• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.56-59
• /
• 1997

The recent machine tools are requested so high-quality processing and productivity increasing. Therefore it is so necessary to develop technology for high-speed and high-precision. This thesis touches on the development of high speed and intellectual line center. At first, the line center is necessary that strong structure, compact structure an light weight design for high-speed processing and transfer. So. It is necessary that examination of new materials and structures for light-weight and control devices for precision processing. So. it si going to make mention of the process of 1st model production for the above-mentioned base on test model production and evaluation.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.251-255
• /
• 2003

In this paper, a miniaturized directional coupler utilizing lumped element is proposed as a interdigital capacitor. The traditional miniaturization technique of transmission line realized a utilizing MIM(Metal-Insulator-Metal) capacitor on CPW(Coplanar Waveguide). However, we present a simplified design procedure without additional manufacturing process utilizing interdigital capacitor on microstrip with ease of design. The similar characteristics between the conventional directional coupler with ${\lambda}/4$ transmission line and the miniaturized directional coupler with ${\lambda}/8$ transmission line are validated through simulation and measurement results. Miniaturization rate of total size is about 25% while coupled line is about 60%. As a result, this proposed directional coupler can reduce the size of mobile communication system at 2 GHz.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2293-2298
• /
• 2011

In this paper, A tag antenna structure for RFID application with resonant frequency of 920MHz is proposed using the meander line technique and Evolution Strategy. Miniaturization structure design for a tag antenna is performed by structure combining the half-wave dipole with a meander line. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is made for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The optimized tag antenna size is 63mm ${\times}$ 15mm ${\times}$ 1mm. And the proposed antenna is realized on FR-4 substrate (${\epsilon}_r=4.4$, $tna{\delta}=0.02$).

• 전자공학회논문지B
• /
• 제33B권12호
• /
• pp.31-44
• /
• 1996

Since optical delay line signal processing which utilizes optical fiber as delay line elements can provide high speed and broadband signal processing, the optical delay line signal processing has numerous applications. Recently, many research papers which optical delay line signal processing techniques are being applied to OCDMA are published. The author has published paper on the design method for optical fiber filters of lattice structure. However, the previous design method does not realize the transfer function all the time. It can be realized with constraints. In this paper, we propose the design method that can realize the transfer function all the time without any constraints for the optical fiber filter of lattice structure.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.153-156
• /
• 2002

In this paper, we have designed a small size lumped/distributed hybrid element directional coupler using parallel coupled-line theory. a hybrid lumped equivalent circuit for a conventional parallel directional coupler is proposed. The equivalent circuit and design formula for the presented lumped element coupler are derived based on the even- and odd-mode properties of a parallel-coupled line. By using the derived design formula, we have extracted design parameters and designed the 3㏈ and 10㏈ small size lumped element directional couplers at the center frequency of 2Ghz. Excellent agreements between design theory and simulation on the designed directional couplers show the validity of this paper.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.108-113
• /
• 2017

In this paper, we proposed a three-dimensional(3D) scanning system based on laser vision technique for 3D model reconstruction. The proposed scanning system consists of line laser, camera, and turntable. We implemented the 3D scanning system using low quality elements. Although these are low quality elements, we reduced the 3D data reconstruction errors greatly using two methods. First, we developed a maximum brightness detection algorithm. This algorithm extracts the maximum brightness of the line laser to obtain the shape of the object. Second, we designed a new laser control device. This device helps to adjust the relative position of the turntable and line laser. These two methods greatly reduce the measuring noise. As a result, point cloud data can be obtained without complicated calculations.

• 복식문화연구
• /
• 제4권3호
• /
• pp.373-381
• /
• 1996

Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.