• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.914-921
• /
• 2014

In this paper, an algorithm is suggested to detect an offset angle of the absolute rotor position sensor after the initial assembly of a PMSG. Unlike previous studies in a stationary state, this one is not designed to detect an electrical angle but rather the absolute position of the rotor is detected while operating the generator. Also,a position sensor, current sensors and voltage sensor were used to ensure reliability. This technique completes the detection of the sensor offset in two steps. In the first step, a zero-crossing of the EMF is measured using a voltage sensor to detect the electrical angle offset when the alternator is actuated by the engine. In the second step, a high frequency current is injected along the d-axis on-line during the control of the generation, eventually to obtain the inductance using a DFT (Discrete Fourier Transform), and then to ultimately extract the final electrical angle offset through the comparison of the inductance magnitude. The suggested algorithm was validated with PSIM simulation and, furthermore, was tested with actual experiments on a dynamometer.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.1-11
• /
• 2021

This study measures the change of ice flow velocity of David Glacier, one of the fast-moving glaciers in East Antarctica that drains through Drygalski Ice Tongue. In order to effectively observe the rapid flow velocity, we applied the offset tracking technique to Sentinel-1A SAR images obtained from 2016 to 2020 with 36-day temporal baseline. The resulting velocity maps were averaged and the two relatively fast points (A1 and A2) were selected for further time-series analysis. The flow velocity increased during the Antarctic summer (around December to March) over the four years' observation period probably due to the ice surface melting and reduced friction on the ice bottom. Bedmap2 showed that the fast flow velocities at A1 and A2 are associated with a sharp decrease in the ice surface and bottom elevation so that ice volumetric cross-section narrows down and the crevasses are being created on the ice surface. The local maxima in standard deviation of ice velocity, S1 and S2, showed random temporal fluctuation due to the rotational ice swirls causing error in offset tracking method. It is suggested that more robust offset tracking method is necessary to incorporate rotational motion.

• Current Research on Agriculture and Life Sciences
• /
• 제31권2호
• /
• pp.113-123
• /
• 2013

The carbon-offset mechanism based on forest management has been recognized as a meaningful tool to sequestrate carbons already existing in the atmosphere. Thus, with an emphasis on the forest-originated carbon-offset mechanism, the accurate measurement of the carbon stock in forests has become important, as carbon credits should be issued proportionally with forest carbon stocks. Various remote sensing techniques have already been developed for measuring forest carbon stocks. Yet, despite the efficiency of remote sensing techniques, the final accuracy of their carbon stock estimations is disputable. Therefore, minimizing the uncertainty embedded in the application of remote sensing techniques is important to prevent questions over the carbon stock evaluation for issuing carbon credits. Accordingly, this study reviews the overall procedures of carbon stock evaluation-related remote sensing techniques and identifies the problematic technical issues when measuring the carbon stock. The procedures are sub-divided into four stages: the characteristics of the remote sensing sensor, data preparation, data analysis, and evaluation. Depending on the choice of technique, there are many disputable issues in each stage, resulting in quite different results for the final carbon stock evaluation. Thus, the establishment of detailed standards for each stageis urgently needed. From a policy-making perspective, the top priority should be given to establishinga standard sampling technique and enhancing the statistical analysis tools.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.104-106
• /
• 2018

The harmonics and the DC offset in the grid can cause serious synchronization problems for grid connected inverters (GCIs) which leads not able to satisfy the IEEE 519 and p1547 standards in terms of phase and frequency variations. In order to guarantee the smooth and reliable synchronization of GCIs with the grid, Phase Locked Loop (PLL) is the crucial element. Typically, the performance of the PLL is assessed to limit the grid disturbances e.g. grid harmonics, DC Offset and voltage sag etc. To ensure the quality of GCI, the PLL should be precise in estimating the grid amplitude, frequency and phase. Therefore, in this paper a novel Robust PLL technique called Digital Lock-in Amplifier (DLA) PLL is proposed. The proposed PLL estimate the frequency variations and phase errors accurately even in the highly distorted grid voltage conditions like grid voltage harmonics, DC offsets and grid voltage sag. To verify the performance of proposed method, it is compared with other six conventional used PLLs (CCF PLL, SOGI PLL, SOGI LPF PLL, APF PLL, dqDSC PLL, MAF PLL). The comparison is done by simulations on MATLAB Simulink. Finally, the experimental results are verified with Single Phase GCI Prototype.

