• International Journal of Advanced Culture Technology
• /
• v.10 no.2
• /
• pp.246-251
• /
• 2022

As the number of data and devices explodes, centralized data processing and AI analysis have limitations due to the load on the network and cloud. On-device AI technology can provide intelligent services without overloading the network and cloud because the device itself performs AI models. Accordingly, the need for on-device AI technology is emerging. Many smartphones are equipped with On-Device AI technology to support the use of related functions. In this paper, we compare software tools that implement On-Device AI.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.236-239
• /
• 2003

The spent fuel slitting device is an equipment developed in order to feed UO$_2$pellet to the dry pulverizing/mixing device. In this study, we have compared and analyzed the handling method of the slitting and that of the pellet and hull, processing time, separating time for 20kgHM, the number of blades, on the existing slitting device using in DUPIC, and spent fuel management technology research and test facility. Also, we have compared and analyzed about an advantage and weak point, designing and producing, processing, establishment, operation, maintenance about the vertical and horizontal slitting device. Based on these results, we have developed the vertical slitting device. By using the results, we have enhanced the slitting processing time(over 40%)in comparison with DUPIC device, and it will is effectively applied to available data for designing and producing of the hot test facility.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.131-137
• /
• 2005

This paper describes a new approach to the algorithm and fundamental characteristics of the device for monitoring the leakage currents flowing through zinc oxide (ZnO) surge arresters. In order to obtain a technique for a new on-line monitoring device that can be used in the deterioration diagnosis of ZnO surge arresters, the new algorithm and on-line leakage current detection device for extracting the resistive and capacitive currents using the phase shift addition method were proposed. The computer-based on-line monitoring device can sense accurately the power frequency leakage currents flowing through ZnO surge arresters. The on-line leakage current monitoring device of ZnO surge arresters proposed in this work has the high sensitivity compared to the third harmonic leakage current detection devices. As a consequence, it was found that the proposed leakage current monitoring device would be useful for forecasting the defects and degradation of ZnO surge arresters.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.298-302
• /
• 2009

This paper proposes a single sign-on scheme in which a mobile user offers his credential information to a home network running the OSGi (Open Service Gateway Initiative) service platform, to obtain user authentication and control a remote device through a mobile device using this authentication scheme, based on SAML (Security Assertion Markup Language). Especially by defining the single sign-on profile to overcome the handicap of the low computing and memory capability of the mobile device, we provide a clue to applying automated user authentication to control a remote device via a mobile device for distributed mobile environments such as a home network based on OSGi.

• Nuclear Engineering and Technology
• /
• v.34 no.5
• /
• pp.502-516
• /
• 2002

Wolsong NPP are CANDU6 type reactors and there are 4 CANDU6 type reactors in commercial operation. CANDU type reactors require on-power refuelling by two remote controlled F/Ms (Fuelling Machines). Most of channels, fuel bundles are float by channel coolant flow and move toward downstream, however in about 30% of channels the coolant flow are not sufficient enough to carry fuel bundles to downstream. For those channels a special device, FARE (Flow Assist Ram Extension) device, is used to create additional force to push fuel bundles. It has been showing that during fuelling operation of some channels the channel coolant flow rate is reduced below specified limit (80% of normal), and consequently trip alarm signal turns on. This phenomenon occurs on selected channels that are instrumented for the channel flow and required to use the FARE device for refuelling. Hence it is believed that the FARE device causes the problem. It is also suspected that other channels that do not use the FARE device for refuelling might also go into channel flow low state. The analysis revealed that the channel How low occurs as the FARE device is introduced into the core and disappears as the FARE device is removed from the core. This paper presented the FARE device behavior, detailed fuelling operation sequence with the FARE device and effect on channel flow low phenomena. The FARE device components design changes are also suggested, such as increasing the number or now holes in the tube and flow slots in the ring orifice.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.39-43
• /
• 2002

In present much CMOS devices used in VLSI circuit and Logic circuit. With increasing a number of device in VLSI, the confidence becomes more serious. This paper describe the mechanism of breakdown on CMOS, especially n-MOS, based on Hydro Dynamic model with device self-heating. Additionally, illustrate the CMOS latch-up characteristics on simplified device structure on this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.597-599
• /
• 2022

When IoT device performs on-device AI, the device is required to use various AI models selectively according to target service and surrounding environment. Also, AI model can be updated by additional training such as federated learning or adapting the improved technique. Hence, for successful on-device AI, IoT device should acquire various AI models selectively or update previous AI model to new one. In this paper, we propose AI model repository to tackle this issue. The repository supports AI model registration, searching, management, and deployment along with dashboard for practical usage. We implemented it using Node.js and Vue.js to verify it works well.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.04a
• /
• pp.45-55
• /
• 2000

Recently, as the prepress mainstream is changed to the digital wolkflow, various digital proofing systems such as high price dye sublimation printers and low price ink jet printers are widely used in printing industry. Generally, CRT monitors are also often used as a soft proofing device for hard-copy image output. However, displayed color image on CRT monitor does not match to the actual color printing sheets. Because, the color space of CRT monitor used RGB color space, and it is differ with printing device color space, CMY. Therefore, proper color compensations are needed to match the colors between hard-copy proofs on the printing device and soft copy proofs on the monitor. For the proper compensation, we used LUT and gamut mapping method for color space transformation between device dependent color space and device independent color space, vis a vis. This paper shows the application method and the usefulness of CRT monitor for the soft-copy proofing using the output characteristics of printing device.

• Journal of Sensor Science and Technology
• /
• v.30 no.2
• /
• pp.67-70
• /
• 2021

A new button-shaped electrical device was developed for a smart fabric. This electric button can be sewn anywhere on the garment, similar to a traditional button fastener. t not only performs a decorative function but also makes the fabric suitable for use in Internet of Things (IoT) applications. It has metallic through-holes such that it can be fastened onto a fabric by conductive sewing threads. When threaded through metallic holes, the button can communicate with the external device by transmitting and receiving data. In addition, it adds specific functions by stacking a detachable application layer on the base layer. It is robust to frequent washing, and thus has excellent repeatability for use as an IoT device. The feasibility of the electric button was successfully demonstrated by its ability to identify the physical activities of walking and running, monitoring ambient temperature, and turning on LED lights.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.31-32
• /
• 2004