• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.503-513
• /
• 2016

In order to reduce the green-house gas exhaustion, International Maritime Organization (IMO) has been reinforcing carbon gas regulations. Due to the regulations, a lot of competitions for designing Eco ship in the shipbuilding industry are progressing now. It is faced with the necessity of reducing hull weight by combining automated systems for optimal compartment arrangement with hull structural design. Most researches on optimum structural design method have been consistently in progress and applied to minimize weight and cost of mid-ship section in preliminary ship design stage based on analytical structural analysis method on fixed compartment arrangement. In order to reduce design period and to improve international technical competitiveness by shortening the period of hull structural design and enhancing design accuracy, it has been felt necessity to combine optimized compartment arrangement with optimum design of ship structure based on the international regulations and rules. So in this study, the automated design algorithm for longitudinal members has been developed to combine automated algorithm of compartment arrangement with hull structural design system for oil tanker. The SeaTrust-Hullscan software developed by Korean Register is used to perform ship structural design for mother ship and selected design cases. The effect of weight reduction is verified with comparison of ship weight between mother ship and the cases suggested in this study.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.232-236
• /
• 2003

The anchor is laid on seabed and the main engine is worked to against incident environmental loads in typoon. As the main engine is broken down in the storm, the anchor chain is cutted and the vessel is drifted. Although a ship is moored by two point mooring lines to keep the her position, a ship is crashed into a rock because of typoon and the accident of oil spilling may be occured. In this paper, we studied the position-keeping of a ship which is analyized based on the slow motion maneuvering equations considering wave, current and wind. The direct integration method is employed to estimate wave loads. The current forces are calculated by using mathematical of MMG. The two point mooring forces are quasisatatically evaluated by using the catenary equation. The coefficeints of wind forces are modeled from Isherwood’s emperical data and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two point moored ship are simulated considering wave, current, wind load in time domain.

• Journal of the Korean Institute of Navigation
• /
• v.9 no.2
• /
• pp.65-97
• /
• 1985

According to the report prepared by Legl Committee of IMO, 1978, since the disaster of motor tanker Amoco Cadiz carrying approximate 220, 000 tons of crude oil was wrecked on the coast of France and damaged the largest oil pollution accident in shipping history, Legal Committee of IMO has studied and discussed a new Salvage Convention with assistance of CMI. CMI has prepared a new draft convention under the chairmanship of professor Erling Chr. Selvig and adopted it as a report of CMI to IMO in the 32 Internaltional Conference of CMI, Montreal, May, 1981. This paper has been written to study comparatively andinterprete the questions and/or considerations of the new draft convention by the delegates participated in the Legal Committee of IMO in particular on the private legal view of it. This Salvage Convention Draft has not yet been deliberated thoroughly to agreed the revisiion of the 1910 Convention in accordance with CMI Report 1981 until session 54, March 1985. Therefore this paper has been prepared in the light of the comments made at the Legal Committee in order to interpret the legal questions and contents of the new draft.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.8-12
• /
• 2004

The anchor is laid on the seabed, and the main engine is working against incident environmental loads in a typhoon. As the main engine is broken Mum in the storm, the anchor chain is cut and the vessel drifts. Although a ship is moored by two-point mooring lines to maintain her position, it has crashed into a rock because of a typhoon, resulting in a possible accidental oil spillage. In this paper, we studied maintenance of a ship's position, which is analyzed based on the slow motion maneuvering equations considering wave, current, and wind. To estimate wave loads, the direct integration method is employed. The current forces are calculated, using MMG (Mathematical Modeling Group). Th two-point mooring forces are quasi-statistically evaluated, using the catenary equation. Th coefficients of wind forces are modeled from Isherwood's empirical data, and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two-point moored ship are simulated, considering wave, current, and wind load, in specific domain of time.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.149-156
• /
• 1992

An efficient preprocessor is developed for the finite element structural analysis of a ship's hull module. A hull module structure is divided into three groups for easy data handling : longitudinal members, transverse members, and transverse bulkheads. Based on the classification rules and design practices at shipyards, the preprocessor can create finite element nodes, elements, boundary conditions, and loadings automatically. By connecting the preprocessor with the ANSYS program, we can obtain the results of ship structureal analysis more efficiently. Applied to a typical double-hull oil tanker, the present preprocessor shows various advantages over conventional general-purpose preprocessors.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.97-104
• /
• 2021

Together with the emerging of the Eco-ship, the application of large-diameter and high-efficiency propeller required more careful attention than before in the design of the shafting system. After the adoption of Environmentally Acceptable Lubricants (EAL) to the stern tube lubrication oil, a number of aft stern tube bearing accidents have been reported, and a variety of institutions have actively conducted research on the cause relationship. This study attempted to find the cause of the accident by measuring the alignment of the shafting system of a medium-sized product/chemical tanker with aft stern tube bearing damage and analyzing the reaction force of each bearing. In addition, a reasonable solution to the correction of the shaft alignment was suggested and the feasibility was reviewed. Through various measured data and analysis, the actual installation of shafting system was slightly different from the design drawing condition, but it was found that each bearing load distribution was within the allowable range. Therefore, it was confirmed that the cause of this accident was due to the dissatisfaction the misalignment slope of aft stern tube bearing rather than the effect of the bearing overload. As a solution to this cause, countermeasures such as double slope were suggested in the aft stern tube bearing, and the characteristics of EAL also seem to have an indirect effect.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.57-58
• /
• 2006

Pumps have been widely used for transporting fluid in most of the merchant ships. However, the present status of using pumps for marine vessels has not been studied. This paper is to classify and analyze pumps installed in many ships(LNGC, Oil Tanker, Bulk, Container, Training ship). Finally, Pumps installed in the training ships are compared with merchant ships about the present status of using pumps.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.40-45
• /
• 2006

For ships of ice class, finish Maritime Administration(FMA) requires brackets on intersections between longitudinal frames and the web frames within the ice-strengthened area. The main object of this paper is to verify ultimate load carrying capacity of longitudinal frame without brackets of engine room region of 74,100 DWT Product Oil Tanker. Comparative approach between proposed structures from builder (the proposed structure) and structures satisfying the Finnish-Swedish ice class rules (the rule structure) is used for the analysis.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.2
• /
• pp.13-22
• /
• 1995

This paper presents the numerical analysis results of the viscous flow for a full ship model. The mass and momentum conservation equations are used for governing equations, and the flow field is discretized by the Finite-Volume Method for the numerical calculation. An algebraic grid and elliptic grid generation techniques are adopted for generation of the body-fitted coordinates system, which is suitable to ship's hull forms. Time-marching procedure is used to solve the three-dimensional unsteady problem, where the convection terms are approximated by the QUICK scheme and the 2nd-order central differencing scheme is used for other spatial derivatives. A Sub-Grid Scale turbulence model is used to approximate the turbulence, and the wall function is used at the body surface. Pressure and velocity fields are calculated by the simultaneous iteration method. Numerical calculations were accomplished for the Crude Oil Tanker(DWT 95,000tons, Cb=0.805) model. Calculation results are compared to the experimental results and show good agreements.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.54-62
• /
• 2003

This paper surveys a number of remotely operated recovery techniques and their recent applications in the removal of the toxic liquid from sunken ships, and suggests the appropriate recovery technique for our ocean environment, especially, in view of its cost and efficiency. Authors also give the technical requirements for the suggested remotely operated recovery system and the basic design result which is well-matched with such requirements.