• ETRI Journal
• /
• 제29권3호
• /
• pp.408-410
• /
• 2007

A 9-bit 80-MS/s CMOS pipelined folding analog-to-digital converter employing offset-canceled preamplifiers and a subranging scheme is proposed to extend the resolution of a folding architecture. A fully differential dc-decoupled structure achieves high linearity in circuit design. The measured differential nonlinearity and integral nonlinearity of the prototype are ${\pm}0.6$ LSB and ${\pm}1.6$ LSB, respectively.

• 대한전기학회논문지
• /
• 제37권12호
• /
• pp.879-883
• /
• 1988

In this paper, self tuning control of interconnected systems are dealt in view point of large scale system control. The plant model is given in MIMO ARMA procss. This process is simlified as independent SISO ARMA processes having offset terma, which are considered as effects of interconnections. In each decentralized system, self tuning controller with instrumental variable method is adopted. As a result, this algorithm enables the paramter estimation to be unbiased and non-drift. This controller contains a new implicit offset rejection technique. Simulation results consider well with the analysis in case of linear interconnection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.129-131
• /
• 2000

A new analog synchronous mirror delay to be used in the wide-bandwidth clocking circuits is proposed to overcome the frequency dependency of the negative-delay values in the conventional analog synchronous mirror delay. The scheme adopts a new dummy-delay compensation technique by adopting the comparator with inherent systematic offset to achieve the enhanced negative-delay range especially prominent at high frequency applications.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.661-668
• /
• 2008

본 논문에서는 STO(Symbol Timing Offset)를 갖는 cooperative SFBC-OFDM 시스템에 적합한 파일럿 톤 기반의 채널 추정 기법을 제안한다. Cooperative SFBC-OFDM 시스템에서는 MS(Mobile Station)의 위치에 따라 RS(Relay Station)와 MS간 STO가 다르게 발생하며 이 STO가 위상 회전 형태로 왜곡을 발생시키기 때문에 orthogonal 파일럿 사용시 위상과 크기에 대하여 선형 보간을 취하여 채널을 추정하는 방법을 제안한다. 또한 orthogonal code를 사용하는 파일럿 구조에서는 비선형 방정식의 해를 구함으로써 채널 추정을 수행하는 방법을 제안한다. STO를 갖는 cooperative SFBC-OFDM 시스템에서 제안된 기법을 적용할 경우에 채널 추정 성능이 크게 개선될 수 있음을 모의실험을 통하여 확인한다.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.1-9
• /
• 2012

본 논문은 레이더 시스템에 적용되는 고성능 PLL 주파수 합성기를 설계하고, 그 성능을 분석하였다. 소형화제작을 위해 PLL 간접합성방식을 적용하였으며, 광대역특성에서 우수한 위상잡음과 고속의 주파수합성시간을 갖기 위해 offset 방식의 PLL에 DDS를 기준신호로 설계 하였다. 또한, offset PLL에서 고속의 주파수 변환을 위해 DAC를 이용하여 coarse tune을 적용하였다. 이러한 구조에서의 성능 예측을 위해 각각의 잡음원에 대해 모델링을 적용하여 출력위상잡음을 예측하였으며, 제작결과와 비교 분석하였다. 그 결과 simulation과 측정결과가 일치함을 확인하였으며, 100KHz 옵셋 주파수에서 -126dBc/Hz의 우수한 위상잡음 특성과 10usec 이내의 고속의 주파수변환시간을 갖는 항공기용 레이더 주파수합성기를 설계하였다.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1861-1868
• /
• 2014

주파수 오차는 송 수신기내의 발진기의 오차와 송수신기의 이동속도에 의한 도플러 효과(doppler effect)로 인해 발생하는데 이러한 오차는 수신신호의 위상을 변화시켜 수신기의 성능을 떨어뜨리는 주요 요인 중 하나이다. 따라서 주파수 오차의 정밀한 추정 및 보상은 송 수신기의 필수적인 요소이다. 본 논문은 이러한 주파수 오차를 부분 상관을 이용하여 추정하는 새로운 방식을 제안하는데, 기존 방식에 비해 낮은 복잡도를 가진다. 또한 제안하는 방식은 주파수 추정 정확성의 손실 없이 주파수 오차 보상 범위의 조절이 가능하여 넓은 주파수 오차가 존재하는 시스템에 적합하다. 제안 방식의 검증을 위해 컴퓨터 모의실험 결과를 수행하고, 기존의 기법과 비교 분석하여 성능 및 복잡도에 이득이 있음을 보인다.