• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1125-1134
• /
• 2013

Small cells such as pico or femto cells are promising as a solution to cope with higher traffic explosion and the large number of users. However, the users within small cells are likely to suffer severe inter-cell interference (ICI) from neighboring base stations (BSs). To tackle this, several papers suggest BS transmit power on/off control algorithms which increase edge user throughput. However, these algorithms require centralized coordinator and have high computational complexity. This paper makes a contribution towards presenting fully distributed and low complex joint BS on/off control and user scheduling algorithm (FDA) by selecting on/off pattern of BSs. Throughput the extensive simulations, we verify the performance of our algorithm as follows: (i) Our FDA provides better throughput performance of cell edge users by 170% than the algorithm without the ICI management. (ii) Our FDA catches up with the performance of optimal algorithm by 88-96% in geometric average throughput and sufficiently small gap in edge user throughput.

• Korean Journal of Veterinary Research
• /
• v.24 no.1
• /
• pp.1-7
• /
• 1984

This macroscopic observation was performed to investigate the aortic arch and their branches of the Korean native goat. Ten Korean native goats with black hairs ranging in body weight from 15 to 20kg were used. The findings were based on the latex cast of the vessels made by injection of neoprene latex. The results obtained were as follow; 1. The aortic arch of the Korean native goat gave off only one vessel, the Truncus brachiocephalicus. 2. The Truncus brachiocephalicus gave off the A. subclavia sinistra, the A. subclavia dextra and the Truncus bicaroticus. 3. The A. subclavia sinistra gave off the Truncus costocervicalis, the A. cervicalis superficialis and the A. thoracica interna, and continued as the A. axillaris sinistra. 4. The Truncus costocervicalis sinistra arose from the A. subclavia sinistra in all cases and gave off the A. scapularis dorsalis suprema and the A. cervicalis profunda, and continued as the A. vertebralis sinistra. 5. The branching pattern of the A. subclavia dextra was similar to that of the A. subclavia sinistra except the Truncus costocervicalis. The Truncus costocervicalis dextra was arisen together with the A. subclavia dextra in 8 out of 10 cases, while one of the remaining 2 cases arose as the first branch of the A. subclavia dextra and the other was given off directly from the Truncus brachiocephalicus. 6. The Truncus bicaroticus was continued from the Truncus brachiocephalicus after branching off the A. subclavia dextra in 8 out of 10 cases, but the Aa. carotidas communes sinistra and dextra were directly branched from the Truncus brachiocephalicus without forming the Truncus bicaroticus in the remaining 2 cases.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.813-823
• /
• 2018

UHD content is characterized by higher bandwidth requirements to provide seamless playback. The existing HTTP adaptive streaming scheme periodically requests video segment of lower quality than the available bandwidth in the steady state. In the steady state, the On-Off pattern is repeated due to the difference of the available bandwidth and the encoding rate of the content. And the repeated Off interval is causing the problem that can not efficiently use the available bandwidth. In the wireless environment where the delay and loss rate are higher with large bandwidth fluctuations, this problem is exacerbated because the available bandwidth is estimated inaccurately. Therefore, in this paper, we propose a segment scheduling scheme for efficient bandwidth utilization of UHD contents streaming in wireless environment. Proposed scheme is a group segment that simultaneously reqeusts multiple segments in one request message in order to reduce frequency of OFF interval. Through simulation, Our scheme improves bandwidth utilization.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.2
• /
• pp.262-272
• /
• 1996

The objective of this paper is to present relevant information and for proposing legal standards on pesticide residues around golf courses. Among 67 pesticide ingredients used for the courses in Korea, 30 items necessary for standard setting were selected and theoretical residue limits were computed. Pesticide residue limits applicable to golf courses in Korea were for 16 pesticides in run-off water on the health and ecotoxicological bases and in soil on the health basis, as selected by practical use pattern. It is recommended to accumulate scientific data by continuous research efforts in order to justify the pesticide residue limits in run-off water and soils of golf courses.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.9-10
• /
• 2006

