• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.579-586
• /
• 2019

This work examined effects of the synthesis method and melamine content of melamine-urea-formaldehyde (MUF) resins on the bond-line features (i.e. resin penetration and bond-line thickness) in plywood. Two synthesis methods (MUF-A and MUF-B) and three melamine contents (5, 10, and 20%) were employed to prepare MUF resins. The MUF-A resins at three melamine contents were prepared by a simultaneous reaction of melamine, urea, and formaldehyde, while the MFU-B resins were prepared by reacting melamine at the same levels with formaldehyde followed by urea. The results showed that higher melamine content increased the viscosity of MUF-A and MUF-B resins. The resin penetration of MUF-A resins decreased by 48% while those of MUF-B resins increased by 16% at 20% melamine content. As a result, the MUF-A resins had greater bond-line thickness than those of MUF-B resins as the melamine content increased. The MUF-B resins resulted in thinner bond-line and greater resin penetration compared to those of MUF-A resins. The results suggested that MUF-B resins prepared with 20% melamine content had a proper combination of resin penetration and bond-line thickness that could produce plywood panel with a better adhesion performance.

• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.410-415
• /
• 2008

On-line monitoring of fresh tomato paste processing was done using two radio frequency (RF) sensors resonant at 85 and 110 MHz. Fresh tomato juice with soluble solid content of about $5^{\circ}Brix$ was evaporated up to $23^{\circ}Brix$ and diluted down to about $5^{\circ}Brix$ again with a pilot scale evaporator. The RF sensors were installed in a processing pipe and monitored. The pastes at a specific $^{\circ}Brix$ level were sampled and analyzed for physical properties such as soluble solid content and viscosity. The relationships between sensor outputs and measured physical properties were analyzed. Analysis results showed RF sensor is feasible to apply on-line monitoring of tomato paste processing.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1657-1668
• /
• 2006

The last few years have represented a boom for the online gaming industry. Internet-based online games have been an increasingly popular form of entertainment. The gaming industry estimates there will be over 26 million online gaming participants in 2002. The rapid development of online game content and related information technology will increase the size of the industry and have a profound impact on many aspects of our lives and our society. This paper develops the exploratory LISREL model for identifying the factors affecting the players' loyalty to a specific brand of online game. The concepts of flow, word of mouth, feedback, challenge, social norms, and online community activities, etc, are all introduced into the model, as the independent variables directly and indirectly affecting loyalty. Based on data collected from an online survey, the validity of the model has been tested and interesting conclusions have been developed concerning the relationships between loyalty and flow, word of mouth, and other independent variables. It is hoped that this result might provide useful guidelines for developing successful online game content.

• International Journal of Advanced Culture Technology
• /
• 제8권4호
• /
• pp.299-305
• /
• 2020

With the advancement of the 4th Industrial Revolution(4IR), microprocessor education is on the rise due to the explosive demand for IoT (Internet of Things) and M2M devices. However, it is difficult due to many constraints to efficiently transfer training on hardware assembly and implementation through online training. Thus, we developed a cost-effective online content based on Arduino simulations, Atmel Studio 7, and WinAvr simulator that are required for the utilization of AVR 128. These Camtasia videos overcame the limitation of theory focused on-line education by visually introducing the practical utilization of an actual AVR 128. In this paper, the proposed educational content was provided to university students, and the results of student feedback show that it has a strong effect.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.198-204
• /
• 2005

Seeds of neem were collected from different parts of India and analyzed for their azadirachtin content by High Performance Liquid Chromatography (HPLC). In order to assess the effects of genotypic and geographical variation on azadirachtin content in cell cultures, callus development was attempted in the seeds containing high and low concentration of azadirachtin. The concentration of azadirachtin in callus cultures was significantly affected by the explant source. Seed kernels with higher azadirachtin content produced higher azadirachtin content in callus cultures and lower azadirachtin content was seen in callus cultures produced from seed kernels with low azadirachtin content. The protocol for development of elite stock culture of Azadirachta indica was established with the objective of selecting a high azadirachtin-producing cell line. The highest azadirachtin-producing cell line was selected and the effects of different media and illumination conditions on growth and azadirachtin production were studied in shake flask suspension culture. Detailed batch growth kinetics was also established. These studies provided elite starter culture and associated protocols for cultivation of A. indica plant cell culture in the bioreactor.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.252-257
• /
• 2005

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation' orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line in injection-molded products is assessed. And the effects of fiber content and injection mold-gate conditions on the fiber orientation are also discussed.

