• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.37-43
• /
• 2008

Purpose: To evaluate dosimetry results of three different techniques for whole breast irradiation after conservative surgery of large pendulous breast patient. Materials and Methods: Planning computed tomography (CT) scans for three techniques were performed on a GE Hi-speed advantage CT scanner in the supine (SP), supine with breast supporting Device (SD) and prone position on a custom prone mattress (PP). Computed tomography images were acquired at 5 mm thickness. The clinical target volumes (CTV), ipsilateral lung and heart were delineated to evaluate the dose statistic, and all techniques were planned with the tangential photon beams (Pinnacle$^3$, Philips Medical System, USA). The prescribed dose was 50 Gy delivered in 25 fractions. To evaluate the dose coverage for CTV, we analysed percent volume of CTV receiving minimum of 95%, 100%, 105%, and 110% of prescription dose ($V_{95}$, $V_{100}$, $V_{105}$, and $V_{110}$) and minimal dose covering 95% ($D_{95}$) of CTV. The dosimetric comparison for heart and ipsilateral lung was analysed using the minimal dose covering 5% of each organs ($D_5$) and the volume that received >18 Gy for the heart and >20 Gy for the ipsilateral lung. Results: Target volume coverage ($V_{95}$ and $V_{100}$) was not significantly different for all technique. The V105 was lower for PP (1.2% vs. 4.4% for SP, 11.1% for SD). Minimal dose covering 95% ($D_{95}$) of target was 47.5 Gy, 47.7 Gy and 48 Gy for SP, SD and PP. The volume of ipsilateral lung received >20 Gy was 21.7%, 11.6% and 4.9% for SP, SD and PP. The volume of heart received >18 Gy was 17.0%, 16.1% and 9.8% for SP, SD and PP. Conclusion: Prone positioning of patient for large pendulous breast irradiation enables improving dose uniformity with minimal heart and lung doses.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.191-200
• /
• 1979

For the use of antarctic krill as a fond protein source its compositional characteristics were investigated as the first part of the work includes other subjects such as processing of drill paste, concentrates, and fermented or seasoned product. In general composition of fresh frozen and preboiled frozen krill on board, the contents of crude fat and free amino nitrogen were higher in the former than in the latter which contained a high amount of ash. VBN was rather high as much as 37.6 and $26.4\;mg\%$ in both fresh frozen and preboiled krill. The pH of drill homogenates was 7.1 to 7.2 in both cases. Such a low pH might be attributed to a long term storage and temperature fluctuations during frequent transshipping. The amino acid competition of fresh frozen krill meat showed relatively high amount of glutamic acid, aspartic acid, lysine, proline, and leucine while methionine, histidine, serine, tyrosine, and phenylalanine were lower. Among the essential amino acids lysine and leucine were higher and methionine was lower. In tile composition of free amino acid proline, lysing, arginine, and alanine were higher comparatively to the contents of histidine, aspartic acid, serine, and threonine. It is noteworthy for nutritional qualification that tile essential amino acids particularly as lysine were abundant similarly to that of fishes. Heavy metal contents of krill meat 0.039 to 0.048 ppm as Hg, 0.06 to 0.11 ppm as Pb, less than 0.32 ppm as Zn, 0.008 to 0.012 ppm as Cd, 0.61 to 0.68 ppm as Fe, 0.87 to 1.37 ppm as Cu, and nondetective as Cr. A high Cu content seems to be resulted by tile blood pigment of crustacea. The ratio,1 of edible portion to non-edible portion were 37:63 in fresh frozen and 42:58 in preboiled frozen krill respectively. Release of drip after thawing was more in fresh frozen than in preboiled frozen drill marking $36\%$ and $24\%$ of both respectively.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.1
• /
• pp.127-152
• /
• 2017

