• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.25-31
• /
• 2009

The most important component of wind turbine is rotor blades. The developing method of wind turbine was focused on design of rotor blade. By the way, the design of a rotating body is more decisive process in order to adjust the performance of wind turbine. For instance, the design allows the designer to specify the wind characteristics derived by topographical map. The iterative solver is then used to adjust one of the selected inputs so that the desired rotating performance which is directly related to power generating capacity and efficiency is achieved. Furthermore, in order to save the money for manufacturing the rotor blades and to decrease the maintenance fee of wind power generation plant, while decelerating the cut-in speed of rotor. Therefore, the design and manufacturing of rotating body is understood as a substantial technology of wind power generation plant development. The aiming of this study is building-up the profitable approach to designing of rotating body as a system for the wind power generation plant. The process was conducted in two steps. Firstly, general designing and it’s serial testing of rotating body for voltage measurement. Secondly, the serial test results above were examined with the CFD code. Then, the analysis is made on the basis of amount of electricity generated by rotor-blades and of cut-in speed of generator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2012

It is necessary to construct the process automation system to improve the design efficiency and procure the higher design quality on the field of ship building. To construct this system, the shipbuilding companies should improve the 3D CAD/CAM system customized to the ship design and the software about design information management which could solve the conflict problem between the several related design division at the same time. The typical example is the Hole-plan process in the ship-building design. For the request of additional holes from outfitting division, the hull design division checks the compatibility conditions and reflects these holes to the hull panels if acceptable. if not, the requests are rejected and sent back to the outfitting division. These serial processes are not simple and require the tedious communication, discussion, and the complicated drawings. This article gives a basic introduction to the process of hole-plan system and proposes a strategy to automate its process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.476-485
• /
• 2014

PBL is a student-centered pedagogy in which students learn about a subject through the experience of problem solving. Marine engineer is the expert which supports the safe navigation and solves the problems could happen in independent situation as a ship. This study executed the fundamental study on the maritime training education for marine engineers using PBL. In this study, we conducted the survey on 56 students for 6 months using PBL in H university. The result showed the improvement on ability to solve the problems, interpersonal relationship, communication skill, synthetic thinking faculty and practical use of data but some students answered the complaint of the insufficient information and unacquainted learning method of PBL. This suggested the development and improvement plans for the maritime training education using PBL based on this fundamental study.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.147-157
• /
• 2016

The trend of globalization and the development of the communication-Information technology have led the organization of a complex supply chains which are more vulnerable to risks. The impact of risk on the supply chain can be adverse so importance of risk management on a supply chain has increased. In order to analyze the risk factors of transport system, this study described about the definition of transport risk and investigated the relationship between likelihood index and effect index of each risk factor. We identified risk factors on transport system and measured likelihood index and effect index of each risk factor. Finally, a numerical risk index, which is a value of total transport system, has been resulted by aggregating all indices. In addition, a case study using the proposed method has done on a heavy vehicle transport context with a transport company.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.247-260
• /
• 2016

Sensor networks have been used in many applications such as smart home, smart factory, etc. based on sensor data. Sensor networks can change system requirements and architectures depending on their application areas. Currently, sensor network application cases in ocean environments are very rare because the ocean environments have much difficult accessibility more poor conditions, higher wave heights, more frogs, much heavier salinity, etc., compared with ground environments. In this paper, we propose the requirements, architecture and design of a sensor network system for the littoral sea cage culture monitoring and we also introduce its operation results through the development. The developed system based on our research provides users with functionalities to extract, monitor, and manage underwater environmental conditions suitable to littoral sea cage culturing of fishes.

• ETRI Journal
• /
• v.42 no.4
• /
• pp.575-584
• /
• 2020

Electromagnetic (EM) waves used to send signals under seawater are normally restricted to low frequencies (f) because of sudden exponential increases of attenuation (𝛼) at higher f. The mathematics of EM wave propagation in seawater demonstrate dependence on relative permeability (𝜇_r), relative permittivity (𝜀_r), conductivity (𝜎), and f of transmission. Estimation of 𝜀_r and 𝜎 based on the W. Ellison interpolation model was performed for averaged real-time data of temperature (T) and salinity (S) from 1955 to 2012 for all oceans with 41 088 latitude/longitude points and 101 depth points up to 5500 m. Estimation of parameters such as real and imaginary parts of 𝜀_r, 𝜀_r', 𝜀_r", 𝜎, loss tangent (tan 𝛿), propagation velocity (V_p), phase constant (𝛽), and α contributes to absorption loss (L_a) for seawater channels carried out by using normal distribution fit in the 3 GHz-40 GHz f range. We also estimated total path loss (L_PL) in seawater for given transmission power P_t and antenna (dipole) gain. MATLAB is the simulation tool used for analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.466-475
• /
• 2014