• Imaging Science in Dentistry
• /
• 제34권3호
• /
• pp.137-144
• /
• 2004

Purpose: To investigate the effects of low dose irradiation on the calcium content and calcific nodule formation of the MC3T3-El osteoblastic cell line. Materials and Methods: Cells were irradiated with a single dose of 0.2, 0.4 and 0.6 Gy at a dose rate of 5.38 Gy/min using Cs-137 irradiator. After irradiation, the calcium content and calcific nodule formation were examined on the 1st, 2nd, 3rd and 4th week. Results: We did not find any significant difference of total calcium content after irradiation of 0.2, 0.4 and 0.6 Gy when compared with the unirradiated control group. There was no significant difference of total calcium content between 0.2, 0.4 and 0.6 Gy irradiated groups. We found an increased tendency of the calcific nodule formation after irradiation of 0.2, 0.4 and 0.6 Gy when compared with the unirradiated control group without significant difference of calcific nodule formation between 0.2, 0.4 and 0.6 Gy irradiated groups. Conclusion : The results showed an increased tendency of the calcific nodule formation after low dose irradiation. However, this tendency did not increase with the increase of irradiation dose.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.1115-1118
• /
• 2005

인터넷 기술이 발전함에 따라 이를 이용한 온라인 회의 시스템이 개발되고 있다. 현재의 온라인 회의 시스템은 문자, 음성, 화상 등과 같은 멀티미디어 기술을 도입하여 기존의 오프라인 회의와 달리 공간의 제약에서 벗어날 수 있다는 장점이 있기 때문에 많은 기업과 조직에 도입되고 있다. 하지만 온라인 회의 시스템은 회의 시간이 길어질수록 발언 내용이 많아지고 회의 내용에 대한 일관된 인식이 떨어지기 쉽다는 단점이 있다. 이에 본 논문에서는 온톨로지(Ontology) 개념을 도입하여 회의 내용을 지식화 하고 이를 XML(Extensible Markup Language)로 구조화하여 요약 및 관리 할 수 있는 회의 관리 시스템 아키텍처를 제시였다. 또한 이렇게 제시된 아키텍처의 객관적인 검증과 체계적이고 시각화된 관리를 위해 지식기반 회의 관리 시스템을 설계 및 구현하였다.

• Food Science and Biotechnology
• /
• 제14권2호
• /
• pp.280-285
• /
• 2005

Applicability of near infrared reflectance spectroscopy (NIRS) was examined for quality control of red pepper powder in milling factories. Prediction of chemical composition was performed using modified partial least square (MPLS) techniques. Analysis of total 51 and 21 red pepper powder samples by conventional methods for calibration and validation, respectively, revealed standard error of prediction (SEP) and correlation coefficient ($R^2$) of moisture content, ASTA color value, capsaicinoid content, and total sugar content were 0.55 and 0.90, 8.58 and 0.96, 31.60 and 0.65, and 1.82 and 0.86, respectively; SEP and $R^2$ were low and high, respectively, except for capsaicinoid content. The results indicate, with slight improvement, on-line quality measurement of red pepper powder with NIRS could be applied in red pepper milling factories.

• 보건행정학회지
• /
• 제12권2호
• /
• pp.92-114
• /
• 2002

While making a vigorous discussion about self-regulation for exponential growth of harmful health information on the Internet, many countries lave made various efforts to select and circulate high quality health information on the Internet. The purpose of this study Is to review the serf-regulation methods of health information on the Internet and to suggest quality control methods of health information on the Internet suitable for Korea. Self-regulation methods of the health information on the Internet include ‘content rating system(or content selection system)’, ‘codes of conduct or guideline’, ‘internet hot-line’, ‘education for information providers and consumers’. Any self-regulation method should be used with other methods. We can regulate health information on the Internet effectively by using both self-regulation methods and compulsive methods such as law. Also information providers, information consumers, specialists, consumer representatives, scholars, governments officers should take part in doing these efforts and make concern.