DOI QR코드

DOI QR Code

Dynamic Behavior Analysis of Floating Offshore Wind Turbine Including Flexible Effects of Tower and Blade

타워와 블레이드의 탄성효과를 고려한 부유식 해상풍력발전기의 동적거동해석

  • Jung, Hye-Young (Graduate school of Mechatronics Engineering, Pukyong Nat'l Univ.) ;
  • Sohn, Jeong-Hyun (Dept. of Mechanical & Automotive Engineering, Pukyong Nat'l Univ.)
  • 정혜영 (부경대학교 대학원 메카트로닉스공학과) ;
  • 손정현 (부경대학교 기계자동차공학과)
  • Received : 2012.02.20
  • Accepted : 2012.06.13
  • Published : 2012.08.01

Abstract

To establish a floating offshore wind turbine simulation model, a tension leg platform is added to an onshore wind turbine. The wind load is calculated by using meteorological administration data and a power law that defines the wind velocity according to the height from the sea surface. The wind load is applied to the blade and wind tower at a regular distance. The relative Morison equation is employed to generate the wave load. The rated rotor speed (18 rpm) is applied to the hub as a motion. The dynamic behavior of a 2-MW floating offshore wind turbine subjected to the wave excitation and wind load is analyzed. The flexible effects of the wind tower and the blade are analyzed. The flexible model of the wind tower and blade is established to examine the natural frequency of the TLP-type offshore wind turbine. To study the effect of the flexible tower and blade on the floating offshore wind turbine, we modeled the flexible tower model and flexible tower-blade model and compared it with a rigid model.

부유식 해상풍력발전기의 시뮬레이션을 위해서 본 연구에서는 2MW 육상 풍력발전기에 부유구조물인 Tension Leg Platform(TLP) 구조를 추가하였다. 기상청 관측데이터와 해수면으로부터의 높이에 대해 풍속을 정의하는 지수법칙을 이용하여 풍하중을 산출하고 블레이드와 타워에 일정한 높이간격으로 적용하였다. 상대모리슨 방정식을 이용하여 파랑하중을 모델링하였다. 블레이드의 회전속도를 정격속도인 18rpm 으로 고려하고, 풍하중과 파랑하중 작용 시 2MW의 부유식 해상풍력기의 동적거동 해석을 수행하였다. 파랑하중에 대한 해상풍력기의 공진특성을 조사하기 위해 타워와 블레이드의 탄성체 모델을 구성하여 해상풍력기의 고유진동수를 계산하였다. 타워와 블레이드의 탄성효과가 해상풍력기의 거동에 미치는 영향을 분석하기 위해 타워만 탄성체로 구성된 탄성타워모델과 타워와 블레이드가 탄성체로 고려된 탄성타워 블레이드모델을 각각 강체 모델과 비교하였다.

Keywords

References

  1. Musial, W.D., Butterfield, C.P. and Boone, A., 2004, "Feasibility of Floating Platform Systems for Wind Turbines," 23rd ASME Wind Energy Symposium Proceedings, Reno, Nevada, January, NREL/CP-500-34874.
  2. Musial, B. W., Jongman, J. and Sclavounos, P., 2007, "Engineering Challenges for Floating Offshore Wind Turbines," NREL Conference paper, USA, Cp-500-38776R.
  3. Park, T. H. and Cho, J. W., 2002, "A Time Domain Calculation for the TLP(Tension Leg Platform)," In Proceedings of the Korean Society of Ocean Engineers, Korea, pp. 256-260.
  4. Dyer, I., Taylor, R. E., Newman J.N. and Price, W.G., 1990, Sea Loads on Ships and Offshore Structure, Cambridge University press, United Kingdom, pp.174-222
  5. Kim, D.G., "Dynamics of Structures," Goomibook, Korea, pp.671-699.
  6. 2005, Wind turbine - Part1 : Design Requirements, International Electrotechnical Commission(IEC) - 61400-1 Ed. 3.
  7. Sohn, J., Jang, J. and Yoo, W., 2010, "Multibody Modeling and Analysis of Floating Offshore Wind Power System," Trans. Of the KSME A, Vol. 34, No. 10, pp. 1350-1352.