China's utility model as a supplement to the invention patent, has short application duration, fast authorized speed, and has the same exclusive rights with patents, so companies can quickly dominate the market. But the utility model does not need to carry out substantive examination, so has lower stability, high frequency of invalid to accepted, so compare with the invention patent, difficult to be protected. In order to actively encourage the small and medium-sized enterprises to promote their inventions, and protect domestic patents, China established a protection policy of patent evaluation report for the utility model rights, especially the patent evaluation report can be used as evidence in a patent infringement trial, to provide judicial remedies for utility model patentee and the party of patent disputes. Many experts believe that the establishment of patent evaluation report system can improve the stability of the utility model patent right, and when the defendant request for invalidation of the patent right in the defense period, if there is no novelty, creativity lost or no other reason has not led to the stability of patent right given in a patent evaluation report of the utility model patents, the court may not suspend the trial, without having to wait for the Patent Reexamination Board makes the patent invalid declaration decisions, can improve the efficiency of the judicial process, accelerate the patentee's time. However, in practical patent infringement, the patent evaluation report system and invalidation system are in conflict. In this paper, through the analysis of the current China utility model system and compared with the South Korean utility model system, review the role and character of the patent evaluation report system, and through the actual cases of the utility model patent infringement litigation, analysis possible variates from the decision of patent evaluation report, to find out the reason of the patent evaluation report system being in conflict with the invalidation system, and research on the effectiveness for protecting Utility Model with China's Patent Evaluation Report.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.259-266
• /
• 1998

A study on the biological and chemical characteristics in the middle last Sea of Korea was carried out at 31 stations in October $11\~18$, 1995 on board the R/V Tam-Yang. The chlorophyll a concentration, new and regenerated production, and the vertical diffusion of nitrate from the thermocline structure were investigated. From the vertical distribution of chlorophyll a, subsurface maxima were observed near the thermorline at most stations including the frontal zone, except at the southern stations where the maximum chloropyll a concentration occurred at the surface, The nanophytoplankton was the most dominant fraction comprising $83.5\%$ of total phytoplankton cell numbers, but netphytoplankton were common at the southern stations where the dominant species were Rhizosolenia sp. Nitrogenous new production and regenerated productions were measured using the stable isotope $^{15}N$ nitrate and ammonia uptake method. The vertically integrated nitrogen production varied between 8.470 and $72.945\;mg\;N\;m^{-2}\;d^{-1}$. The f-ratio, which is the traction of new production from primary production, waried between 0.03 and 0.72, indicating that $3\%$ to $72\%$ of primary production was supported by the input of nutrients from below the euphotic zone and the rest are supported by ammonia recycled within the euphotic layer. This range of f-ratio encompasses from extremely oligotrophic to eutrophic area characteristics. The differences in productivity and f-ratio among stations were related to frontal structure and the bottom topography. The values were high near the frontal zone and low outside of it, and the station near Ulleng Island showed the highest f-ratio. Vertical diffusion coefficients were calculated from both the water column stability (Kz-1) of King and Devol's equation (1979) and new nitrogen requirement (Kz-2). The values of Kz-2 ($0.11\~0.55\;cm^2/s$) were relatively low compared to the values reported previously.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.45-52
• /
• 1974

This study was carried out to examine the subsitution possibility into water soluble amino resins instead of phenolic resin as a sizing material for the strength increase on the wet forming hardboard. The properties of hardboard, manufactured with amino-resins based urea, melamine, formaline, and methanol which were low priced domestic products, were examined in comparison with those of hardboard treated with phenolic resin. In this study by the results and discussions, it may be summarized as follows: 1. Amino-resins are able to be substituted for the phenolic resin as a good sizing material for strength increase in the manufacture of wet forming hardboard. Under the considerations of economic advantages and properties of hardboard, modified urea-melamine resin was given a best results. 2. The specific gravities of hardboard that were treated with phenolic resin was equal to that treated with modified amino type resin, and in case of urea-melamine resin, the specific gravity value were lowest among them. 3. The results of moisture contents were satisfied the standard which calls for 13 percent or below. There were no differences in moisture contents between hardboards, treated with melamine resin and modified urea-melamine resin but phenolic resin. The moisture contents of hardboard treated with phenolic resin was shown the lowest. 4. The water absorption of hardboard treated with phenolic resin was greater than those treated with amino resins, and to satisfy the standard of water resistance, the treatment of 2 percent paraffin wax emulsion was needed in this case. There were no differences in water absorptions between hardboards, treated with melamine resin and modified urea-melamine resin. To satisfy the standard of water resistance in this case the treatment of 1 percent paraffin wax emulsion was shown good results. 5. The differences among the flexural strength in using tested three adhesives were significant. The flexural strength were shown the signification by order of melamine resin, modified urea-melamine resin, and phenolic resin. In all cases to satisfy the standard of flexural strength, the treatment of 3 percent sizing materials for strength increase was needed.

