• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.21-26
• /
• 2002

In this study, the characteristics of long period waves are analyzed by field observation at Sokcho harbor on the eastern coast of Korea. firstly. the pressure data obtained from field observation are transformed into water surface elevations and the wave by wave analysis is applied to the observed wave data. also, we select long period waves by setting up the range 30-200sec, and suggest the relationship between ordinary waves and long period waves using the concept of the significant wave height. and, we examine the effects oft he long period waves on the rate of the harbor operation. The observation results demonstrate that the long period waves with heights of 1.2-14.6cm and periods of 35.8-162sec exist at Sokcho harbor. also, we found the rates of harbor operation based on long period waves are 61.8%-99.5% lower than the usual rates of 93.8%-100%.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.155-158
• /
• 2009

본 논문에서는 DLR(German Aerospace Center)에서 운영하는 TerraSAR-X를 이용하여 2009년 1월 19일 18:28 (Local time) 에 서해 대부도/제부도 및 대부도 남쪽 해안을 촬영한 stripmap mode (Dual-Pol: HH, VV) 화상을 취득하여 향후 고해상도 X-밴드 화상의 활용 방안 및 효용성에 대해 검토해 보았다. 함께 취득된 현장자료와의 비교를 통하여 2010 년에 발사될 예정인 아리랑 5 호의 활용방안을 찾고자 한다. 여기서는, 연안에 설치된 양식시설, 소형 선박 그리고 코너리플렉터에 대해서 해석을 수행하였다. 김 양식시설의 경우, 구조와 설치 각도에 따라 다른 후방산란특성을 보였으며, 같은 시설에 대해서도 HH 편파의 후방산란계수가 VV 보다 2.6 dB 높게 나타났다. 그 이유는 김 양식시설이 TeraSAR-X의 전파전파 방향과 수직하게 되어 후방 산란이 많이 일어나는 반면에, B 지역에 설치된 김 양식시설은 TeraSAR-X의 전파전파방향과 약 45 도 비스듬하게 설치되어 있어, 상대적으로 낮은 후방산란계수를 나타내기 때문이다. 또한 한 변의 길이가 각각 1 m, 0.6 m 인 사각면 삼각 수동 전파반사기 두 개를 제부도 북쪽의 갯벌에 설치하여 TerraSAR-X 의 화상에 나타난 후방산란특성을 분석하였다. TerraSAR-X 의 화상이 X-밴드를 사용하고, 높은 해상도로 인해 power spill이 넓게 분포하는 것을 볼 수 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.109-119
• /
• 2012

Long-term wave observation was carried out near Busan New Port and the major wave characteristics were analyzed. At Busan New Port, waves from south direction were predominant throughout the year, while waves from the west, developed at the north sea of Geoje island, appeared almost the same frequency in winter season, showing apparent seasonal variation. During the observation period, the significant wave height was mostly less than 1 m, but it reached its maximum of 8.0 m when typhoon Maemi passed on September 2003. Also, the seasonal variation was hardly observed except July. In contrast, seasonal variation was apparent for the significant wave period, whose peak ranges 4~5 s in summer whereas about 3 s in winter. The largest significant wave period was 15.56 s, observed on June 2003. Meanwhile, the annual variation was negligible for mean wave direction as well as significant wave height and period. Further analysis of the wave data acquired for 5 years at 4.5 km south, in the south sea of Daejuk island, confirmed high correlation between the two observation points in summer and vice versa in winter.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.198-210
• /
• 2022

The southern strait of Jeju is a divergence point of the Tsushima Warm Current (TWC), and it is the starting point of the thermohaline circulation in the waters of the Korean Peninsula, affecting the size and frequency of marine disasters such as typhoons and tsunamis, and has a very important oceanographic impact, such as becoming a source of harmful organisms and radioactively contaminated water. Therefore, for an immediate response to these maritime disasters, real-time ocean observation is required. However, compared to other straits, in the case of southern Jeju, such wide area marine observations are insufficient. Therefore, in this study, surface current field of the southern strait of Jeju was calculated using High-Frequency radar (HF radar). the large surface current field is calculated, and post-processing and data improvement are carried out through APM (Antenna Pattern Measurement) and FOL (First Order Line), and comparative analysis is conducted using actual data. As a result, the correlation shows improvement of 0.4~0.7 and RMSE of about 1~19 cm/s. These high-frequency radar observation results will help solve domestic issues such as response to typhoons, verification of numerical models, utilization of wide area wave data, and ocean search and rescue in the future through the establishment of an open data network.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.182-189
• /
• 2016

