• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.216-218
• /
• 1995

This paper presents the concepts developed to propose Distributed Control System(DCS). To achieve adequate satisfaction under various conditions, the DCS should be designed from two points of view of functions distributions and performance planning. Performance evaluation criteria can be specified by the response time between units and the utilization of each unit. One has to also consider the ease and the cost of installation, maintenance, repair. Based on these characteristics, different system configuration can be evaluated and compared through results about evaluation criteria in order lo select the best DCS for particular process. The results, in abbreviated form, of the simulation DCS controlling a CAL(Continuos Annealing Line) plant of iron process ate presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1574-1586
• /
• 2008

Railway is the most effective transportation than any other traffic. But due to the its expensive maintenance fee and various components like roadbed, rail, rollingstock, electric and signal etc, the construction cost of the railway is usually higher than highway. Such a reason, a lot of cost and period are needed to complete the railway project. In addition that considering the decreasing of the SOC budget, the investment in the railway industry is getting hard than ever. This study analyzed the cost, term of work, freight & passenger transportation demand of the wide area railway electrification project and main line improvement project. And it compared the estimation value and real value of the projects like cost and period etc. And this study surveyed the economic feasibility including factors which are not considered in the feasibility study guide. With those results, This study suggest the project management and evaluation method to enlarge the efficiency of the railway construction project.

• 대한안전경영과학회지
• /
• 제9권1호
• /
• pp.51-63
• /
• 2007

It is noted that the disaster such as fire, explosion, collapse has been rapidly increased caused by strength deterioration of steel structures at petrochemical plant during fire. In this regard, it is stressed out that the legal requirement for fire proofing for steel structures at petrochemical plant should be carefully reviewed since the current legal requirement such as Industrial Safety & Health Law, Architectural Law has a conflict and different way of approach. In addition, it is our point of view that the present law should be revised to consolidate into single law including engineering design criteria to reflect unreasonable legal requirement. It is further our point of view that the performance certificate for fire proofing like UL-1709, basis of maintenance should be appropriately and reasonably provided in line with global practice.

• 대한심미치과학회지
• /
• 제13권1호
• /
• pp.31-39
• /
• 2004

For the prosthodontic results which are compatible with esthetics to be fulfilled, the first prerequisite would be periodontal intervention and stability, the second one may be functional competency and the ultimate goal should be ascribed to esthetic considerations. Other words, esthetic dentistry is a whole entity which encompasses the biological stability of the periodontium, physical accuracy of the prosthodontic structure and finally, the beauty which can be found in natural dentition. It also implies the harmonized lip line which reveals the well-balanced tooth morphology and health gum profiles (Red-White Esthetics). Largely, there lie some differences in the input system of the 3-dimentional data from the prepared abutments between respective computer-assisted systems available now. But the manufacturing systems (CAM) are very similar between them, to say, comprise numeric control systems with whole 3-dimensional milling units according to the restorations to be made. Now the author is going to present CAD/CAM Zirconia All Ceramic Restoration on the topics for the Red-White Esthetics, periodontal control and maintenance, treatment for the discolored teeth, post & core build-up works for the devitalized teeth, characteristics of the Zirconium oxide All Ceramics, fabrication procedures, clinical considerations and its application to diverse clinical situations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.153-156
• /
• 2000

To reduce the maintenance expense, and the possibility of electric outage and accident, we should optimize the outdoor insulation system. And for the optimization, accurate measurement for the degree of contamination with climatic conditions, such as wind, rain, and drought, should be carried. However the classical measuring method, brush wiping, has some problems in the aspect of man power, reliability, and expense. In this paper, we propose two type apparatus, which could detect the degree of contamination on insulators in outdoor insulation system, such as transmission and distribution line insulator and bushing. One use the leakage current, and the other use the oscillating frequency to check the degree of contamination. To avoid the oxidation of electrode AC source, and the low degree of contamination was applied. From the result of this investigation we could get the good relationship between the degree of contamination and the leakage current and oscillating frequency

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.257-262
• /
• 2010

Lower tunnels and concrete based tracks are introduced to newly constructed metro lines to reduce the construction and track maintenance fees. But such a lower tunnel together with concrete based track causes higher interior noise of metro trains. It is required that the trains should not only be a transportation media but also be comfortable. So, to lower the metro train's interior noise level, design was made to increase the transmission loss per sectional part. Through such a design, it is expected that about 7 dB(A) of noise level will be reduced compared to that of the conventional train.

