• 풍력에너지저널
• /
• 제5권1호
• /
• pp.22-32
• /
• 2014

The structural design of a wind turbine must show the verification of the structural integrity of all load-carrying components. Also, design load calculations shall be performed using appropriate and accurate methods. In this study, advanced numerical approach for the calculation of design loads based on unsteady computational fluid dynamics (CFD) is presented considering extreme design load conditions such as the extreme coherent gust (ECG) and the 50 year extreme operating gust (EOG). Unsteady aerodynamic loads are calculated based on Reynolds average Navier-Stokes (RANS) equations with shear-stress transport k-ω(SST k-ω) turbulent model. A full three-dimensional 5 MW offshore wind-turbine model with rotating blades, hub, nacelle, and tower configuration is practically considered and its aerodynamic interference effect among blades, nacelle, and tower is also accurately considered herein. Calculated blade loads based on unsteady CFD method with respect to blade azimuth angle are compared with those by NREL FAST code and physically investigated in detail.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1346-1351
• /
• 2012

해상풍력발전기초의 국부세굴을 평가하기 위하여 3차원 수치해석인 FLOW-3D를 이용하여 모노파일과 자켓기초에 대해 해석을 수행하였다. 수치해석 결과에 의하면 모노파일과 자켓기초 레그 주위에서 국부적으로 유속이 증가하는 것으로 나타났으며, 그 후면에서는 후류 및 와류로 인하여 유속의 감소가 나타났다. 자켓기초의 경우에는 모노파일에 비해 단일 레그의 직경이 작고, 자켓레그 사이의 간섭효과 및 자켓구조물의 복잡한 형상으로 인하여 모노파일에 비하여 국부적인 유속 증가가 더 크게 나타났으며 세굴심이 더 깊게 형성되는 것으로 나타났다. 따라서, 해상풍력발전 기초의 세굴 평가 및 세굴방지공 설계시 하부구조물의 형상에 대한 고려가 필요한 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1908-1914
• /
• 2012

풍력발전기의 용량이 점차 대형화되고 해상풍력단지는 수심이 깊은 곳에 조성됨에 따라 해상풍력발전구조물의 하부구조 및 기초시공비용 또한 급격히 증가될 것으로 예상된다. 석션버켓기초는 버켓형식의 기초를 자중에 의한 관입과 자중관입 이후 석션에 의한 관입으로 설치하는 공법이며, 대형장비 대신 충분한 용량의 펌프만 있으면 기초의 시공이 가능하므로 시공이 간편하고 경제적인 공법으로 알려져 있다. 본 연구에서는 석션버켓기초의 경제성을 검토하기 위하여 상부지반이 사질지반과 연약지반인 경우일 때 대수심 조건에 적용 가능한 기초형식인 자켓과 석션버켓기초를 적용한 트라이포드의 시공비용을 비교하였다. 그 결과 지반이 단단하고, 기초개수가 증가할수록 자켓형식보다는 트라이포드 버켓기초형식을 적용하는 것이 더 경제적임을 확인하였다.

• Wind and Structures
• /
• 제29권1호
• /
• pp.15-32
• /
• 2019

Much advancement has been made in wind power due to modern technological developments. The wind energy technology is the world's fastest-growing energy option. More power can be generated from wind energy by the use of new design and techniques of wind energy machines. The geographical areas with suitable wind speed are more favorable and preferred for wind power deployment over other sources of energy generation. Today's wind turbines are mainly the horizontal axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs). HAWTs are commercially available in various sizes starting from a few kilowatts to multi-megawatts and are suitable for almost all applications, including both onshore and offshore deployment. On the other hand, VAWTs finds their places in small and residential wind applications. The objective of the present work is to review the technological development, available sizes, efficiencies, structural types, and structural stability of VAWTs. Structural stability and efficiencies of the VAWTS are found to be dependent on the structural shape and size.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.18-24
• /
• 2015

Large wind turbine generators with high temperature superconductors (HTS) are in incessant development because of their advantages such as weight and volume reduction and the increased efficiency compared with conventional technologies. In addition, nowadays the wind turbine market is growing in a function of time, increasing the capacity and energy production of the wind farms installed and increasing the electrical power for the electrical generators installed. As a consequence, it is raising the wind power energy contribution for the global electricity demand. In this study, a forecast of wind energy development will be firstly emphasized, then it continue presenting a recent status of the technology development of large scale HTSG for wind power followed by an explanation of HTS wire trend, cryogenics cooling systems concept, HTS magnets field coil stability and other technological parts for optimization of HTS generator design - operating temperature, design topology, field coil shape and level cost of energy, as well. Finally, the most relevant projects and designs of HTS generators specifically for offshore wind power systems are also mentioned in this study.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.247-257
• /
• 2016

To predict annual energy production (AEP) accurately in the wind farm where located in Seongsan, Jeju Island, Equivalent wind speed (EQ) which can consider vertical wind shear well than Hub height wind speed (HB) is calculated. AEP is produced by CFD model WindSim from National wind resource map. EQ shows a tendency to be underestimated about 2.7% (0.21 m/s) than HB. The difference becomes to be large at nighttime when wind shear is large. EQ can be also affected by atmospheric stability so that is classified by wind shear exponent (${\alpha}$). AEP is increased by 11% when atmosphere becomes to be stabilized (${\alpha}$ > 0.2) than it is convective (${\alpha}$ < 0.1). However, it is found that extreme wind shear (${\alpha}$ > 0.3) is hazardous for power generation. This results represent that AEP calculated by EQ can provide improved accuracy to short-term wind power forecast and wind resource assessment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.412-413
• /
• 2009

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.21-24
• /
• 2021

• 신재생에너지
• /
• 제16권4호
• /
• pp.33-40
• /
• 2020

The research topics of more than 1,900 wind energy papers registered in the Korean Journal Citation Index (KCI) were modeled into 25 topics using latent directory allocation (LDA), and their consistency was cross-validated through principal component analysis (PCA) of the document word matrix. Key research topics in the wind energy field were identified as "offshore, wind farm," "blade, design," "generator, voltage, control," 'dynamic, load, noise," and "performance test." As a new method to determine the similarity between research topics in journals, a systematic evaluation method was proposed to analyze the correlation between topics by constructing a journal-topic matrix (JTM) and clustering them based on topic similarity between journals. By evaluating 24 journals that published more than 20 wind energy papers, it was confirmed that they were classified into meaningful clusters of mechanical engineering, electrical engineering, marine engineering, and renewable energy. It is expected that the proposed systematic method can be applied to the evaluation of the specificity of subsequent journals.

• 풍력에너지저널
• /
• 제14권2호
• /
• pp.26-33
• /
• 2023

In this study, the global response characteristics of floater and mooring for floating offshore wind turbine with a detachable mooring system are performed. Global motion and structural response result extracted from the coupled motion analysis of 10MW DTU floating offshore wind turbine with detachable mooring system modeled by high-order boundary element model and finite element mesh, were used to study the characteristics of tension on mooring lines subjected to three different types of ocean loads. Breaking limit of mooring line characterized by wind, current and wave load has a major effect on the distribution of mooring tension found in time domain analysis. Based on the numerical results of coupled motion analysis, governing equation for calculating the motion response of a floater under ocean loads, and excitation force and surge motion and tension respectively are presented using excursion curve. It is found that the response of floater is reliable and accurate for calculating the tension distributions along the mooring lines under complex loadings. This means that the minimun breaking limit of mooring system satisfied a design criteria at ultimate ocean environmental loading condtions.