In this paper, we propose a buoy system based on multi-hop relay networks for ocean observation. The proposed system consists of various sensor modules, a gateway, wireless communication modules, and a remote monitoring site. The sensor modules are integrated with various communication interfaces and connected to the gateway of the proposed buoy system with an unified protocol based on controller area network (CAN)-bus. In order to communicate with the remote monitoring site and extend the coverage, the proposed system uses long-term evolution (LTE) router and XBee mesh network modules. The field test results show that the proposed system can extend the coverage using the proposed multi-hop relay network.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.607-614
• /
• 2019

It has been an issue among researchers that the tsunamis that occurred on the west coast of Japan in 1983 and 1993 damaged the coastal cities on the east coast of Korea. In order to predict and reduce the damage to the Korean Peninsula effectively, it is necessary to install offshore tsunami observation instruments as part of the system for the early detection of tsunamis. The purpose of this study is to recommend the optimal deployment of tsunami observation instruments in terms of the higher probability of tsunami detection with the minimum equipment and the maximum evacuation and warning time according to the current situation in Korea. In order to propose the optimal location of the tsunami observation equipment, this study will analyze the tsunami propagation phenomena on the east sea by considering the potential tsunami scenario on the west coast of Japan through numerical modeling using the COrnell Multi-grid COupled Tsunami (COMCOT) model. Based on the results of the numerical model, this study suggested the optimal deployment of Korea's offshore tsunami observation instruments on the northeast side of Ulleung Island.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.141-144
• /
• 2006

The tidal pi lot plant is being built in the Uldolmok waterway using Its strong tidal current with maximum current of about 12knots, which is revealed from the first direct observation using ADCP, on February, 2002. a serious of field observations (for example, ADCP observation was tarried out both at February 2002 and September, 2003), along with numerical modeling, have been carried out over the last several years, in order to understand the tidal dynamics and to examine the related variables according to the tidal current power plant (TCPP) operation.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.199-202
• /
• 2007

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean observation and meteorological observation. Conventional thermal control design, using MLI (Multi Layer Insulation), OSR (Optical Solar Reflector), heater and heat pipe, is utilized. Ka-band components are installed on South wall, while other equipment for sensors are installed on the opposite side, North wall. High dissipating communication units are located on external (surface) heat pipe and are covered by internal insulation blankets to decouple them from the rest of the satellite. External satellite walls are covered by MLI or OSR for insulation from space and for rejection internal heat to space. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. Single solar array wing is adopted in order to secure clear field of view of radiant cooler of IR meteorological sensor. This paper presents principles of thermal control design for the COMS.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.233-239
• /
• 2003

Coastal wave and tide information is very important in various occasions for port and harbor engineers, in the stages such as port and harbor planning, maritime structure design, maritime construction management, and coastal disaster study This paper introduces recent improvement of Japanese coastal wave-tide observation and information system named as NOWPHAS (Nationwide Ocean Wave information network for Ports and HArbourS). Development and improvement of the NOWPHAS has been achieved during recent decade in the following points of view (Nagai,2002a,2002b). (omitted)

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1377-1386
• /
• 2017

We propose a smart ocean meteorological observation system which is capable of real-time measurement of vulnerable marine climate and oceanographic conditions. Besides, imported products have several disadvantages such that they can't be measured for a long time and can't transmit data in real time. In the proposed system, smart ocean observation digging system, it observes real-time ocean weather with data logger methods. Furthermore, we also use existing dataloggers functions with various sensors which are available in the ocean at the same time. Also, we applied the Kalman-filter algorithm to the ocean crest measurement to reduce the noise and increase the accuracy of the real-time wave height measurement. In the experiment, we experimented the proposed system with our proposed algorithms through calibration devices in the real ocean environment. Then we compared the proposed system with and without the algorithms. As a result, the system developed with a lithium iron phosphate battery that can be charged by a system used in the ocean and minimized power consumption by using an RTC based timer for optimal use. Besides, we obtained optimal battery usage and measured values through experiments based on the measurement cycle.