• 한국생활과학회지
• /
• 제16권5호
• /
• pp.969-977
• /
• 2007

The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1217-1228
• /
• 2014

A method for faulted line detection of four parallel lines on the same tower is presented, based on four-summing and double-differential sequences of one terminal current. Four-summing and double-differential sequences of fault current can be calculated using a certain transformation matrix for parameter decoupling of four parallel transmission lines. According to fault boundary conditions, the amplitude and phase characteristics of four-summing and double-differential sequences of fault current is studied under conditions of different types of fault. Through the analysis of the relationship of terminal current and fault current, a novel methodology for fault line detection of four parallel transmission line on the same tower is put forward, which can pick out the fault lines no matter the fault occurs in single line or cross double lines. Simulation results validate that the methodology is correct and reliable under conditions of different load currents, transient resistances and fault locations.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.731-739
• /
• 2004

As the life styles have been changed in modern society and sports gave been emphasized for spending spare time and improving health condition, sports are regarded to lave a leading role to fashion as one of the prominent factors. This study is to analyze the gender-identity and how different levels of involvement in In-line skating affects clothing interests. 291 In-line skaters ranged in age from middle twenties to middle thirties were surveyed and measured for this study. MANOVA(multivariate analysis of variance), ANOVA(univariate analysis of variance), Cronbach ${\alpha}$ reliability, t-test, and correlation analysis were performed with SPSS 10.0 program on the selected data. The results of this study are as follow. There were no obvious differences in In-line skating clothing interests by gender of In-line skaters. There were, however, differences in the reasons for In-line skating, the hours to skate per week. Those whose purpose for skating was diet had more interest in style focused on expression. In case of skating for health, they showed interest in activity-functionality style and anti-deviation style. The group of In-line skaters who skated 15 to 18 per week gave more interest in activity-functionality style out of the clothing interest-factors. Those who had strong masculinity in gender-identity of In-line skaters were more involved in In-line skating. There were some differences in clothing interests according to gender-identity of In-line skaters. In regard of In-line skating clothing interest by involvement in In-line skating, those who had higher involvement in In-line skating had higher In-line skating clothing interest.

• 한국생활과학회지
• /
• 제18권5호
• /
• pp.1063-1075
• /
• 2009

This study intends to provide foundational data for enhancing the welfare of customers purchasing digital products through analyzing the notes from written on-line reviews. The data used for the analysis are 6,342 on-line reviews for cell phones and digital cameras released from November, 2007 until April, 2008, which was posted on Naver Knowledge Shopping from November, 2007 until June, 2008. Through the on-line reviews, this article analyzed the evaluations on the digital products' hardware, software, design, service, price, and other criteria and the customers' emotional experience in the process of purchase, use, and possession. According to the results of the analysis, negative evaluation and emotional experience were originated from the company's information provision methods and purchase process. In addition, insufficient information searches in the process of online purchases, consumers' low right consciousness, and impolite on-line reviews were also problematic. Customers' evaluations and emotional experiences on digital products were conducted in a complex way. Based on that, this research makes suggestions in the company's marketing, customer education, and theoretical aspect.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.86-92
• /
• 2021

As interest and demand for high value-added industries, including the global automobile and aerospace industries, have increased recently, demand for line centers with excellent performance that can respond to the production system for producing high value-added products is also rapidly increasing. A line center improves productivity based on the installed area using a multi-spindle compared to a conventional machining center. However, as the number of spindles increases, the weight increases and results in structural problems owing to the heat and vibration generated by each spindle. Therefore, it is necessary to improve machining precision through the structural improvement of the line center. This study presents research on the stabilization design of the line center through structural stability analysis through structural analysis to develop a compact multi-axis line center. An optimization model of the line center has been proposed to improve the processing precision and increase the rigidity by performing weight reduction based on the structural analysis results.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.216-222
• /
• 2012

