• 한국태양에너지학회 논문집
• /
• 제36권4호
• /
• pp.21-29
• /
• 2016

Commercial wind farm design tools and the national wind map are used to determine the implementation potential of offshore wind power in Korea in this study. For this, the territorial waters of Korea were divided into nine analysis regions and a commercial CFD code was used to obtain wind resource maps at 100m A.S.L. which is the hub height of a 5MW wind turbine used in this study. With the wind resource obtained, factors including water depth, distance from substations, minimum and maximum capacity of a wind farm, distance between turbines and wind farms were considered to determine wind power potential. Also, the conservation areas, military zones, ports, fishing grounds, etc. were considered and excluded. As the result, a total capacity of 6,720 MW was found to be the implementation potential and this corresponds to $3.38MW/km^2$ in API. Also if the distance from the substation is not considered, the potential increased to be 10,040 MW. This offshore wind farm potential is considered enough to satisfy the target of wind farm capacities in the 7th national plan for electricity demand and supply.

• 한국태양에너지학회 논문집
• /
• 제32권1호
• /
• pp.1-7
• /
• 2012

Predictions of wind speed for six different near-shore sites were made using the NCAR (National Center for Atmospheric Research) wind data. The distances between the NCAR sites and prediction sites were varied between 40km and 150km. A well-known wind energy prediction program, WindPRO, was used. The prediction results were compared with the measured data from the AWS(Automated Weather Stations). Although the NCAR wind data were located far away from the AWS sites, the prediction errors were within 9% for all the cases. In terms of sector-wise wind energy distributions, the predictions were fairly close to the measurements, and the error in predicting main wind direction was less than $30^{\circ}$. This proves that the NCAR wind data are very useful in roughly estimating wind energy in offshore or near-shore sites where offshore wind farm might be constructed in Korea.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.83-89
• /
• 2015

This study suggests the methodology to decide the number and adequate capacity of substation transformer in a large-scale offshore wind farm (OWF). The recent trend in transformer capacity of offshore substation is analyzed in many European offshore wind farm sites prior to entering the studies. In order to carry out the economic evaluation for the transformer capacity we present the cost models which consist of investment, operation, and expected energy not supplied (EENS) cost as well as the probabilistic wind power model of wind energy that combines the wind speed with wind turbine output characteristics for a exact calculation of energy loss cost. Economic assessment includes sensitivity analysis of parameters which could impact the 400-MW OWF: average wind speed, availability, discount rate, energy cost, and life-cycle.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.238-244
• /
• 2022

Maintenance works of offshore wind turbines could take a longer time, which causes the reduction of their energy production efficiency, than those of onshore wind turbines owing to severe offshore environment. Subsequently, preventive maintenance measures are required to increase the production efficiency. Thus, we proposed a wheel-based Underwater Pole Climbing Robot (UPCR) platform, which was aimed at the periodic inspection and maintenance of the substructures of the offshore wind turbines, with three advantages: high speed, good mobility and low power consumption. In the proposed platform, a self-locking system using a gripper module was adopted for preventing slippery problem and a dual configuration was chosen for moving on a branched structure. As a result, the proposed robot was able to continuously climb, preserve it's position at the pole without consuming energy, and move from the pole to the other branched pole. The results of this research show that the UPCR has basic moving capabilities required for the underwater work for the substructures of the offshore wind turbines.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.691-698
• /
• 2020

해상풍력 발전단지의 전력망 연계방식에 따라 설치비용이나 고장전류의 크기가 달라진다. 그렇기 때문에 단지의 용량과 위치 등을 고려한 효율적인 전력망 연계 방법이 필요하다. 특히 해상풍력 발전단지의 전력케이블은 대부분 비용 및 효율적인 부분을 고려하여 3-core를 사용한다. 케이블 단락 같은 고장이 발생하면 케이블 전체를 교체해야 하므로 수리비용 및 터빈 정지 기간을 고려하였을 때 비용적인 측면에서 상당한 손실이 발생할 수 있다. 따라서 본 논문에서는 제주해상에 설치될 100 MW 풍력단지에 방사형, 링형, 성형 방식을 도입하여 이에 따른 3상 단락고장을 PSCAD/EMTDC 프로그램을 활용하여 컴퓨터 해석을 수행하고, 그 결과를 분석하여 모델 단지에 알맞은 전력망 연계방식을 제안하고자 한다.

• 한국태양에너지학회 논문집
• /
• 제36권1호
• /
• pp.27-37
• /
• 2016

A simple but practical Ensemble Prediction System(EPS) for wind power forecasting was developed and evaluated using the measurement of the offshore meteorological tower, HeMOSU-1(Herald of Meteorological and Oceanographic Special Unite-1) installed at the Southwest Offshore in South Korea. The EPS developed by the Korea Institute of Energy Research is based on a simple ensemble mean of two Numerical Weather Prediction(NWP) models, WRF-NMM and WRF-ARW. In addition, the Kalman Filter is applied for real-time quality improvement of wind ensembles. All forecasts with EPS were analyzed in comparison with the HeMOSU-1 measurements at 97 m above sea level during Typhoon Bolaven episode in August 2012. The results indicate that EPS was in the best agreement with the in-situ measurement regarding (peak) wind speed and cut-out speed incidence. The RMSE of wind speed was 1.44 m/s while the incidence time lag of cut-out wind speed was 0 hour, which means that the EPS properly predicted a development and its movement. The duration of cut-out wind speed period by the EPS was also acceptable. This study is anticipated to provide a useful quantitative guide and information for a large-scale offshore wind farm operation in the decision making of wind turbine control especially during a typhoon episode.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.349-353
• /
• 2012