The patterning for the active layer of organic semiconductors is important to attain completely organic-based OTFTs(Organic Thin Film Transistors). We studied on possibility of the application of the conventional photolithography technique to pattern the organic active layer poly(3-hexylthiophene)(P3HT). Patterned P3HT-based OTFTs with Bottom Contact(BC) configuration were fabricated using the conventional photolithography. We achieved field-effect mobilities in the saturation regime ${\sim}1.2{\times}10^{-3}cm^2/V{\cdot}s$, $I_{on/off}$ ratios ${\sim}10^5$ in the subtractive method, ${\sim}8{\times}10^{-4}cm^2/V{\cdot}s$, $I_{on/off}$ ratios ${\sim}10^3$ in the additive one.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.152-159
• /
• 1999

This paper describes the rmtion characteristics of a particle in GIS under AC voltage. To measure the motion characteristics of the particle, a model gas chamber and parallel plain electrodes were designed and manufactured lift-off voltages of wire and spherical particles on the electrode were calculated and rreasured, and electric charge was calculated. By using a high speed carrera, the rmtion characteristics of various particles with aw}ied voltages, such as motion pattern, lift-off time, lift-off height, were analyzed 1be lift-off voltages were greatly affected by diarreters of wire and spherical particles. At voltage around lift-off voltage, the stand-up particle in vertical state rmved up and down between electrodes and the height of the lift-off particle was low. At voltage around breakdown voltage, the particle repeated vertical rotation a few times while they were being lifted off, and then, they were floating between the electrodes.trodes.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.52-68
• /
• 2012

To achieve the aim of this study, 9 different types of samples were made to examine mechanical property according to structured pattern and type of Machi of pullover armhole of WholeGarment(seamless knitwear). With respect to samples, from which comparisons are made and anaylzed among basic characteristics of material, tensile strength & elongation and residual elongation due to repeated extension of armhole connecting part, the following conclusions could be obtained. It's revealed that the tensile strength of Machi part as being armhole connecting part of samples is more affected by Machi type than pattern structure. Of Machi types, it showed stronger tensile strength in the order of Normal(Normal Machi)< Machi_B(unilateral Machi)

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.28-34
• /
• 2004

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than 100${\mu}{\textrm}{m}$. In this study, we introduced oblique powder blasting, and investigated the effect of the impacting angle of particles, the scanning times and the stand-off distance on the surface roughness and the weight-loss rate of samples with no mask, and the wall profile and overetching of samples with different mask pattern in powder blasting of soda-lime glass. The varying parameters were the different impact angles between 50$^{\circ}$ and 90$^{\circ}$, scanning times of nozzle up to 40 and the stand-off distances 70mm and 100mm. The widths of mask pattern were 0.2mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA #600. The mass flow rate of powder during the erosion test was fixed constant at 175g/min and the blasting pressure of powder at 0.2Mpa.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.822-827
• /
• 2002

In general, jerk phenomenon appeared because of gear changing, when a vehicle starts off or climbs an incline. Therefore, it makes ride quality worse. In this paper, an optimal pattern of automatic transmission was designed using fuzzy logic in order to improve ride quality. After del eloping fuzzy rule for shift pattern control of automatic transmission, dynamic characteristics (i.e. acceleration, velocity, distance and so on) were simulated using dynamic model of a car. To do this he powertrain model of a vehicle with automatic transmission including torque converter, gear box, and final gear drive - from engine to tire - is developed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.120.1-120.1
• /
• 2015

We investigate the degradation pattern of Black phosphorus (BP) field effect transistor (FETs) investigated by using an mechanically exfoliated BP that react O2 and water vapor in ambient condition, degradation. The BP FETs was electrically measured every 20 minutes (1cycle) in the air, the total cycle is 100. We show electrical changes with Mobility, On/off ratio, Current and a significant positive shift in the threshold voltage. We extracted the current level at Vgs-Vth = 0, -10, -20 and fitting with Swiss-cheese model. This model suggested that Swiss-cheese model is well fitted with degradation pattern of BP FETs.