• Journal of Radiation Protection and Research
• /
• v.40 no.3
• /
• pp.124-131
• /
• 2015

Radiation exposure to humans can be caused by the gamma rays emitted from natural radioactive elements(such as uranium, thorium and potassium and any of their decay products) of Naturally Occurring Radioactive Materials(NORM) or Technologically Enhanced Naturally Occurring Radioactive Materials(TENORM) added consumer products. In this study, assume that activity of radioactive elements is $^{238}U$, $^{235}U$, $^{232}Th$ $1Bq{\cdot}g^{-1}$, $^{40}K$ $10Bq{\cdot}g^{-1}$ and the gamma rays emitted from these natural radioactive elements radioactive equilibrium state. In this study, reflected End-User circumstances and evaluated annual exposure dose for products based on ICRP reference voxel phantoms and ICRP Recommendation 103 using the Monte Carlo Method. The consumer products classified according to the adhere to the skin(bracelet, necklace, belt-wrist, belt-ankle, belt-knee, moxa stone) or not(gypsum board, anion wallpaper, anion paint), and Geometric Modeling was reflected in Republic of Korea "Residential Living Trend-distributions and Design Guidelines For Common Types of Household.", was designed the Room model($3m{\times}4m{\times}2.8m$, a closed room, conservatively) and the ICRP reference phantom's 3D segmentation and modeling. The end-user's usage time assume that "Development and Application of Korean Exposure Factors." or conservatively 24 hours; in case of unknown. In this study, the results of the effective dose were 0.00003 ~ 0.47636 mSv per year and were confirmed the meaning of necessary for geometric modeling to ICRP reference phantoms through the equivalent dose rate of belt products.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2001

The utility tunnels are the important facility as a mainstay of country because of the latest communication developments. However, the utilities tunnel is difficult to deal with in case of a fire accident. When a cable burns, the black smoke containing poisonous gas will be reduced. This black smoke goes into the tunnel, and makes it difficult to extinguish the fire. Therefore, when there was a fire in the utility tunnel, the central nerves of the country had been paralyzed, such as property damage, communication interruption, in addition to inconvenience for people. This paper is based on the fire occurred in the past, and reenacting the fire by making the real utilities tunnel model. The aim of this paper is the scientific analysis of the character image of the fire, and the verification of each fire protection system whether it works well after process of setting up a fire protection system in the utilities tunnel at a constant temperature. The fire experiment was equipped with the linear heat detector, the fire door, the connection water spray system and the ventilation system in the utilities tunnel. Fixed portion of an electric power supply cable was coated with a fire retardant coating, and a heating tube was covered with a fireproof. The result showed that the highest temperature was $932^{\circ}c$ and the linear heat detector was working at the constant temperature, and it pointed at the place of the fire on the receiving board, and Fixed portion of the electric power supply cable coated with the fire retardant coating did not work as the fireproof. The heating tube was covered with the fireproof about 30 minutes.

