• IE interfaces
• /
• v.17 no.3
• /
• pp.282-293
• /
• 2004

Line Balancing is the problem to assign tasks to stations while satisfying some managerial viewpoints. Most researches about the Mixed-Model Line Balancing problems are focused on the minimizing the total processing time or the number of workstations. Independently, some research reports consider the balance issues of the physical workloads on the assembly line. In this paper, we are presenting a new mathematical model to accomplish the line balance considering both the processing time and the workloads at the same time. To this, end, we propose an zero-one integer program problem, and we use the Chebyshev Goal Programming approach as the solution method. Some computational test runs are performed to compare the pay-offs between the processing time and the workloads. And, the test results show us that the reliable balanced work schedules can be obtained through the proposed model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.04a
• /
• pp.33-43
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system instead of EDI system and suggests the economic effects occurred by the on-line processing system. The result of the paper presents that if data transmission area such as 'ocean vessel entrance report', 'application for using tug boat'and 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.410-415
• /
• 2008

On-line monitoring of fresh tomato paste processing was done using two radio frequency (RF) sensors resonant at 85 and 110 MHz. Fresh tomato juice with soluble solid content of about $5^{\circ}Brix$ was evaporated up to $23^{\circ}Brix$ and diluted down to about $5^{\circ}Brix$ again with a pilot scale evaporator. The RF sensors were installed in a processing pipe and monitored. The pastes at a specific $^{\circ}Brix$ level were sampled and analyzed for physical properties such as soluble solid content and viscosity. The relationships between sensor outputs and measured physical properties were analyzed. Analysis results showed RF sensor is feasible to apply on-line monitoring of tomato paste processing.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.563-572
• /
• 2002

A performance monitor is indispensable to trace and evaluate performance of a program under distributed processing environment. A performance monitor il classified as off-line and on-line according to its output method. An off-line performance monitor analyzes its performance after a program terminates, and an on-line performance monitor analyzes its one while a program runs. Therefore, the on-line function is essential to analyzing and debugging the program fast. JaNeC, distributed processing environment that is implemented in Java, contains an off-line performance monitor for this. However, this performance monitor may not analyze the program running on JaNeC efficiently. Consequently, this paper explains that an on-line performance monitor is designed and implemented for fast analysis and debugging of the program running on JaNeC. This on-line performance monitor is designed to minimize effects on a program to analyze, and provides various forms of graphic output, to analyze the program effectively. In addition, even after a program terminates, it provides interface with the off-line performance monitor, to analyze again.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.10
• /
• pp.701-707
• /
• 2000

This paper proposes a tension control to compensate friction loss using on-line friction torque observer for a continuous strip processing line. Friction loss of roller results in significant deviation of strip tension, accordingly it has an influence on the operation of other adjacent rolls. To avoid tension variation of the strip, a friction torque observer is designed in adjacent roll, which operates in speed control mode. The observed torque is added to the torque limit reference of the pay-off reel for on-line compensation of both friction loss and acceleration/deceleration torque at the same time. The simulation and experimental results show improvement of tension control performance by the proposed friction compensation method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.3
• /
• pp.14-23
• /
• 1994

A natural language processing system usually has the demerit that its processing time is relatively long. If an interactive system makes its user kept waiting long, it can't be said to be practical. In this paper, the on-line natural language parser in which its processing coincides with the sentence's inputting is designed. Since the greater part of morpholgical and syntatic semantic analysis is already performed during the keyboard input, user can get a prompt response. Moreover, the Korean parser is implemented in multitasking environment, and it is compared with an off-line parser. The on-line parser can be considered to be efficient for its real time processing.

• Applied Microscopy
• /
• v.44 no.2
• /
• pp.74-78
• /
• 2014

Dislocation density and distribution in epitaxial GaAs layer on Si are evaluated quantitatively and effectively using image processing of transmission electron microscopy image. In order to evaluate dislocation density and distribution, three methods are introduced based on line-intercept, line-length measurement and our coding with line-scanning method. Our coding method based on line-scanning is used to detect the dislocations line-by-line effectively by sweeping a thin line with the width of one pixel. The proposed method has advances in the evaluation of dislocation density and distribution. Dislocations can be detected automatically and continuously by a sweeping line in the code. Variation of dislocation density in epitaxial GaAs films can be precisely analyzed along the growth direction on the film.

• Journal of Korean Port Research
• /
• v.14 no.2
• /
• pp.133-142
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system. The result of the paper presents that if data transmission area such as 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.82-89
• /
• 2013

A detection method of high precision digital line within image is proposed in this paper. If we set the size of image to $N{\times}N$, in fact it is difficult to use the resulting values that the amount of computation is $O(N^4)$. Multiple algorithms are examined to reduced the amount of computation to $O(N^3)$, while suppressing the degradation of precision. How to detect line from the image processing, after stretching treatment of line segments extracted by Hough transform in the local area of an image is a great way to be able to detect several long or short line at high speed, but this method is slightly less precision in the detection of tilted line segments. In this paper, a line detection method improving the precision detection of tilted line segment is applied to the local area, thereby this method does not reduce the processing speed, while it is high precision method for detecting line segments. The experimental results confirm that the proposed method can detect a high precision line in a shorter period of time, compared with the existing methods.