DOI QR코드

DOI QR Code

Feasibility of RF Sensor Application for On-line Monitoring of Tomato Paste Processing

토마토 패이스트 가공공정의 온라인 모니터링용 RF 센서의 활용 가능성

  • Kim, Seong-Min (Division of Bioresource Systems Engineering, Chonbuk National University) ;
  • Garvey, Casey (Quality & Innovation, ConAgra Foods, Inc.) ;
  • Leary, Thomas (Department of Chemical Engineering, University of California) ;
  • McCarthy, Michael (Department of Food Science & Technology University of California)
  • Published : 2008.12.25

Abstract

On-line monitoring of fresh tomato paste processing was done using two radio frequency (RF) sensors resonant at 85 and 110 MHz. Fresh tomato juice with soluble solid content of about $5^{\circ}Brix$ was evaporated up to $23^{\circ}Brix$ and diluted down to about $5^{\circ}Brix$ again with a pilot scale evaporator. The RF sensors were installed in a processing pipe and monitored. The pastes at a specific $^{\circ}Brix$ level were sampled and analyzed for physical properties such as soluble solid content and viscosity. The relationships between sensor outputs and measured physical properties were analyzed. Analysis results showed RF sensor is feasible to apply on-line monitoring of tomato paste processing.

Keywords

References

  1. Choi, Y. J., R. R. Milczarek, C. E. Fleck, T. C. Garvey, K. L. McCarthy and M. J. McCarthy. 2006. On-line monitoring of tomato concentrate physical properties during evaporation. Journal of Food Process Engineering 29:615-632 https://doi.org/10.1111/j.1745-4530.2006.00085.x
  2. Cullen, P. J., A. P. Duffy, C. P. O'Donnell and D. J. O'Callaghan. 2000. Process viscometry for the food industry. Trends in Food Science & Technology 11:451-457 https://doi.org/10.1016/S0924-2244(01)00034-6
  3. Datta, A. K., G. Sumnu and G. S. V. Raghavan. 2005. Dielectric properties of foods. In Engineering Properties of Foods, 3rd edition. CRC Press, Boca Raton, FL
  4. Haley, T. A. and R. S. Smith. 2003. Evaluation of in-line absorption photometry to predict consistency of concentrated tomato products. Lebensmittel-Wissenschaft Und-Technologie 36:159-164 https://doi.org/10.1016/S0023-6438(02)00218-9
  5. King, R. J., M. J. Werner and G. D. Mayorga. 1993. Microwave dynamic dielectric analysis of curing neat resins. Journal of Reinforced Plastics Composites 12:173-185 https://doi.org/10.1177/073168449301200204
  6. King, R. J., J. C. Basuel, M. J. Werner and K. V. King. 1996. Material characterization using microwave open reflection resonator sensors. In Microwave Aquametry. IEEE Press, New York, NY
  7. Nelson, S. O. and P. G. Bartley. 2002. Measuring frequencyand temperature-dependent permittivities of food materials. IEEE Transactions on Instrumentation and Measurement 51:589-592 https://doi.org/10.1109/TIM.2002.802244
  8. Nyfors, E. and P. Vainikainen. 1991. Industrial microwave sensors. IEEE Microwave Symposium Digest 3:1009-1012
  9. Ryynanen, S. 1994. The electromagnetic properties of food materials. Journal of Food Engineering 26:409-429
  10. Steffe, J. F. 1996. Rheological Methods in Food Process Engineering, 2nd edition. Freeman Press, East Lansing, MI