• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.583-587
• /
• 2015

In this study, a half-duplex mutual communication device via human skin was developed. Frequency-shift keying (FSK) digital modulation and demodulation control were used to transmit and receive data. Data communication through the human body is an effective communication technique and has high-grade security characteristics. In addition, making contact is a natural instinct of humans. Transmitting data through the human body is currently a highly conspicuous technology, because recently a lot of commercial sensors for humans have been developed. A body area network (BAN) can be easily constructed by this communication method on human skin. In this study, a half-duplex FSK mutual communication device was developed using a commercial FSK modulator and demodulator. A special control switching circuit and communication sequence were developed for mutual communication through human skin.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.455-462
• /
• 2011

This paper is about the design of a new gravity compensator for the lower body exo-skeleton device. The exo-skeleton devices is for increasing the torque of the human body joint for the purpose of helping the disabled, workers in the industry, and military soldiers. So far, most of studied exo-skeleton devices are actuated by the motors, but motors are limited in energy such that a short durability is always a big problem. In this paper, a new gravity compensator is proposed to reduce the torque load applied to human body joints due to gravity. The gravity compensator is designed using a tortional bar spring, and its structure and characteristics are studied through the test and computer simulation. A design concept on the exo-skeleton device using the gravity compensator is presented. An analysis and computer simulation on the torque reduction of the proposed exo-skeleton device that applies and non-applies the gravity compensator are performed.

• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.248-255
• /
• 2018

In this paper, a design for a vehicle body of an armored robot for complex disasters is described. The proposed design considers various requirements in complex disaster situations. Fire, explosion, and poisonous gas may occur simultaneously under those sites. Therefore, the armored robot needs a vehicle body that can protect people from falling objects, high temperature, and poisonous gas. In addition, it should provide intuitive control devices and realistic surrounding views to help the operator respond to emergent situations. To fulfill these requirements of the vehicle body, firstly, the frame was designed to withstand the impact of falling objects. Secondly, the positive pressure device and the cooling device were applied. Thirdly, a panoramic view was implemented that enables real-time observation of surroundings through a number of image sensors. Finally, the cockpit in the vehicle body was designed focused on the manipulability of the armored robot in disaster sites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.95-96
• /
• 2009

A fully depleted capacitorless 1-transistor dynamic random access memory (FD 1T-DRAM) based on a sSOI strained-silicon-on-insulator) wafer was investigated. The fabricated device showed excellent electrical characteristics of transistor such as low leakage current, low subthreshold swing, large on/off current ratio, and high electron mobility. The FD sSOI 1T-DRAM can be operated as memory device by the floating body effect when the substrate bias of -15 V is applied, and the FD sSOI 1T-DRAM showed large sensing margin and several milli seconds data retention time.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.107-112
• /
• 2005

In this study, the dynamic analysis is performed fur predicting the transmitted force to flexible human body induced by prototype HIF(High Impulsive force) device operation, which is partially assembled by major parts. A beam-mass model and a shear-structure model are used for the flexible mount structure and their dynamic behavior are investigated by experimental results under rigid/flexible mount conditions using a general purpose device. From the test result of prototype device in rigid mount condition, the transmitted force to human body which can not be measured directly, is estimated based on the proved mount structure model.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.99-106
• /
• 2019

In traditional Chinese medical (TCM) science, tongue images can be observed for medical diagnosis; however, the tongue diagnosis of TCM is influenced by the subjective factors of doctors, and the diagnosis results vary from person to person. Quantitative TCM tongue diagnosis can improve the accuracy of diagnosis and increase the application value. In this paper, digital image processing and pattern recognition technologies are employed on mobile device to classify tongue images collected in different health states. First, through grayscale integral projection processing, the trough is found to localize the tongue body. Then the tongue body image is transferred from RGB color space to HSV color space, and the average H and S values are considered as the color features. Finally, the diagnosis results are obtained according to the relationship between the color characteristics and physical symptoms.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.518-524
• /
• 2017

A flexible thermoelectric device using body heat has drawn attention as a power source for wearable devices. In this study, thermoelectric thick films were fabricated by cold pressing method using p-type antimony telluride and n-type bismuth telluride powders in accordance with specific loads. Thermoelectric thick films were denser and improved the electrical and thermoelectric properties while increasing the load of the cold pressing. The thickness of the specimen can be controlled by the amount of material; specimens were approximately 700 um in thickness. Flexible thermoelectric devices were manufactured by using the thermoelectric thick films on PI (Polyimide) substrate. The process is cheap, efficient, easy and scalable. Evaluation of power generation performance and flexibility on the fabricated flexible thermoelectric device was carried out. The flexible thermoelectric device has great flexibility and good performance and can be applied to wearable electronics as a power source.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.58-63
• /
• 2020

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.101-110
• /
• 2024

The purpose of this study is to analyze the effect of monitoring and feedback on walking activity using wearable devices on changes in body composition and metabolic syndrome factors in middle-aged woman. The subjects use a mobile interlocking wearable device for 6 month, feedback is provided through mobile app automatically transmitted step counter and walking activity. As a results, significantly difference shows on body weight, skeletal muscle mass, and body fat in statistically(p<.001). In changes of metabolic syndrome factor, systolic(p<.05), fasting flucose(p<.01), abdominal circumference(p<.001), TC(p<.001), and LDL-C(p<.05) are significantly difference. In conclusion, wearable devices that can be conveniently applied is an effective tool to increase walking activity and prevent metabolic syndrome of people with a sedentary lifestyle.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.312-322
• /
• 2020

As the use of mobile devices increase, there is public interest in the utilization of the human motion generated mechanical energy. The human motion generated mechanical energies vary depending on the body region, type of motion, etc., and an appropriate device has to be designed to utilize them effectively. In this work, a device based on the principles of triboelectric generation and inertia was assessed in order to utilize the multi-axial mechanical energies generated by human motions. To improve the output performance we confirm the changes in the output that vary with the structural design, the reasons for such changes, and variations in performance based on the parts of the human body. In addition, the level of electrical energy generated based on motion type was measured; a maximum voltage of 30 V and a current of 2 ㎂ were generated. Finally, the proposed device was utilized in LEDs used for lighting, thus demonstrating that multi-axial mechanical energies can be harvested effectively. Based on the results, we expect that the developed device can be utilized as a sensor to detect mechanical energies, to sense changes in motion, or as a generator for auxiliary power supply for mobile devices.