The IVEF service is the draft standard designed for exchange of information on sea traffic between the vessel traffic systems and between the vessels. Standardization of this service is under way as a part of the next-generation navigation system, called e-Navigation. The International Association of Lighthouse Authorities (IALA) suggests, on its recommendation V-145, the IVEF service model and the protocol for provisioning of this service. But the detailed configuration of this service must be designed by the users. This study suggests, based on the basic service model and protocol provided in the recommendation V-145, the implementation of the J-VTS middleware which will facilitate exchange of information on sea traffic. The J-VTS middleware consists of various components for providing the IVEF service and for processing the IVEF message protocols. The vessel traffic systems and the vessels corresponding to upper-layer applications may use the IVEF service with the functions provided by the J-VTS middleware, and the services are designed to be accessed according to the security level of users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1193-1199
• /
• 2015

Studies applying multiple carrier method such as OFDM(Orthogonal Frequency Division Multiplexing) or FMT(Filtered Multi-Tone) to Underwater acoustic communication(UAC) system are actively under way as UAC is utilized in the various fields and the demand of high speed data transmission increases. In the existing OFDM method, the use of virtual carrier, which is inserted not to affect the adjacent channel in the frequency domain, and the cyclic prefix, which is used to reduce the impact of Inter Symbol Interference and Inter Channel Interference, decrease the throughput. In particular, the length of cyclic prefix to be used becomes longer under water since underwater has a rapidly changing channel characteristic, and the data throughput diminishes because it has to allocate more subcarrier on virtual carrier. This study therefore suggests FMT-OFDM system, a combination of OFDM and FMT, for the purpose of enhanced throughput in the underwater channel environment. Besides, in this study, channel is modeled based on data measured in real sea and the performance is analyzed after setting system parameters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.543-551
• /
• 2020

In this paper, we introduce a method to improve the accuracy of the length estimation of targets using a radar. The HRRP (High Resolution Range Profile) obtained from a received radar signal represents the one-dimensional scattering characteristics of a target, and peaks of the HRRP means the scattering centers that strongly scatter electromagnetic waves. By using the extracted scattering centers, the downrange length of the target, which is the length in the RLOS (Radar Line of Sight), can be estimated, and the real length of the target should be estimated considering the angle between the target and the RLOS. In order to improve the accuracy of the length estimation, parametric estimation methods, which extract scattering centers more exactly than the method using the HRRP, can be used. The parametric estimation method is applied after the number of scattering centers is determined, and is thus greatly affected by the accuracy of the number of scattering centers. In this paper, in order to improve the accuracy of target length estimation, the number of scattering centers is estimated by using AIC (Akaike Information Criteria), MDL (Minimum Descriptive Length), and GLE (Gerschgorin Likelihood Estimators), which are the source number estimation methods based on information theoretic criteria. Using the ESPRIT algorithm as a parameter estimation method, a length estimation simulation was performed for simple target CAD models, and the GLE method represented excellent performance in estimating the number of scattering centers and estimating the target length.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1767-1772
• /
• 2021

Global satellite observation surface albedo data over a long period of time are actively used to monitor changes in the global climate and environment, and their utilization and importance are great. Through the generational shift of geostationary satellites COMS (Communication, Ocean and Meteorological Satellite)/MI (Meteorological Imager sensor) and GK-2A (GEO-KOMPSAT-2A)/AMI (Advanced Meteorological Imager sensor), it is possible to continuously secure surface albedo outputs. However, the surface albedo outputs of COMS/MI and GK-2A/AMI differ between outputs due to Differences in retrieval algorithms. Therefore, in order to expand the retrieval period of the surface albedo of COMS/MI and GK-2A/AMI to secure continuous climate change monitoring linkage, the analysis of the two satellite outputs and errors should be preceded. In this study, error characteristics were analyzed by performing comparative analysis with ground observation data AERONET (Aerosol Robotic Network) and other satellite data GLASS (Global Land Surface Satellite) for the overlapping period of COMS/MI and GK-2A/AMI surface albedo data. As a result of error analysis, it was confirmed that the RMSE of COMS/MI was 0.043, higher than the RMSE of GK-2A/AMI, 0.015. In addition, compared to other satellite (GLASS) data, the RMSE of COMS/MI was 0.029, slightly lower than that of GK-2A/AMI 0.038. When understanding these error characteristics and using COMS/MI and GK-2A/AMI's surface albedo data, it will be possible to actively utilize them for long-term climate change monitoring.