• Radiation Oncology Journal
• /
• v.15 no.3
• /
• pp.263-268
• /
• 1997

Purpose : Authors designed a customized Small Bowel Displacement System (SBDS) to displace the small bowel from the Pelvic radiation fields and minimize treatment-related bowel morbidities. Materials and Methods : From August 1995 to Mar 1996. 55 consecutive patients who received pelvic radiation therapy with the SBDS were included in this study. The SBDS consists of a customized styrofoam compression device which can displace the small bowel from the radiation fields and an individualized immobilization abdominal board for easy daily setup in prone position After opacifying the small bowel with Barium3, the patients were laid Prone and posterior-anterior (PA) and lateral (LAT) simulation films were taken with and without the SBDS. The areas of the small bowel included in the radiation fields with and without the SBDS were compared. Results : Using the SBDS, the mean small bowel area was reduced by $59\%;on\;PA\;and\;51\%$ on LAT films (P=0.0001). In six Patients (6/55. $11\%$), it was Possible that no small bowel was included within the treatment fields. The mean upward displacement of the most caudal small bowel was 4.8 cm using the SBDS. Only $15\%$ (8/55) of patients treated with the SBDS manifested diarrhea requiring medication. Conclusion : The SBDS is a novel method that can be used to displace the small bowel away from the treatment portal effectively and reduce the radiation therapy morbidities. Compliance with setup is excellent when the SBDS is used.

• Korean Journal of Psychosomatic Medicine
• /
• v.27 no.2
• /
• pp.119-129
• /
• 2019

Objectives : The purpose of this study was to examine cognitive and psychological characteristics of patients who visited psychiatric outpatient clinic with military service suitability issues. Methods : Since January, 2017 to September, 2018, patients were recruited from the department of psychiatry of university hospital. Participants were diagnosed using DSM-5 criteria by board certified psychiatrists. And each of participants tested with K-WAIS-IV, K-SCL-95 by clinical psychologist. The data were analyzed using SPSS 18.0. Results : The results indicated 24.6% of the patients have significantly low level of intellectual functioning. and 10.8% of the patients have borderline level of intellectual functioning, and 26.3% of them were below average. The results of psychological characteristics showed patients have cautious and potentially dangerous level of depression, anxiety, agoraphobia, and suicidal idea. And PTSD subscale's mean score was above problematic level. Next, we divided patients into two groups based on question of whether the patient is eligible to serve in the military service or not arises from recruitment process or army training center. But two group didn't differ significantly. And for further analyses, we also divided patients into two groups based on if they got single psychiatric diagnosis or more than one psychiatric diagnosis. Conclusions : The results indicated that group which has coexisting psychiatric disorders were more depressed, had higher level of anger and aggression, and had more serious levels of suicidal ideas than single psychiatric diagnosis group. The implications and limitations were discussed along with some suggestions for the future studies.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.133-144
• /
• 2006

According to the latest report by the Customer Protection Board, those who moved into newly constructed buildings are complaining about unidentified pains, asking for more careful selection of constructive materials for prevention of such potential problems. It is internationally recognized today that ecological materials can serve a significant factor for users' health, environmental protection and better industrial competitiveness. This study examined eco-design aspects of each interior material through web site search, in order to help customers learn about and capitalize on eco materials in a proper manner. As a result, 1. It turned out that the domestic industry are giving an impetus to releasing new eco items focusing on lower VOCs emission or addition of functional components as part of the marketing strategy. However, it is recommended that company understand significance of life cycle, and produce eco-concept materials. 2. The reliable standard for choosing the domestic material is EL, HB, GR marks. It is desirable to enhance recycling technologies and expand the sustainable consumption. customer class, since many recycled items are not developed. 3. The sourcing is a vulnerable part in terms of the concept of being environment-friendly material. Therefore, many manufacturers should design the easy knock-down products and produce the good items using recycled materials instead of new raw materials. Also solutions for making the energy from burning material should be studied. 4. The guidebook or manual with correct information about eco-materials is required to promote production and consumption with sustainable concept. 5. Many manufacturers are emphasizing ecological materials for customers, but some of them intended to disrupt customers' proper selection by promoting even unverified items to be environment-friendly.