As the world wind energy market grows rapidly, the productions of wind power generation equipment have recently increased, but manufacturers are not able meet this requirement. Particularly offshore wind energy industry is one of the most popular renewable energy sectors. To generalize welding processes, the welding automation is considered for steel structure manufacturing in offshore wind energy to get high quality and productivity. Welding technology in construction of the wind towers is depended on progress productivity. In addition, the life of wind tower structures should be considered by taking account of the natural weathering and the load it endures. The root passes are typically deposited using Gas Tungsten Arc Welding(GTAW) with a specialized backing gas shield. Not only the validation consists of welders experienced in determining the welding productivity of the baseline welding procedure, but also the standard testing required by the ASME section IX and API1104 codes, toughness testing was performed on the completed field welds. This paper presents the welding characteristics of the root-pass welding of high tensile steel in manufacturing of offshore wind tower. Based on the result from welding experiments, optimal welding conditions were selected after analyzing correlation between welding parameters(peak current, background current and wire feed rate) and back-bead geometry such as back-bead width(mm) and back-bead height performing root-pass welding experiment under various conditions. Furthermore, a response surface approach has been applied to provide an algorithm to predict an optimal welding quality.

• 해양환경안전학회지
• /
• 제24권7호
• /
• pp.841-847
• /
• 2018

세계 에너지 소비와 에너지 수요가 급격히 증가함에 따라 환경문제와 지속가능성에 대한 관심이 요즘 더욱 중요해지고 있다. 신재생에너지 중 해상풍력발전과 같은 깨끗하고 재생가능한 에너지자원은 대체에너지 자원으로 주목받고 있다. 유지보수 및 운영상의 관점에서 해상풍력발전은 일반적으로 연근해해역에 설치될 계획이지만 해상풍력발전단지의 개발은 계획된 풍력단지를 따라 기존의 해상교통으로부터 다양한 해상교통 간섭에 직면해 있는 실정이다. 해상풍력발전단지 인근해역 및 단지 내에서 해상교통을 안전하고 효과적으로 통제하기 위해 선박이 해상풍력단지 내에서 통항할 수 있도록 표준 기준을 제안한다. 따라서, 본 연구의 목적은 국외 해상풍력발전단지의 현지 규정을 조사하여 해상풍력발전단지에 대한 선박통항 허용 및 안전구역 기준을 수립 하는데 있다. 풍력단지의 내측 안전구역은 풍력터빈 날개 회전직경의 150 %를 적용한 거리와 외측안전구역으로는 외곽에 위치한 풍력터빈으로부터 200 m의 범위의 거리를 제시하였으며, 또한 풍력단지 내 선박통항 허용기준은 풍력터빈 날개의 높이와 조위를 평가하여 향후 서남해 해상풍력발전단지의 실증단지 해역에서 Air draft 14.47 m가 선체 접촉을 피할 수 있는 최소 마진을 가진 기준을 제시하였다. 향후 연구과제로서, 단일 해상풍력단지 내의 선박 통항 기준과 더불어 인접한 해상풍력단지 간의 선박통항 기준마련을 위한 후속연구가 필요하다.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.905-911
• /
• 2012

부유식 해상풍력발전기의 시뮬레이션을 위해서 본 연구에서는 2MW 육상 풍력발전기에 부유구조물인 Tension Leg Platform(TLP) 구조를 추가하였다. 기상청 관측데이터와 해수면으로부터의 높이에 대해 풍속을 정의하는 지수법칙을 이용하여 풍하중을 산출하고 블레이드와 타워에 일정한 높이간격으로 적용하였다. 상대모리슨 방정식을 이용하여 파랑하중을 모델링하였다. 블레이드의 회전속도를 정격속도인 18rpm 으로 고려하고, 풍하중과 파랑하중 작용 시 2MW의 부유식 해상풍력기의 동적거동 해석을 수행하였다. 파랑하중에 대한 해상풍력기의 공진특성을 조사하기 위해 타워와 블레이드의 탄성체 모델을 구성하여 해상풍력기의 고유진동수를 계산하였다. 타워와 블레이드의 탄성효과가 해상풍력기의 거동에 미치는 영향을 분석하기 위해 타워만 탄성체로 구성된 탄성타워모델과 타워와 블레이드가 탄성체로 고려된 탄성타워 블레이드모델을 각각 강체 모델과 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.239-240
• /
• 2015

This paper presents the transient state characteristic and single phase ground fault occurred by deterioration of surge arrester when offshore wind turbine is struck by lightning strike. The wind turbine and submarine cable data are based on the 2.5GW offshore wind farm planned in South Korea Southwest Seashore. During lightning strikes, additional ground fault can lead to damage of the generation components. So, the sensitive analyses are conducted in order to investigate the effects of lightning strike on offshore wind farm.