance Monitoring)

  • 장석명;이성호;장건우;정상섭
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제50권5호
    • /
    • pp.205-213
    • /
    • 2001
  • This paper presents a virtual instrumentation(VI) system for LIMs performance on-line monitoring. The VI is designed using the graphical programming language LabVIEW and is capable of performing on-line measurement functions, including data acquisition, display, and analyses in the time and frequency domains, as well as data archiving. To monitor in real time the steady-state and transient electromagnetic thrust of LIMs, the search coil is used for the determination of the flux linkage components, which is then multiplied by the appropriate current components to yield a signal proportional to the electromagnetic thrust. This paper reports the LIM's dynamics measured by the proposed on-line monitoring system.

  • PDF

저압상태에서 공기역학적 렌즈를 이용한 In-Situ Particle Monitor의 성능특성 분석 (Investigation of the Performance Characteristics of an In-Situ Particle Monitor at Low Pressures Using Aerodynamic Lenses)

  • 배귀남
    • 대한기계학회논문집B
    • /
    • 제24권10호
    • /
    • pp.1359-1367
    • /
    • 2000
  • In-situ particle monitors(ISPMs) are widely used for monitoring contaminant particles in vacuum-based semiconductor manufacturing equipment. In the present research, the performance of a Particle Measuring Systems(PMS) Vaculaz-2 ISPM at low pressures has been studied. We generated the uniform sized methylene blue particle beams using three identical aerodynamic lenses in the center of the vacuum line, and measured the detection efficiency of the ISPM. The effects of particle size, particle concentration, mass flow rate, system pressure, and arrangement of aerodynamic lenses on the detection efficiency of the ISPM were examined. Results show that the detection efficiency of the ISPM greatly depends on the mass flow rate, and the particle Stokes number. We also found that the optimum Stokes number ranges from 0.4 to 1.9 for the experimental conditions.

적외선 광학계통 성능평가를 위한 간섭계 개발 (Development of Interferometer for Performance Assessment of IR Optical System)

  • 홍경희;고재준;이성태;장세안;오명호
    • 한국광학회지
    • /
    • 제2권4호
    • /
    • pp.179-185
    • /
    • 1991
  • 적외선 광원으로 $CO_2$ 레이저를 사용하였고 광속을 2.5 cm의 직경으로 확대하여 Twyman-Green 간섭계를 구성하였다. 각종 렌즈는 Ge 렌즈로, 광속분리기는 ZnSe 평행판으로 택하였다. Pyro-electric vidicon camera에 의해 CRT monitor에 간섭무늬를 제시하며 image card에 의해 digitize되고 PC로 강도분포가 입력되어 data처리된다. 여기서, 적외선 간섭무늬는 thermal paper 상에 기록하였다. 가시영역에서는 He-Nefp이저를 광원으로 하고 CCD 카메라로 검출하여 CRT monitor에 제시하였다. 파면수차함수, PSF, OTF가 계산되어 3차원 그래프로 제시되며 프린트 된다.

  • PDF