This paper presents a single-pole eight-throw switch, based on an eight-way power divider, using substrate integrate waveguide(SIW) technology. Eight sectorial-lines are formed by inserting radial slot-lines on the top plate of SIW power divider. Each sectorial-line can be controlled independently with high level of isolation. The switching is accomplished by altering the capacitance of the varactor on the line, which causes different input impedances to be seen at a central probe to each sectorial line. The proposed structure works as a switching circuit and an eight-way power divider depending on the bias condition. The change in resonant frequency and input impedance are estimated by adapting a tapered transmission line model. The detailed design, fabrication, and measurement are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.537-539
• /
• 1998

In this paper, we construct the on-line model structure for the nonlinear process systems using the adaptive fuzzy-neural network. Adaptive fuzzy-neural network usually consists of two distinct modifiable structure, with both, the premise and the consequent part. These two parts can be adapted by different optimization methods, which are the hybrid learning procedure combining gradient descent method and least square method. To achieve the on-line model structure, we use the recursive least square method for the consequent parameter identification of nonlinear process. We design the interface between PLC and main computer, and construct the monitoring and control simulator for the nonlinear process. The proposed on-line modeling to real process is carried out to obtain the effective and accurate results.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.85-90
• /
• 2010

In this paper the effects of a Static Synchronous Series Compensator, which is constructed with a 48-pulse inverter, on the power demand from the grid are studied. Extensive simulation studies were carried out in the MATLAB simulation environment to observe the compensation achieved by the SSSC and its effects on the line voltage, line current, phase angle and real/reactive power. The designed device is simulated in a power system which is comprised of a three phase power source, a transmission line, line inductance and load. The system parameters such as line voltage, line current, reactive power Q and real power P transmissions are observed both when the SSSC is connected to and disconnected from the power system. The motivation for modeling a SSSC from a multi-pulse inverter is to enhance the voltage waveform of the device and this is observed in the total harmonic distortion (THD) analysis performed at the end of the paper. According to the results, the power flow and phase angle can be controlled successfully by the new device through voltage injection. Finally a THD analysis is performed to see the harmonics content. The effect on the quality of the line voltage and current is acceptable according to international standards.

• 한국콘텐츠학회논문지
• /
• 제9권10호
• /
• pp.492-499
• /
• 2009

본 연구는 학습자의 효과적 학습을 위해 온라인 상 콘텐츠 품질을 구성하는 요소와 오프라인 강의가 콘텐츠 품질을 인식하는데 얼마나 영향을 주는가를 알아보기 위한 연구이다. 다속성 태도모델(multiattribute attitude model)의 속성만족도-중요도 모델(attribute satisfaction-importance model)을 중심으로 온라인 학습에 있어 콘텐츠 품질이 학습태도에 미치는 영향과 오프라인 강의를 병행했을 때의 학습태도(learning attitude) 형성의 변화에 대한 관계를 살펴보고자 한다. 콘텐츠 만족도에 대한 신념(belief)은 콘텐츠 품질을 구성하는 요소로 음성강의, 동영상강의, WBI방식 강의로 나누어 평가한다. 여기에 웹상의 강의와 오프라인 강의를 병행했을 때 형성되는 학습태도의 변화에 대해 연구한다.

• Applied Microscopy
• /
• 제50권
• /
• pp.27.1-27.6
• /
• 2020

Transition metal dichalcogenides (TMD), which is composed of a transition metal atom and chalcogen ion atoms, usually form vacancies based on the knock-on threshold of each atom. In particular, when electron beam is irradiated on a monolayer TMD such as MoS₂ and WS₂, S vacancies are formed preferentially, and they are aligned linearly to constitute line defects. And then, a hole is formed at the point where the successively formed line defects collide, and metal clusters are also formed at the edge of the hole. This study reports a process in which the line defects formed in a monolayer WS₂ sheet expends into holes. Here, the process in which the W cluster, which always occurs at the edge of the formed hole, goes through a uniform intermediate phase is explained based on the line defects and the formation behavior of the hole. Further investigation confirms the atomic structure of the intermediate phase using annular dark field scanning transition electron microscopy (ADF-STEM) and image simulation.