• 디지털산업정보학회논문지
• /
• 제17권4호
• /
• pp.85-94
• /
• 2021

The LPR system's trigger sensor makes problem occasionally due to the heave weight of vehicle or the obsolescence equipment. If we replace the hardware sensor to the deep-learning based software sensor in order to generate the trigger signal, LPR system maintenance would be a lot easier. In this paper we proposed the deep-learning sliding window based object detection and tracking algorithm for the LPR system's trigger signal generation. The gate passing vehicle's license plate recognition results are combined into the normal tracking algorithm to catch the position of the vehicle on the trigger line. The experimental results show that the deep learning sliding window based trigger signal generating performance was 100% for the gate passing vehicles including the 5.5% trigger signal position errors due to the minimum bounding box location errors in the vehicle detection process.

• 산업융합연구
• /
• 제4권1호
• /
• pp.3-15
• /
• 2006

Musculoskeletal Disorders are usually caused or aggravated by poor work processes and unsuitable working conditions - that involve or repetitive or forceful movements or the maintenance of constrained or awkward postures. The condition is characterized by discomfort and persistent pain. Case and Demographic Characteristics for Work-related Injuries and Illnesses Involving Days Away From Work, 2004. U.S" was examined. Causes of musculoskeletal disorders for assembly line workers were carpal tunnel syndrome(CTS), tendonitis, low back pain, and occupational stress. Recommendations of improvement for productivity are redesign of working conditions, exercise, prevent of musculoskeletal disorders and avoiding stress.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.57-64
• /
• 2008

일반적으로 강재시설물에 사용되는 유기에폭시 도장의 경우, 일반적인 조건에서는 우수한 내구성을 보이고 있으나, 송/배전 시설물인 강재전력시설물과 같이 빛(자외선)이나 열에 노출되는 환경에서는 도막자체의 열화현상에 의한 피해가 더욱 심각하게 증가하고 있다. 본 연구의 목적은 무기계 액상 규산질을 기초로 한 강재용 도장제를 개발하는 것이다. 이를 위해 6가지 예비실험을 거쳐서 최적의 배합조건을 도출하였으며, 물리적 특성실험 및 내구성 실험을 수행하였다. 실험결과 개발된 무기계 도료는 현재의 유기계 도료의 성능을 확보하고 있었으며, 내화학성에 대한 저항성이 개선된다면, 강재 시설물의 대체 도료로 사용될 수 있으며, 그 적용성이 더욱 증가할 것으로 평가되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.87-94
• /
• 2006

교량의 설계 및 시공에 있어 적절한 설계하중을 산정하기 위해 차량의 하중을 측정하는 것은 매우 중요하다. 본 논문에서는 이동하중에 대해 다축의 모멘트 영향선을 이용하여 시간에 따라 하중을 식별하는 알고리듬을 제안하였다. 또한 2개 이상의 하중을 식별하는 경우, 시간에 따른 하중 식별 결과가 심한 진동을 하기 때문에 밀도추정함수를 통해 최종 식별하중을 구하는 방법을 제안하였다. 단경간 판형교에 대한 수치예제를 수행하여 제안한 알고리듬 및 방법들을 검증하였다. 수치예제에서는 계측오차와 속도오차에 대한 오차분석을 수행하였다. 또한 제안된 알고리듬을 6m 길이의 강재 모형교량을 이용한 실내실험을 통해 재검증하였다. 속도와 하중의 종류에 따라 하중식별 능력이 달랐으나 개발한 알고리듬이 최대 10% 수준의 오차 내에서 하중을 식별할 수 있음을 확인하였다.